RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        Radiation Characteristics of Dielectric-Coated Conducting Cylinder Loaded with Periodic Corrugation

        김중표,손현,Kim, Joong-Pyo,Son, Hyon The Korean Institute of Electromagnetic Engineerin 2000 한국전자파학회논문지 Vol.11 No.3

        주기적인 구형격자를 갖는 유전체 코팅된 도체 실린더에 대해 무한 주기 구조와 유한 주기 구조에 대한 누설 파 안테나의 복사 특성을 이론적으로 해석하였다. 무한 주기 구조에 대하여는 모드 정합 법을 적용하여 해석하 였고, 유한 주기 구조에 대하여는 퓨리에 변환과 모드 전개를 사용하여 적분 방정식을 유도하고 선형 연립 방정 식을 얻는다. 구형격자의 폭, 깊이, 유전체 코팅두께, 도체 실린더의 반경, 유한 구형격자 개수의 영향이 위상 상 수, 누설 상수 및 복사패턴 등과 복사 특성에 미치는 영향을 조사하였고, 유한 주기 구조와 무한 주기 구조의 결 과를 비교하고 잘 일치함을 확인할 수 있었다. 균일 유한 주기 구형격자에 의한 높은 측엽을 줄이기 위해 안테나 의 전후단 부에 테이퍼링과 비균일 준주기 슬롯배열을 고려하였다. 또한 구형격자 표면파 안테나에 사용되는 구 형격자 주기. 폭, 깊이에 대해 테이퍼링을 통해 낮은 측엽을 갖는 endfire 복사패턴을 얻을 수 있었다. The radiation characteristics of leaky antenna from the dielectric-coated conducting cylinder with periodic corrugation are investigated theoretically for the infinite and finite periodic structures. For the infinite periodic structure, mode-matching method is applied. The integral equation is derived for the finite periodic structure by use of the Fourier transform and mode expansion and a simultaneous linear equation is obtained. The influences of the corrugation slot width, corrugation depth, dielectric thickness, cylinder radius, and finite corrugation number on the radiation characteristics (leakage constant, phase constant, and radiation pattern) are investigated. The results of the finite periodic corrugations are compared with those of the infinite extent structure and good agreement is found. To reduce high side lobe levels of the uniform finite periodic structure, tapering process on the beginning and end section of antenna and nonuniform quasi-period slot arrays are considered. Especially, for the corrugation period, width and depth used for a corrugated surface wave antenna, through the proper tapering process, end-fire radiation pattern with reduced side lobe levels is given.

      • 위성 구조물에 의한 S-대역 옴니 안테나 이득 영향 분석

        김중표,이선익,임원규,김상구,이상곤 한국항공우주학회 2015 한국항공우주학회 학술발표회 논문집 Vol.2015 No.11

        정지궤도위성이 지상국과의 전구 방향의 통신링크를 제공하도록 +/-Z 축에 대해 반구형 S-대역 옴니안테나가 장착된다. 인접 위성 구조물과 가시적 간섭을 최소화하며, S-대역 옴니 안테나를 지지하는 구조물의 구조적 안정도를 제공하는 위치에 2 개의 RHCP 및 LHCP 옴니 안테나를 배치한 후 위성 구조물에 의한 안테나 합성이득의 변화를 원격명령 주파수를 사용하여 계산하고 또한 축비의 변화도 함께 검토하였다. 이것을 토대로 전이궤도 및 긴급모드에서 99% 빔 커브리지를 제공하는 안테나의 합성 이득값을 얻었으며 얻어진 안테나 합성 이득값을 근거로 통신 링크버짓 해석시 사용될 안테나 이득값을 설정하여 링크버짓에 적용하였다. The two hemispherical S-band omni antennas are placed on the geostationary satellite to provide the omni-directional communication link with the ground station. On the location having the minimized FOV (Field of View) interference with the satellite structure as well as providing the mechanical stability on the supporting structure of the antenna, two RHCP/LHCP antennas were placed. For the telecommand frequency, the antenna composite gain due to the satellite structure were analyzed, also the axial ratio was reviewed. Based on thus analysis, the composite gain ensuring 99% beam coverage during the transfer and emergency mode was obtained. This result was used to define the antenna gain in the system link budget as a worst case.

      • KCI등재후보

        Combined Gain Analysis of L-band Transmit Antenna in COMS

        김중표,양군호,이상곤,Kim, Joong-Pyo,Yang, Koon-Ho,Lee, Sang-Kon Korea Society of Satellite Technology 2010 한국위성정보통신학회논문지 Vol.11 No.1

        통신해양기상위성(COMS)은 통신, 해양, 기상 탑재체를 장착하고 3개의 임무를 수행하는 복합 정지궤도 위성이다. COMS는 기상탑재체 MI와 해양 탑재체 GOCI가 관측 후 전송하는 원시 데이터를 지상국에 전송하고 지상국에서 처리된 기상 데이터를 최종 사용자국에 중계하는 기능을 갖는 기상해양자료송수신계(MODCS)가 있다. 여기서 시스템 관점에서 관측 데이터 SD 신호와 중계 신호를 전송하는 L-대역 송신 안테나는 MI 탑재체와 기상탑재체와 함께 COMS 위성의 지구패널에 장착시 안테나 합성 이득을 예측하도록 요구되어진다. 우선 주어진 요구 사항에 대해 L-대역 송신 안테나 설계 및 해석이 수행된다. 설계된 안테나를 지구패널에 장착 후 3가지 다른 해석 방법을 사용하여 합성이득 해석이 수행된다. 얻어진 안테나 이득들은 3가지 다른 해석 방법 사이에 매우 유사한 결과를 제공하는 것을 확인하였으며 최종적으로 0.5 dB 이하의 안테나 이득 열화가 추정되어진다. The COMS (Communication Ocean Meteorological Satellite) is a hybrid geostationary satellite including communication, ocean, and meteorological payloads. The COMS includes the MODCS (Meteorological and Ocean Data Communication Subsystem) which provides transmitting the raw data collected by meteorological payload called MI (Meteorological Imager) and ocean payload named GOCI (Geostationary Ocean Color Imager) to the ground station, and relaying the meteorological data processed on the ground to the end-user stations. Here, for the L-band transmit antenna transmitting SD (Sensor Data) signal and the processed signal, from the system point of view, it is required to estimate the combined antenna gain when the L-band transmit is placed with MI and GOCI payloads on the earth panel of COMS. First of all, the L-band transmit horn is designed and analyzed for the requirements given, and then after placing it on the earth panel, the combined gain analysis is performed using three different analysis methods. It's shown that the obtained gain patterns are very similar among three different analysis methods. Finally the antenna gain degradation of less than 0.5 dB is estimated.

      • 천리안위성 원격측정명령계 RF부 궤도운용시험 결과 분석

        김중표,임원규,최승운,유상범,이상곤,Kim, Jung-Pyo,Im, Won-Gyu,Choe, Seung-Un,Yu, Sang-Beom,Lee, Sang-Gon 한국천문학회 2012 天文學會報 Vol.37 No.2

        천리안 위성 원격측정명령계 RF부는 위성 장착 이후 발사 전까지 여러 단계의 위성체레벨 기능시험을 거치며 요구 성능을 만족하는지를 충분히 확인하였다. 위성 발사후부터 정상궤도 진입 후에 발사전 원격측정명령계 RF가 원하는 요구 기능 및 성능을 만족하고 있는지를 확인하는 궤도운용시험이 수행되었다. 본 논문은 원격측정명령계 RF부의 궤도운용시험 계획에 따라 수행하여 얻어진 시험 결과에 대한 분석에 대한 것이다. 먼저 발사 후 LEOP 동안 원격명령이 정상적으로 수신되고 수행되는지 확인하였다. 그 이후 원격명령이 언락되는 수신 파워 임계(Threshold) 입력 레벨 확인을 확인하였으며 원격측정 다운링크 주파수 변이가 요구범위에 있는지 확인하였으며, 수신신호 스펙트럼 측정을 통해 TM EIRP를 추정한 결과 링크 버짓 마진 대비 추가적인 마진이 있음을 확인하였으며 또한 TM 송신 신호 변조지수가 추정범위 안에 있는지를 확인하였다. 그리고 레인징 시험을 통해 수신기 및 레인징 기능이 정상적으로 동작하고 있음을 확인하였다. 이 궤도운용시험 결과는 후속 정지궤도복합위성 원격측정명령계 RF부 궤도운용시험을 위한 비교 자료로 활용될 것이다.

      • KCI등재후보

        정지궤도위성 X-대역 출력필터 멀티팩션 민감도 해석

        김중표,이선익,임원규,김상구,이상곤 한국위성정보통신학회 2015 한국위성정보통신학회논문지 Vol.10 No.3

        본 논문에서는 정지궤도위성 관측탑재체 고속 데이터 전송을 위한 X-대역 이중모드 원통형 고전력 전송 출력필터의 비행모델 개발이전에 개발 모델을 설계하고 해석적 멀티팩션 요구마진을 보장하기 위해 해석되어졌다. 먼저 멀티팩션에 가장 민감한 슬롯 아이리스의 폭 및 두께를 가변하면서 멀티팩션 발생 임계전력의 민감도를 분석하였으며 그것을 토대로 선정된 아이리스 폭 및 두께에 대한주파수 대역에 따른 멀티팩션 임계전력을 분석하였으며 대역 내에서 해석적 요구 8 dB 마진을 가짐을 확인하였다. 또한 멀티팩션과함께 고출력 소자에 중요한 코로나 발생 임계전력 분석을 아이리스 폭 및 두께의 영향을 제시하였다. 마지막으로 제작된 개발모델을시험한 결과 주요 요구사항을 만족함을 확인하였다. In this paper, prior to the flight model X-band dual-mode circular cavity filter required for the high power transmission of the observation payload in the geostationary satellite, the development model are designed and analyzed to show the analytical multipactor requirement margin. First of all, the multipaction breakdown power sensitivities were analyzed by changing the iris width and thickness within the filter, and through that the iris width and thickness was selected and then the multipaction threshold powers over the frequencies within the bandwidth were analyzed and the required margin of 8 dB was obtained. Also for the high power transmission filter, another important phenomena known as corona breakdown are analyzed for the iris width and thickness changes. Finally the development model manufactured was tested and the results met the key requirements.

      • KCI등재후보

        COMS L-대역 송신 안테나 합성 이득 해석

        김중표,양군호,이상곤 통신위성ㆍ우주산업연구회 2010 한국위성정보통신학회논문지 Vol.5 No.2

        통신해양기상위성(COMS)은 통신, 해양, 기상 탑재체를 장착하고 3개의 임무를 수행하는 복합 정지궤도 위성이다. COMS는 기상 탑재체 MI와 해양 탑재체 GOCI가 관측 후 전송하는 원시 데이터를 지상국에 전송하고 지상국에서 처리된 기상 데이터를 최종 사용자국에 중계하는 기능을 갖는 기상해양자료송수신계(MODCS)가 있다. 여기서 시스템 관점에서 관측 데이터 SD 신호와 중계 신호를 전송하는 L-대역 송신 안테나는 MI 탑재체와 기상탑재체와 함께 COMS 위성의 지구패널에 장착시 안테나 합성 이득을 예측하도록 요구되어진다. 우선 주어진 요구 사항에 대해 L-대역 송신 안테나 설계 및 해석이 수행된다. 설계된 안테나를 지구패널에 장착 후 3가지 다른 해석 방법을 사용하여 합성이득 해석이 수행된다. 얻어진 안테나 이득들은 3가지 다른 해석 방법 사이에 매우 유사한 결과를 제공하는 것을 확인하였으며 최종적으로 0.5 dB 이하의 안테나 이득 열화가 추정되어진다.

      • KCI등재

        하이브리드 MOM/UTD 방법을 이용한 주름진 표면파 안테나의 해석

        김중표,이창원,손현,Kim, Joong-Pyo,Lee, Chang-Won,Son, Hyon 한국전자파학회 1999 한국전자파학회논문지 Vol.10 No.3

        평행평판 도파관으로부터 급전되어지는 주름진 도체판을 가지는 표면파 안테나의 해석이 고려되어진다. 해석의 단순함을 위해 원래의 문제를 3개의 영역, 즉 단락된 평행평판 도파관 내부 구조(내부 영역 1)와 주름진 격자 내부의 구조(내부 영역 2)와 도체 쇄기의 구조(외부 영역)로 나누기 위해 등가원리가 도입된다. End-fire 복사를 하는 주름진 표면과 안테나를 해석하기 위하여 하이브리드 MOM/UTD 방법이 적용되어진다. 수치해석 결과들은 이전의 실험결과들과 매우 잘 일치하며, 이전의 단순 등가전류 접근의 결과들과 비교할 때 더 나은 결과들이 얻어진다. 또한 효과적인 end-fire 주름진 표면파 안테나 설계를 위한 인자들을 얻을 수 있다. The analysis of a surface wave antenna with the corrugated ground plane fed by a parallel-plate waveguide is considered. An equivalent theorem Is employed to subdivide the original problem into three regions for the simple analysis : one concerning the geometry inside the shorted parallel-plate(Internal region 1), one concerning the geometry of the corrugation(Internal region 2), and one concerning the geometry of the conducting wedge(External region). The hybrid method of moment(MOM)/uniform geometrical theory of diffraction(UTD) method is applied to analyze a corrugated surface wave antenna with the end-fire radiation. Our numerical results are very well matched with those of the previous experiment, better results are obtained when compared with those of the previous simple equivalent current approach. Also, we can obtain the parameters to design an effective end-fire corrugated surface wave antenna.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼