http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Effect of Nanoscaled SiO2 Coating on Luminescent Properties of Blue Phosphors
김혁종,정영규,김희규,최병호 대한금속·재료학회 2008 ELECTRONIC MATERIALS LETTERS Vol.4 No.3
An investigation is reported on the growth of SiO2 nano-film on BaMgAl10O17:Eu+ blue phosphors using atomic layer deposition. Silicon oxide films were prepared at room temperature using Si(OC2H5)4, C2H5N and H2O as precursor, catalyst and reactant gas, respectively. XPS analysis showed the surface composition of coated phosphor powder was silicon oxide. In TEM and FESEM analysis, the growth rate was about 0.66 Å/cycle and the surface morphology became smoother than that of uncoated powder. The photoluminescence intensity for coated phosphors was 0.6~11.3% higher than that of uncoated
광원자층증착법에 의한 glass 기판에 TiO<sub>2</sub> 박막 코팅
김혁종(Kim, Hyug-Jong),김희규(Kim, Hee-Gyu),김도형(Kim, Doe-Hyoung),강인구(Kang, In-Gu),최병호(Choi, Byung-Ho) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
염료감응형 태양전지의 구성체 중 전극으로 연구 되어 지고 있는 TiO₂는 기존에 대량 생산이 가능한 spin coating법, screen printing법, spray법의 연구가 이루어져 왔으나 고 효율 태양전지에 쓰이는 전극 시스템에 비해 고 분산성을 지닌 TiO₂페이스트를 제조 하는데 어려움이 있다. 그리고 플렉시블 디스플레이 소자의 응용을 위해서는 소자 공정 온도인 250?C 이하의 공정 온도가 요구 되어 지므로 고온공정인 CVD법은 이에 적합하지 않다. 이에 본 연구는 진공 증착 방법인 광원자층증착법을 이용하여 150?C이하의 저온공정온도에서도 적용이 가능한 TiO₂ 박막을 185nm의 UV light를 조사하여 glass 기판위에 제조 하고 그에 따른 박막의 물성 분석을 하였다. Mo source로는 titanium tetraisopropoxide(TTIP)와 reactant gas 로는 H₂O를 사용하였으며 불활성 기체인 Ar 가스는 purge 가스로 각각 사용하였다. 100?C{sim}250?C 공정온도를 변수로 TiO₂ 박막을 제조 하였으며 제조된 TiO₂ 박막의 물성 분석을 위해 FESEM, TEM을 이용하여 표면 및 두께를 분석하였다. 또한 100?C 400 cycles에서 약 12nm 막 두께를 관찰 할 수 있었으며 그 결과 박막의 성장률이 0.3{AA}/cycle 임을 확인 할 수 있었다. 그리고 UV-VIS을 이용하여 박막의 좌외선에 대한 흡수도 및 투과도 분석을 하였다. 또한 XPS 성분 분석을 통하여 100?C의 저온 공정에서 형성된 박막이 TiO₂임을 확인 하였다. 이러한 결과에서 185nm의 UV light에 의한 광원자층 증착법으로 100?C의 저온에서도 TiO₂ 박막이 증착 되는 것을 확인 할 수 있었다.
김정국,김혁종,고원일,구정회,남효온,Kim, Jeong-Guk,Kim, Hyuck-Jong,Ko, Won-Il,Ku, Jeong-Hoe,Nam, Hyo-On 한국시스템엔지니어링학회 2017 시스템엔지니어링학술지 Vol.13 No.2
Pyro project, one of complex project, is now under research and development. To manage this kind project successfully, it is essential to apply the processes of technical management (TM) based on systems engineering (SE) and project management (PM). In this paper, the project management processes from ISO-21500 standard, PMBOK guide, and PRINCE2 guide were reviewed, and then some common PM for the large national R&D project were selected. An integrated technical management and project management frame work was finally established and suggested for Pyro project.