주변도로 분포가 학교건축물의 소음실태에 미치는 영향에 관한 연구

김태우,이강국,홍원화,Kim, Tae-Woo,Lee, Kang-Guk,Hong, Won-Hwa 한국교육시설학회 2011 敎育施設 Vol.18 No.4

This study investigates interior and exterior environments and arrangement forms of school buildings from elementary to high school which were recently built in Daegu since the 7th Educational Curriculum. In addition, this study analyses how outside noise affects inside environment of schools. This study found that the noise level criteria of school facilities(such as exterior learning sites and outer walls of school buildings) adjacent to street of one side satisfiedly corresponded to the level and criteria, 65dB(A), of school health law. However, the noise level and vibration criteria of school facilities adjacent to street of two sides did not satisfiedly corresponded to the level or criteria, 65dB(A). In case of classrooms, the inner noise of educational facilities with windows closed and also close to both the street of one side and of two sides satisfiedly corresponded to the level or criteria. 55dB(A), of school health law. In spring and tall, the windows are more open them usual for ventilation, and leaving windows open can lead to noise from outside. Thus, it is urgent to prepare for this situation.

생체의 온도 측정을 위한 수정된 마이크로파 라디오-써모미터

김태우,조태경,박병수,Kim Tae-Woo,Cho Tae-Kyung,Park Byoung-Soo 대한전자공학회 2005 電子工學會論文誌-SC (System and control) Vol.42 No.2

This paper presents a modified microwave radio-thermometer (MRTM) with material characteristic estimator and multiple temperature conversion tables to measure subcutaneous temperature of a living body This estimator provides a temperature retrieval unit with the data of material characteristics such as permittivity, conductivity, thickness and geometry of the living body. The temperature retrieval unit with multiple temperature conversion tables can select one of the tables and computes temperature value corresponding to measured radiation power. In the experiments, it was shown that the MRTM could reduce measurement errors of about $0.82^{\circ}C\;to\;7.68^{\circ}C$ for the cases of distilled water and mixed liquid at the temperature of $37^{\circ}C$. 본 논문은 생체의 내부 온도를 측정하기 위해서 매질 특성 추정기와 다중 온도 변환표를 갖는 수정된 마이크로파 라디오-써모미터(modified microwave radio-thermometer, MRTM)를 제안한다. 매질 특성 추정기는 생체의 유전을, 도전을, 두께, 형태와 같은 매질의 특성에 대한 데이터를 온도 검색 장치에 전달한다. 다중 온도 변환표를 갖는 온도 검색 장치는 이 변환표들 중 하나를 선택하여 측정된 방사 전력에 해당하는 온도값을 계산한다. 실험에서 MRTM은 $37^{\circ}C$의 온도에서 증류수와 혼합 용액에 대해서 $0.82\~7.68^{\circ}C$까지의 측정 오차를 줄일 수 있었다.

고정밀 고속 하이브리드 온 칩 온도센서

김태우,윤진국,우기찬,황선광,양병도,Kim, Tae-Woo,Yun, Jin-Guk,Woo, Ki-Chan,Hwang, Seon-Kwang,Yang, Byung-Do 한국정보통신학회 2016 한국정보통신학회논문지 Vol.20 No.9

본 논문에서는 고정밀 하이브리드 온 칩 온도센서를 제안하였다. 제안된 온도센서에서는 SAR 타입 온도센서와 ${\Sigma}{\Delta}$타입 온도센서를 혼합하였다. SAR 타입 온도센서는 ${\Sigma}{\Delta}$타입 온도센서 보다 온도를 찾아가는 속도가 빠르지만 오차가 발생할 확률이 높은 단점이 있고, ${\Sigma}{\Delta}$ 타입 온도센서는 SAR 타입 온도센서 보다 정확하지만 속도가 느린 단점이 있다. 제안된 온도 센서는 두개의 온도 측정방법을 혼합하여 고정밀 고속 온도측정이 가능하다. 또한, 칩 제작 후 온도 오차 값을 메모리회로에 저장하여 온도 오차를 보상하는 회로를 포함하여 온도센서를 구현하였다. 제안된 온도센서는 $0.35{\mu}m$ CMOS 공정으로 제작되었다. 온도 정확도, 소비 전력, 칩 면적은 각각 $0.15^{\circ}C$, $540{\mu}W$, $1.2mm^2$였다. This paper presents a high accuracy and fast hybrid on-chip temperature sensor. The proposed temperature sensor combines a SAR type temperature sensor with a ${\Sigma}{\Delta}$ type temperature sensor. The SAR type temperature sensor has fast temperature searching time but it has more error than the ${\Sigma}{\Delta}$ type temperature sensor. The ${\Sigma}{\Delta}$ type temperature sensor is accurate but it is slower than the SAR type temperature sensor. The proposed temperature sensor uses both the SAR and ${\Sigma}{\Delta}$ type temperature sensors, so that the proposed temperature sensor has high accuracy and fast temperature searching. Also, the proposed temperature sensor includes a temperature error compensating circuit by storing the temperature errors in a memory circuit after chip fabrication. The proposed temperature sensor was fabricated in 3.3V CMOS $0.35{\mu}m$ process. Its temperature resolution, power consumption, and area are $0.15^{\circ}C$, $540{\mu}W$, and $1.2mm^2$, respectively.

학교 건축물 전력소비의 기온감응도에 관한 연구

김태우,이강국,김호순,홍원화,Kim, Tae-Woo,Lee, Kang-Guk,Kim, Ho-Soon,Hong, Won-Hwa 한국교육시설학회 2011 敎育施設 Vol.18 No.5

In case of school buildings, energy consumption has been noticeably on the increase, along with the changes in outdoor temperature triggered by the improvement in national economic development and educational environments. Research on the characteristics of energy consumption in school buildings influenced by the changes in outdoor temperature is considered very significant in social aspects in that it will be fundamental to the suggestion of the alternatives, such as saving energy consumption in construction buildings and control of emitting carbon dioxide. In this regard, this study examined sensitivity to temperature of power consumption in school buildings, based on the changes of outdoor temperature for the past five years in the target buildings of elementary, middle and high schools and the amount of energy consumption. From the results, it has been believed that this study was very significant in terms of figuring out a quantitative, optimum level of energy consumption, maintenance of pleasant environments and functions, and the necessity of effective energy use and management in school buildings.

열간 압연용 고속도강 롤의 고온 특성

김태우,최진원,김동규 ( Tae Woo Kim,Jin Won Choi,Dong Gyu Kim ) 한국주조공학회 1996 한국주조공학회지 Vol.16 No.2

N/A High temperature properties such as hot hardness and thermal fatigue resistance of high speed steel roll of hot finishing mill have been investigated. Two kinds of roll having compositions, Fe-1.75%C-5.9%Cr-1.74%Mo-4.94%V-2.03%W(A specimen) and Fe-2.27%C-8.86%Cr-2.91%Mo-3.92%V-1.86%W(B specimen)were prepared for investigating the microstructure and crack propagation mode. A specimen has greater amounts of M_7C₃type carbides and less amounts of MC type carbides in comparison with B specimen. Hot hardness showed sudden decrease over 400℃, resulting in the hardness decrease of 50% at the temperature of 600℃, and showed little variation with time at 500℃ and 800℃. Thermal crack was developed at 550℃ in A specimen and 600℃ in B specimen.

장중복증의 임상적 고찰

김태우,정풍만,Kim, Tae-Woo,Jung, Poong-Man 대한소아외과학회 2004 소아외과 Vol.10 No.1

Intestinal duplication is a rare congenital anomaly. The diagnostic approach is difficult because of the differences in its location and clinical presentation. To evaluate the diagnostic as well as the therapeutic approaches in children, the medical records of 20 patients with intestinal duplications which had been operated upon from July 1980 to October 2002 were analyzed, retrospectively. The range of age was from 1 day to 11 years. The variables, such as age, sex, clinical presentation, diagnostic method, localization, anatomic type, treatment, complication, and combined anomalies were analyzed. Most of the cases were presented as incidental finding. The majority of the duplications except hindgut were cystic type. Treatment included segmental intestinal resection, excision of the lesion without intestinal resection, and septotomy. Seventy-five percent of the patients were detected before 1 year of age. The anatomic type of the lesion was closely related with its location. The cases of hindgut were almost always tubular type except 1 case. Clinical presentation was related to age, location, and anatomic type. There were no specific diagnostic methods. Perfect localization and application of appropriate operation are the most important requirements for successful treatment.

신생 여아에서 처녀막의 해부학적 구조와 외성기에 발생하는 기형

김태우,이남혁,김상윤,Kim, Tae-Woo,Lee, Nam-Hyuk,Kim, Sang-Youn 대한소아외과학회 1997 소아외과 Vol.3 No.2

The anatomical variations of the external genitalia including the hymen were observed prospectively in 1,500 female infants born between March, 1992 and July, 1992 at the Taegu Fatima Hospital. Careful inspection of the external genitalia was done within 24 hours after birth, and abnormal findings photographed. Almost all hymenal tissue appeared to be redundant. The hymen was annulus in 89.1 % of patients. Ninteen point nine percent had a central orifice and the remainder a ventral orifice. External ridges, intravaginal ridges, and clefts were present in 71.5 %, 50.7 % and 40.5 %, respectively. Congenital anomalies of the external genitalia were found in 20 patients(1.4 %). There were sixteen cases of hymenal cysts, two hymenal polyps, one imperforate hymen, and one Skene's duct cyst. Seven of the 16 hymenal cysts with stalks were excised and those without stalk were aspirated. Hymenal polyps were excised. Imperforate hymen was incised and drained, and Skene's duct cyst was aspirated successfully. The surgical procedure were done without anesthesia, and the results have been good. In conclusion, routine physical examination of the female newborn infant detects frequent developmental anomalies. The significance of those anomalies will be clarified after longitudinal long-term followup studies.

MR영상의 3차원 가시화 및 분석을 위한 뇌영역의 자동 분할

김태우,Kim, Tae-Woo 한국정보처리학회 2000 정보처리논문지 Vol.7 No.2

본 논문에서는 MR 영상의 3차원 가시화 및 분석을 위한 단일 채널 MR 영상의 자동 뇌영역 분할 방법을 제안한다. 이 방법은 4단계의 2차원 및 3차원 처리에 의하여 뇌윤곽을 찾아낸다. 1,2단계에서는 곡선 적합을 이용한 자동 문턱치화에 의하여 머리마스크와 초기 뇌마스크를 생성한다. 3단계에서 입방보간으로 초기 뇌마스크의 3차원 볼륨을 생성하여 형태학적 연산, 연결부위 레이블링에 의하여 중기 뇌마스크를 생성한다. 최종적으로 곡선 적합에 의한 자동 문턱치화를 이용하여 뇌마스크를 정련한다. 제안한 알고리즘은 영상의 슬라이스 방향을 고려할 필요가 없고 영상이 뇌 전체를 포함하지 않아도 되며, T1, T2, PD, SPGR등 다양한 종류의 MR 영상의 자동적인 뇌영역의 분할에 유용하다. 실험에서 20세트 MR 영상에 대하여 수동분할을 기준으로 0.97 이상의 유지도를 보였다. In this paper, a novel technique is presented for automatic brain region segmentation in single channel MR image data sets for 3D visualization and analysis. The method detects brain contours in 2D and 3D processing of four steps. The first and the second make a head mask and an initial brain mask by automatic thresholding using a curve fitting technique. The stage 3 reconstructs 3D volume of the initial brain mask by cubic interpolation and generates an intermediate brain mask using morphological operation and labeling of connected components. In the final step, the brain mask is refined by automatic thresholding using curve fitting. This algorithm is useful for fully automatic brain region segmentation of T1-weighted, T2-weighted, PD-weighted, SPGR MRI data sets without considering slice direction and covering a whole volume of a brain. In the experiments, the algorithm was applied to 20 sets of MR images and showed over 0.97 in comparison with manual drawing in similarity index.

재생불량성(再生不良性) 빈혈(貧血)의 약침치료(藥針治療) 경과 1례 보고

김태우,강영화,김효은,Kim, Tae-Woo,Kang, Young-Hwa,Kim, Heo-Eun 대한약침학회 2001 Journal of pharmacopuncture Vol.4 No.3

Objective : In order to report the process of treatment of Aplastic anemia by herbal acupuncture Methods: This case was diagnosed as deficiency of Yang of spleen and kidneys, deficiency of Ki and blood, and fevescence from the deficiency of Urn. Hominis Placenta herbal acupuncture and Bee-venom acupuncture were choosen as the method to treat the case. Results: 1. The nocturnal fevescence and indigestion was decreased during the times when Hominis Placenta herbal acupuncture was used once a day. 2. The mobility of the joints was improved and the inflamation on the joints was decreased during the times when Bee-venom acupuncture was used every other day. 3. The interval between the transfusion was extended during the times when Hominis Placenta herbal acupuncture and Bee-venom acupuncture were used by turns. Conclution : Hominis Placenta herbal acupuncture and Bee-venom acupuncture sucessfully imporved the symtoms of patient with Aplastic anemia

Web 2.0 기반 국가기준점 어플리케이션 설계

김태우,김정욱,서용철,Kim, Tae-Woo,Kim, Jyung-Wuk,Suh, Yong-Cheol 한국공간정보시스템학회 2009 한국공간정보시스템학회 논문지 Vol.11 No.3

삼각점, 수준점 등 국내에서 위치를 결정하는데 기본이 되는 모든 기준점은 공간정보의 기준이자 기반이 되기 때문에, 합리적이고 효율적이며, 지속적으로 관리되어야 한다. 한편 IT 및 통신기술이 발달함에 따라 공간정보를 다루는 모든 기술이 함께 발전하고 있으며, 모바일 디바이스의 대중화와 웹 2.0 환경이 구축됨에 따라 기준점의 관리를 실시간으로 가능케 하는 기술이 요구되고 있다. 이는 사용자의 편의를 보장하고 과학적이며 체계적인 기준점 관리를 도모한다. 본 연구에서는 웹 2.0 환경 하에서 Ajax 기반의 웹 어플리케이션을 설계하여 실시간으로 갱신되는 기준점 정보의 원활한 소통을 지원하고, 영상정보를 함께 제공함으로써 사용자 접근성을 강화하는 기술을 개발하였다. As a surveying standard of a nation, the Korean geodetic control points such as triangulation points and benchmarks require continuous and effective management toward a spatially enabled society. As the developments of information technologies, use of mobile devices like PDA (personal digital assistant) has been increasing and the Web 2.0 environment became an important part of GIS. In this context, the management systems for national geodetic control points should be upgraded in accordance with the current trend, particularly for more interactive user-interface on the Web 2.0. This paper describes the framework design and prototype implementation of a Web 2.0 GIS application for the management of Korean geodetic control points. Our system enables a real-time update of the control point information and provides aerial photos on vector maps using Ajax(Asynchronous JavaScript and XML) techniques.