
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탈중심화 기법이 범불안장애 성향자의 걱정 및 불안에 미치는 영향
본 연구의 목적은 탈중심화 기법이 범불안장애 성향자의 걱정 및 불안에 미치는 영향을 알아보는 것이다. 이를 위해 만 18세 이상의 성인 621명을 대상으로 PSWQ, GAD-7, CES-D 척도에 응답하도록 하였다. 이 중, PSWQ 점수가 56점 이상이면서 GAD-7 점수가 8점 이상이고, 참여에 동의한 47명을 처치집단에 25명, 통제집단에 22명 무선할당하였다. 처치집단에는 탈중심화 프로그램이, 통제집단에는 표현 글쓰기가 제공되었다. 탈중심화 프로그램은 거리 두기, 생각과 감정 물체화하기 등의 다양한 탈중심화 기법으로 구성되었다. 프로그램 전, 후, 추후 각각 경험회피, 걱정, 불안을 측정하였고, 분석은 반복측정 분산분석 및 대응표본 t검정을 시행하였다. 그 결과, 처치집단의 경험회피, 걱정, 불안이 유의하게 감소하였다. 본 연구에서는 탈중심화 프로그램이 범불안장애 성향자들의 경험회피, 걱정, 불안에 효과적인 개입임을 확인하였으며, 마지막으로 연구 결과를 토대로 본 연구의 의의와 한계점, 추후 연구에 대한 제언을 기술하였다. This study aims to investigate the effect of decentering technique on worry and anxiety of adults with generalized anxiety disorder symptoms. 621 individuals were asked to answer PSWQ(Penn State Worry Questionnaire), GAD-7(Generalized Anxiety Disorder 7-item), and CES-D(Center for Epidemiologic Studies Depression Scale). Individuals with a PSWQ score of 56 or more and a GAD-7 score of 8 or more were selected and 47 of them participated in. They were randomly assigned to two group: treatment group(n=25), control group(n=22). Decentering program was provided to treatment groups, and expressive writing was provided to control groups. Decentering program was composed of various decentering techniques (self-distancing and Physicalizing Exercise, etc.). Experiential avoidance, worry and anxiety were measured at pre, post, and follow-up period. For analysis, repeated measure ANOVA and paired t-test were conducted. As a result, treatment group showed significant decrease in experiential avoidance, worry and anxiety. This study demonstrated that decentering program has effectiveness on reducing experiential avoidance, worry and anxiety of individuals with generalized anxiety disorder symptoms. Finally, implications, limitations and the direction for the further study are provided.
과세유형이 세무대리서비스 품질과 세무대리서비스 만족도에 미치는 영향
After the financial crisis, tax agents market has suffered an intensifying competition. The pressure of the openness in service market leads to the increasing number of tax agents and the easy acess to internet has brought a generalization of tax related knowledge and a considerable change in the relationship between tax agents and the users of tax agents. The concept of consumer-rights demends a high level of tax agents service qualities. So, tax agents need to upgrade their service qualities to overcome such a competition, to maintain their customers and to recruit their new users. The users of tax agents are devided into two groups, VAT payer or Non payer, according to their tax type. It is a prerequisite to confirm whether tax type has a different effect on tax agnents' service qualities and customer's satisfaction. This study aimed at confirmming the differences in the two groups and developing a multiple regression model and examining of its empirical test results. The model was to analyze the influence of tax type on the tax agents' service qualities and customer's satisfaction. To accompolish this objects, 400-questionnaires were sent to the users of tax agents in the Pusan and Kyung nam area. the 231-data were collected. Among them, 11-unsuitable questionnaires were discarded and the rest 220-questionnaires were used for the statistic analyses. First, there are 3 questions about the object of using tax agents, considering factor in choosing tax agents and changing factor. second, because there could be a correlation between 30 items on tax agent service qualities, a factor analysis was done to compress them to a smaller number of meaningful variables. As a result, five parameters were divided. To analyze the factors influencing on user's satisfaction, 5 variables under tax agent service qualities, tax type and 3 other variables were used as independent variables and user's satisfaction was used as a dependent variable. As a result of analysis, the type of tax payers has a strongly positive influence on user's satisfaction. but the type of tax payers has a different influence in term of direction on the five parameters. In other words, the type of tax payers has a negative influence on supporting and exante activity, but a positive influence on functional and sympathetic activity. In conclusion, to maximize the user' satisfaction on tax service qualities, tax agents need to provide a discriminative tax service qualities to the users of tax agent according to the type of tax payers.
무 지지세포 (feeder-free) 환경에서 히스톤 탈아세틸효소 저해제들을 이용한 인간배아줄기세포와 유도만능줄기세포의 배양방법
김형택 차의과학대학교 대학원 2012 국내석사
인간 배아줄기세포(human embryonic stem cell ; hESC)는 미분화 상태를 유지하며 무한 증식할 수 있는 능력과 인체의 모든 조직과 세포로 분화할 수 있는 전분화능을 가지고 있다. 이러한 특성을 활용하여 다양한 종류의 세포로 분화를 통해 질병치료를 위한 치료제로써의 가능성을 가지고 연구가 활발히 진행되고 있다. 최근 인간만능줄기세포, 즉 인간배아줄기세포와 유도만능줄기세포들을 특정 세포로 분화시켜 신약 스크리닝이나 치료제 효능평가, 혹은 독성평가의 세포모델로 활용하고자 하는 연구가 활발히 진행이 되고 있다. 이러한 세포모델들은 기존의 방법에 의해 소모되었던 과도한 시간, 비용, 과 인력을 줄일 수 있는 기회를 제공해 주고 있다. 전통적으로 인간 배아줄기세포의 배양은 일반적으로 생쥐 배아섬유세포(mouse embryonic fibroblast)와 같은 동물유래 지지세포 위에 세포를 배양한다. 하지만, 지지세포를 사용하는 경우 신약 스크리닝이나 효능 및 독성평가 시 지지세포의 변형에 기인한 실험결과 분석 상의 오류를 유발할 가능성이 매우 크기 때문에 극복해야 할 문제가 되어왔다. 또한 고속대량 스크리닝 (high-throughput screening)시 지지세포 접종은 시간, 비용, 노력이 많이 들게 하고 실험결과의 신뢰도에 영향을 많이 주게 된다. 본 연구에서는 히스톤 탈아세틸효소 저해제(histone deacetylase inhibitors)들을 이용한 후성학적인 조절(epigenetic control)을 통해 무지지세포 하에서도 인간만능줄기세포를 배양할 수 있는 배지를 조성하고 이들의 배양효능을 분석하는데 초점을 맞추었다. 대표적인 히스톤 탈아세틸화 저해제인 Sodium butyrate, Valproic acid, Trichostatin A를 사용 했을 때 비슷한 효율을 보였으며, 점착률과 성장속도에 있어서도 배양되어 안정적인 배양을 할 수 있었다. 배양된 배아줄기세포는 면역형광 염색과 유전자 발현에서도 미분화와 분화가 잘 유지되고 있음을 확인하였고, 안정적인 배양으로 적합하다는 것을 확인하였다. Human pluripotent stem cells (hPSCs) such as human embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs) retain the capacity to self-renew and differentiate into cells of all three germ layers of the body. These unique properties of hiPSCs make them an ideal cell source for cell-replacement therapies to treat many incurable diseases. Conventionally, hESCs have been cultured on feeder cells such as mouse embryonic fibroblasts (MEFs) which often ham-per successful genetic modification or screening of small molecules. In the previous study, we reported that sodium butyrate, a histone deacetylase inhibitor (HDACi), can replace basic fibroblast growth factor in culture of hESCs using MEFs as feeder cells. However, the effects of HDACis in a feeder-free culture condition were yet to be investigated. Here we set out to explore whether various HDACIs played any role in culture of hPSCs without differentiation. We found that the three commonly used HDACis, sodium butyrate, valproic acid, and trichostatin A supported undifferentiated growth of hESCs and hiPSCs efficiently. In addition, the HDACi-containing culture media also supported stable cell attachment to the bottom of vitronectin-coated dishes during each passage. The expanded hPSCs were shown to express undifferentiation markers at a significant level, while the expression of three germ layer markers was very low. Karyotyping analysis revealed no abnormal change in the chromosomes after culture of hPSCs in these HDACi-containing media. Taken together, our results suggested that HDACis can be useful to design media that can support undifferentiated growth of hPSCs in the absence of feeder cells. Keywords : human embryonic stem cells, human induced pluripotent stem cells, feeder-free culture, histone deacetylase inhibitor
전자처리 스페클 패턴 간섭법(ESPI)을 이용한 복합재료의 진동 특성 해석에 관한 연구
The ESP1 ( : Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique that allows static and dynamic deformation analysis and surface shape measurements of engineering structures, e. g. turbine blades, car engine components and body panels, etc. This technique is very similar to holographic interferometry but uses a solid static camera and an image processing board for recording and digital processing of speckle patterns. During vibration, the phase of the object is moving and so is the speckle pattern too. This phenomenon is used to detect the frequency of the vibration. Composite materials have various complicated characteristics depending on the ply materials, ply orientations, ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite materials. For efficient use of composite materials in engineering applications, the dynamic behavior such as, natural frequencies and modal patterns should be identified. This studying presents FEM results for the free vibration of symmetrically laminated composite as [30/-30/90]_(s). The natural frequencies of laminated composite rectangular plates having the boundary condition(: 2-edge clamped) are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.
등록가 산정 방식에 관한 연구 : 코스닥 시장을 중심으로
김형택 漢陽大學校 國際金融大學院 2000 국내석사
코스닥 시장은 우리나라 중소기업과 벤처기업의 자금 조달을 위하여 미국의 나스닥 시장을 벤치 마킹한 직접 금융시장으로, 유가증권을 발행하여 자금의 공급자인 가계나 금융기관으로부터 자금을 공급 받는 추상적인 시장이며 가계의 소규모 자금을 모아 장기적이고 안정적인 기업자금으로 전환시켜주는 역할을 한다. 코스닥 등록 법인은 매년 꾸준한 증가세를 보이고 있으며 1999년을 기점으로 급격한 성장세를 보이고 있으나, 정부의 지원 정책에도 불구하고 코스닥 시장의 전체 금액 중 차지하는 비중과 등록 금액면에서는 벤처기업에 비해 여전히 일반 기업이 높은 비중을 차지하고 있다. 코스닥 시장은 중소기업과 벤처기업에게 직접금융으로써 자본을 조달해준다는 커다란 장점이 있음에도 불구하고 상당히 많은 문제점을 안고 있다. 특히 최근에 일어나고 있는 일련의 문제들은 그 심각성에 대한 경종을 울리고 있다. 특히 경영주의 도덕성 문제와 기업의 윤리성에 대해서는 상당히 많은 제도의 설립과 보완이 필요한 실정이며, 최근 발생하고 있는 주가 조작과 같은 일련의 상황이 발생하지 않도록 각종 기관의 적극적인 대처가 필요한 시점이다. 기업의 코스닥 시장 등록가는 시장 매매의 기준이 되는 중요한 지표로써 등록 후 주식 최초 거래에 있어 가장 중요한 지표의 역할을 담당한다. 그러나 상당 수의 기업의 본질 가치에 비해 300% 이상을 넘는 등록가 결정율을 보이고 있다. 즉, 기업이 가지고 있는 실질적인 가격은 100원에 불과하나 기업의 가치를 300원으로 평가하는 것이다. 이처럼 높은 등록가 결정율을 보이는 경우는 경쟁사 또는 선발 동종 업계가 높은 등록가를 보인 경우 더욱 심하게 나타난다. 또한 일반적인 제조업체 보다는 첨단 업종이라 할 수 있는 인터넷 등 IT업계와 금융권 기업에서 이러한 현상이 두드러지게 나타나며, 기업이 적자를 보이고 있고, 예상 매출액에 못 미치는 등 매출이 극히 부진한 경우에도 등록가 결정율이 200%를 넘는 기업도 있다. 이에 일반 투자자들과 기관 투자자들이 회사의 가치 및 기업의 신용도를 평가하는데 기본적으로 사용하고 있는 기업 부채율과 유보율을 이용하여 새로운 등록가 산정 모델을 작성되었으며, 새로운 등록가 산정방식 모델은 2000년 4월부터 2000년 7월까지 코스닥에서 거래가 시작된 종목 중 30개의 업체를 중심으로 분석하여 제시하였다. 일반적인 수치를 비교해 보았을 때 신규 등록가 산정모델에서 얻어진 등록가가 기존 등록가 산정방식에 비해 4배의 정확성을 보였다. 분포도 면에서도 신규 등록가 산정 방식은 기존방식에 비해 일정한 분포도를 나타내고 있다. 이것은 신규 등록가 산정방식 모델이 기존의 등록가 산정방식에 비해 비교적 객관적인 평가 방식에 진행되었다는 것을 반증한다고 볼 수 있다. 본 논문은 회사의 유보율과 부채비율만을 평가의 자료로 삼았으나 이보다 더 객관적인 산정 방식도 있으리라 믿으며, 이러한 방식을 미래의 논문에서 반드시 볼 수 있기를 바란다.
中小企業의 ERP 適用을 위한 生産SYSTEM 革新에 관한 硏究 : 自動車部品製造業體의 生産性 管理 모듈을 中心으로
Perceiving that although national compaines have imprted ERP(Enterprise Resource Planning) which is used for the improvement of a company's competitige power by an number of prominent companies all over the world and has proved its value, a large number of the companies of our country cannot get any special advantage from it. this research, applying to the compaines that manufacture automobile machine parts,especially to small-to-middle sized ones, considered positively the differnces between the companies which apply ERP effectively to their management system and the companies that cannot do that. For reference, among the six objects of this study which were compared, three of them select domestic one(UNIERP) and the other foreing one(SAP R/3). This research consists of six parts, the first part of which is an introduction, that sets the range, purpose, and the method of the study. In thesecond part, it introduces the definition and the present information-utilizing condition of small-to-middle sized enterpriese, and the concept, the background of import, the process of development, and the traits of ERP and classified packages by the criterion of module. In the next section, I have surveyed the information about the innovation of a system and prductiveity management therortically. In the 4th section, among many kinds of ERP solution, it goes over domestic UNERP and foreign SAP R/3 limiting to the modules that have relation to productivity and introductes some examples of advance preparation the compaines which are managing ERP successufully have done before they import it in the following section. Finally, the last part is conclusion, that summarizes this research and points out th limitations of it. The conclusion of this study is that to take advantage of the ERP module related to production more effectively, companies have to try to make customers trust the quality of goods and understand the process of work by means of removing waste in the working place and making into a code throroughtly. To say more strictly, ERP is just a tool that gets hold of various pheonomena and the analyze them only with given data. In this point, it might be daid that it exists on a higher level than any other managing tools. Howeverm to digest it more intentively, fundamental problems are under what system the data input are mode, how much the data is accurate, how much constantly the system is maintained and managed, and who inputs the data. I wonder how it can be possible to input accurate data into ERP software under the circumstance that keeping work record is not done well and how it can be said that the import of ERP is valuable for the company in the low line balance efficiency. The most failure of the many companies that imported an excellent management-reforming tool such as ERP results form perfunctorily inputting data to a computer disregarding the culture of enterprise and adhering to a managers will without foundation work through constant studies and betterments. It is expected that more improved solutions than ERP will be introduced. However, no matter what a superior software solution is imported, it would be impssible that the companies that manufacture automobile machine parts achieve success as they wish without will to make it better and executive ability.