http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종욱,박충효,임정훈,정성수,김명호,박태곤,Kim, Jong-Wook,Park, Choong-Hyo,Lim, Jung-Hoon,Jeong, Seong-Su,Kim, Myong-Ho,Park, Tae-Gone 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.9
A novel design of a simple square-frame USM (ultrasonic motor) was proposed. The stator of the motor consists of a square-frame shape elastic body and four rectangular plate ceramics. The four ceramics were attached to inner surfaces of the square frame elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90 degree phase difference voltage were applied to the ceramics on vertical surfaces. To find a model that generates elliptical motion at outside of the stator, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As result, the model EL10EH3ET0.5CL4 which generates the maximum elliptical displacement was chosen by analyzing the resonance mode according to changes in frequency.
기성 지대주와 맞춤형 CAD-CAM 지대주의 적합 및 나사 안정성 비교
김종욱,허유리,김희중,정재헌,Kim, Jong-Wook,Heo, Yu-Ri,Kim, Hee-Jung,Chung, Chae-Heon 대한치과보철학회 2013 대한치과보철학회지 Vol.51 No.4
연구 목적: 본 연구에서는 기성 지대주와 맞춤형CAD-CAM 지대주의 적합성 및 나사 사이의 안정성 대해 알아보고자 한다. 연구 재료 및 방법: 오스템 임플란트 시스템을 이용하였다. 동일회사에서 제작된 기성 지대주(Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea) 및 맞춤형CAD-CAM 지대주(CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea)와 국내 외주 제작된 맞춤형CAD-CAM 지대주(Myplant, Raphabio Co., Seoul, Korea)를 5개씩 선택, 제작하였으며 나사는 각 회사에서 제공되는 것을 사용하였다. 제조사의 지시에 따라 고정체와 지대주를 30 Ncm으로 조인 후 초기 풀림 토크를 3회 반복 측정한 후 통계 분석하였다(${\alpha}=.05$). 고정체-지대주 연결체를 에폭시 레진에 매몰 후 습식 절삭 및 연마하여 계면 사이의 적합성을 FE-SEM으로 관찰하였다. 결과: 지대주의 초기 풀림 토크 값은 각각 기성 지대주(Transfer abutment)에서 $26.0{\pm}0.30Ncm$, 동일 회사에서 제작된 맞춤형CAD-CAM 지대주(CustomFit abutment)에서 $26.3{\pm}0.32Ncm$, 외주로 제작된 맞춤형CAD-CAM 지대주(Myplant abutment)에서 $24.7{\pm}0.67Ncm$였다. 국내 외주 제작된 맞춤형CAD-CAM 지대주에서 유의적으로 낮은 초기 풀림 토크 값을 보였으며(P=.027), 고정체-지대주 계면에서 변연 간극이 관찰되었다. 결론: 본 실험의 한계 내에서 국내 외주 제작된 맞춤형CAD-CAM 지대주는 동일 회사에서 제작된 기성 지대주나 맞춤형CAD-CAM 지대주에 비해 더 낮은 나사 안정성 및 적합성을 보인다고 볼 수 있다. Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.
김종욱 ( Jong Wook Kim ),김희중 ( Hee Jung Kim ),정재헌 ( Chae Heon Chung ) 조선대학교 치의학연구원 2014 Oral Biology Research (Oral Biol Res) Vol.38 No.2
Conventional heat-cured acrylic resins (polymethyl methacrylate) are the most predominantly used denture base materials, but these materials are typically low in strength. Until now, fracture of acrylic resin dentures remains an unresolved problem in prosthodontics. To prevent clinical fractures, glass fiber has been used to reinforce acrylic resin dentures. Glass fiber frameworks are easy to handle and chemically bond to all methacrylate resins, and the presence of glass fiber reinforcement improves fracture resistance and flexibility of complete dentures.
일축 압축에 의한 시료 파괴 시 수반되는 미소 전위에 대한 기초 연구
김종욱 ( Jong Wook Kim ),박삼규 ( Sam Gyu Park ),송영수 ( Young Soo Song ),성낙훈 ( Nak Hun Sung ),김정호 ( Jung Ho Kim ),조성준 ( Seong Jun Cho ) 한국지구물리탐사학회 2007 지구물리와 물리탐사 Vol.10 No.3
자연전위 측정에 의한 산사태나 사면 안정성 모니터링의 기본 연구로 일축 압축에 의한 암석의 파괴 시 수반되는 미소 전위를 측정하였다. 측정시스템은 24 bit의 분해능을 가지며 동시에 8채널 측정이 가능한 A/D 변환기와 일축 압축 시험기, 일축 압축 시 암석의 변형률 측정 장치, 4조의 전위 전극으로 구성된다. 구축된 시스템을 이용하여 화강암, 석회암, 사암의 암석시료와 균질한 시료 상태에서 미소 전위 발생을 모니터링하기 위해 제작한 모르타르 시료에 대하여 실험하였다. 포화된 암석 시료에서는 압력이 가해짐에 따라 모든 시료에서 미소 전위의 발생이 관측되었으며, 하중이 증가함에 따라 발생되는 전위의 세기가 증가하는 것을 확인하였다. 발생 전위의 세기는 사암, 석회암, 화강암의 순으로 크게 나타났는데, 이는 공극률과 비례관계가 있음을 알 수 있었고, 전기동역학적인 관점에서 발생 메커니즘을 설명할 수 있다. 반면, 건조 시료에서는 사암에서만 전위 발생이 관측되었는데 이는 사암에 석영 함량이 많아 발생한 압전 전위에 의한 것으로 이론을 통해 알 수 있었다. 시료에 부착된 4조의 전위전극에서의 측정된 전위세기를 비교한 결과 파괴면에 인접한 전극에서의 전위세기가 다른 전극에 비해 크게 나타나는 것을 확인했다. 이는 다채널 SP 모니터링을 통해 산사태나사면 붕괴 지점을 미리 예측할 수 있는 긍정적인 결과로서 향후 음향방사(acoustic emission)와 동시에 측정하여 정확한 파괴면과 미소 전위세기와의 정량적 상관관계를 규명할 예정이다. As a part of basic studies on monitoring of landslides and slope stability using SP measurements, micro-electric potentials of rock samples were measured accompanied with the rock failure by a uniaxial loading test were measured. The measurement system consists of a 8 channel A/D converter with 24 bit resolution, uniaxial loading tester, strain gages and 4 sets of electrode attached to a rock sample. Rock samples of granite, limestone, and sandstone were tested. Also, mortar samples were tested in order to monitor electric-potentials of a uniform sample. Micro-electric potentials were detected in all saturated samples and the strength of them increased as the loading force increased. Sandstone samples showed the largest strength of micro-electric potential and it followed limestone and granite samples, which indicates a positive relationship with porosity of rocks. The mechanism generating these micro-electric potential can be explained in terms of electro-kinetics. In case of dry samples, micro-electric potential could be observed only in sandstone samples, where piezoelectric effect played main role due to high contents of quartz in sandstone samples. We found that biggest micro-electric potentials were observed at the electrodes near the crack surface of rock samples. This is very encouraging result that SP monitoring can be applied to predicting landsliding or to estimate collapsing position combining with monitoring of acoustic emissions.
강릉 심곡 해안에 발달한 타포니의 물리·화학적 특성에 기초한 풍화 진행 양상
김유정 ( Kim Yu Jung ),김종연 ( Kim Jong Yeon ),김종욱 ( Kim Jong Wook ),한민 ( Han Min ) 한국지형학회 2018 한국지형학회지 Vol.25 No.3
In this study, we surveyed weathering progressing aspect by major elements variation and rock hardness by using XRF analysis, schmidt hammer, and thin section analysis. This observation suggested that the weathering process is likely to develop differently according to microstructural characteristics. R-value on the inside wall are lower than those on the outside. Also, the shadier the environment was, the closer it was to inshore areas, the R-value appeared to be lower. The movement of the elements such as Ca, Na and K shows that feldspar is hydrolyzed and can form salt crystallization like a gypsum or halite when they combine with the elements such as S or Cl. It proved a high CaO, Na<sub>2</sub>O and K<sub>2</sub>O content on flaking inside wall and rock meal. The exfoliation was mainly observed along the shady backwall and ceiling of tafoni. This helped in predicting the growth of tafoni as well as the direction of its progress.