레이저 표면 용융공정으로 Al-Cr 코팅한 Zr합금의 미세조직 특성

김정민,이재철,김일현,김현길,Kim, Jeong-Min,Lee, Jae-Cheol,Kim, Il-Hyun,Kim, Hyun-Gil 한국재료학회 2017 한국재료학회지 Vol.27 No.10

In this study, the coating of an Al-Cr layer on the surface of a Zircaloy-4 alloy was carried out through plasma pretreatment coating and a laser surface melting process. Two different conditions for laser treatment, severe or minimal surface melting of the Zr alloy substrate, were applied to form the final coating. When there was significant surface melting of the Zr alloy, the solidification microstructure of the newly formed coating layer was mainly composed of needle-shaped $Al_3Zr$, Al(Cr) and $Al_7Cr$ phases. On the other hand, the solidification microstructure of the coating layer was mainly composed of Al(Cr) and $Al_7Cr$ phases when there was minimal surface melting of Zr base in the laser process. However, when the coating was maintained at $1100^{\circ}C$ for 2 hours, significant inter-diffusion occurred between the phases in the coating. As a result, the upper part of the coating layer was observed to mainly consist of $Al_3Zr$ and $Al_8Cr_5$ phases, regardless of the laser treatment conditions.

고온 코팅용 Cr-Al합금의 미세조직 및 특성에 미치는 Si 첨가의 영향

김정민,김일현,김현길,Kim, Jeong-Min,Kim, Il-Hyun,Kim, Hyun-Gil 한국재료학회 2019 한국재료학회지 Vol.29 No.1

Cr-Al alloys are attracting attention as oxidation resistant coating materials for high temperature metallic materials due to their excellent high temperature stability. However, the mechanical properties and oxidation resistance of Cr-Al alloys can be further enhanced, and such attempts are made in this study. To improve the properties of Cr-Al alloys, Si is added up to 5 wt%. Casting specimens with different amounts of Si content are prepared by a vacuum arc remelting method and isothermally heated under steam conditions at $1,100^{\circ}C$ for 1 hour. The as-cast microstructure of low Si alloys is mainly composed of only a Cr phase, while $Al_8Cr_5$ and $Cr_3Si$ phases are also observed in the 5 % Si alloy. In the high Si alloy, only Cr and $Cr_3Si$ phases remain after the isothermal heating at $1,100^{\circ}C$. It is found that Si additions slightly decrease the oxidation resistance of the Cr-Al alloy. However, the microhardness of the Cr-Al alloy is observed to increase with an increasing Si content.

타워크레인 설치 및 해체

김정민,Kim, Jeong-Min 한국건설안전협회 1995 建設 安全技術 Vol.17 No.-

측두하악장애를 가진 성인여성에 있어 중절치부 최대교합력 유지양상

김정민,신금백,Kim, Chung Min,Shin, Geum Baek 대한안면통증구강내과학회 1987 Journal of Oral Medicine and Pain Vol.12 No.1

In order to evaluate the effect of signs and symptoms of temporomandibular disorders on the bite force of anterior teeth, the author estimated a feature of maintaining the maximum bite force on central incisors in Korean 34 adult females with signs and symptoms of temporomandibular disorders (TMD group) and in Korean 31 adult females within normal masticatory function far from any sign or symptom of TMD (control group), and analyzed the data statistically. The obtained results were as follows: 1. There was not a significant difference of the maximum bite force on central incisors between TMD group and control group (P>0.05). 2. The duration of maintaining the maximum bite force on central incisors in TMD group was shorter than it in control group (P<0.01).

커뮤니티 검출기법을 이용한 소프트웨어 아키텍쳐 모듈 뷰 복원

김정민,이찬근,Kim, Jungmin,Lee, Changun 한국정보과학회 소프트웨어공학 소사이어티 2012 소프트웨어공학회지 Vol.25 No.4

본 논문은 소프트웨어 클러스터링 기법과 커뮤니티 검출 기법의 비교를 통하여 아키텍쳐 모듈 복원 프로세스에 커뮤니티 검출 알고리즘의 적용가능성을 제시한다. 또한, 대표적인 클러스터링 알고리즘과 커뮤니티 검출 알고리즘의 값과 나눠진 모듈간의 상관관계와 차이점을 분석한다. 이를 통하여 커뮤니티 검출 알고리즘이 소프트웨어 아키텍쳐 모듈 뷰 복원에 활용되어질 수 있다는 몇 가지 근거를 제시하였고, 기존의 클러스터링 결과와 커뮤니티 알고리즘의 결과치를 비교함으로써, 서로의 결과 데이터가 어떠한 연관성을 가지는지 제시하였다. This article suggests applicability to community detection algorithm from module recovering process of software architecture through compare to software clustering metric and community dectection metric. in addition to, analyze mutual relation and difference between separated module and measurement value of typical clustering algorithms and community detection algorithms. and then only sugeested several kinds basis that community detection algorithm can use to recovering module view of software architecture and, by so comparing measurement value of existing clustering metric and community algorithms, this article suggested correlation of two result data.

AHP를 이용한 건축건설공사 공종별 위험도 분석

김정민,이종빈,장성록,Kim, Jeongmin,Lee, Jong-Bin,Chang, Seong Rok 한국안전학회 2017 한국안전학회지 Vol.32 No.5

The highest fatal accident ratio was recorded in the construction industry. According to the industrial insurance premium rate & business type example, among the construction industry, the architectural work has the highest fatal and loss time accident ratio. Previous literature has investigated various aspects of accident occurrence and prevention in architectural work. However, those studied were limited in that they only focused on the fatal accident without considering the loss time accident. But non fatal accidents were recorded more than 50 times of fatal accidents. Therefore non fatal accidents must be controlled to lessen industrial accidents. Based on this, the goal of this study was to investigate the nature of the loss time accident and derive the risk index of work type in architectural work. In this study, opinions of safety experts were gathered and the risk index of work type was derived using AHP(Analytic Hierarchy Process). And verification was accomplished by comparing the results of this study with the risk index derived by analysis of accident records. Results showed that the risk index of work type was significantly higher in steel frame work, temporary installation work, earth & foundation work, facilities work, concrete work. And statistical analysis for verification showed that coefficient of Pearson correlation was 0.686 and P-value was 0.001.

이슈&피플-제1회 <2007 윤이상 페스티벌>

김정민,Kim, Jeong-Min 대한출판문화협회 2007 출판저널 Vol.382 No.-

외모에 대한 사회문화적 요인, 신체질량지수 및 자아존중감이 신체상에 미치는 영향 - 발달단계별 차이를 중심으로 -

김정민,이세진,Kim, Jung-Min,Yi, Se-Jin 한국가정관리학회 2009 가정과삶의질연구 Vol.27 No.6

The purpose of the study is to investigate developmental changes in the effect of sociocultural factors towards appearance, body mass index and self-esteem on body image. Participants were 315elementary school, 305middle school students, 310hight school students and 346college students from Seoul and Gyeonggi Province. Collected data were analyzed through Cronbach's $\alpha$, Two-way ANOVA, Pearson's correlation, and stepwise multiple regression. The findings of the study were as follows: 1) Sociocultural factors towards appearance, body mass index, self-esteem and body image differed by grade and gender. 2) Peers, self-esteem, BMI and mass media were significant predictors of elementary school students' body image. Mass media, BMI and self-esteem were significant predictors of middle school students' body image. Self-esteem, peers, BMI, gender and mass media were significant predictors of high school students' body image. Self-esteem, mass media and BMI were significant predictors of college students' body image.

일본뇌염바이러스의 Mutant M 단백질에 반응하는 다클론항체의 생산: 극성 아미노산 잔기의 바이러스 생산과정에서의 역할

김정민,윤상임,송병학,김진경,이영민,Kim, Jeong-Min,Yun, Sang-Im,Song, Byung-Hak,Kim, Jin-Kyoung,Lee, Young-Min 한국미생물학회 2010 미생물학회지 Vol.46 No.2

일본뇌염바이러스(Japanese encephalitis virus)는 모기 매개성 플라비바이러스에 속하며, 주로 동남아시아 지역에서 유행성 바이러스성 뇌염을 일으킨다. 일본뇌염바이러스는 외피를 가진 작은 바이러스로서, 양성가닥 RNA 게놈을 가지고 있다. 감염성을 띤 바이러스 입자는 capsid (C), membrane (M; prM 전구체로부터 생성), 및 envelope (E)과 같은 3개의 구조단백질로 이루어져 있다. 본 연구에서는 일본뇌염바이러스 생산과 정에 M 단백질의 N-말단부위에 위치한 극성 아미노산 잔기의 역할을 분석하였다. 일본뇌염바이러스의 infectious cDNA를 활용하여, M 단백질의 $E^9$와 $K^{15}K^{16}E^{17}$ 잔기를 알라닌으로 치환시킨 2개의 mutant cDNA (Mm1과 Mm2)를 각각 제작하였다. 각각의 cDNA로부터 합성된 mutant RNA를 세포에 트랜스펙션시킴으로써, 비록 세포 내에 축적된 3개의 구조단백질양은 변화가 없으나, 이들 세포로부터 생산된 바이러스의 양은 Mm2 RNA의 경우 ~1,000배 감소됨을 관찰하였다. 흥미롭게도, Mm2 RNA로부터 발현된 mutant M 단백질은 wild-type M 단백질을 인지하는 항혈청에는 반응하지 않았으나, mutant M 단백질을 항원으로 제작된 항혈청에는 반응하는 것을 알 수 있었다. 본 실험결과는 일본뇌염바이러스 M 단백질을 구성하는 3개의 극성 아미노산 잔기($K^{15}K^{16}E^{17}$)가 바이러스의 생산과정에 관여한다는 것을 암시한다. 앞으로, wild-type 또는 mutant M 단백질(Mm2)을 인식하는 2개의 항혈청은 이 단백질의 기능연구에 유용한 재료로 사용될 것으로 기대된다. Japanese encephalitis virus (JEV), a member of the mosquito-borne flaviviruses, causes epidemics of viral encephalitis in the Southeastern Asia. JEV is a small enveloped virus with a positive-sense RNA genome; the infectious virion consists of three structural proteins, namely capsid, membrane (M; a mature form of its prM precursor), and envelope proteins. Here, we investigated a role of the charged residues found at the N-terminus of the JEV M protein in virus production. Using an infectious JEV cDNA, we generated two mutant cDNAs, Mm1 and Mm2, by charged-to-alanine substitution for $E^9$ and $K^{15}K^{16}E^{17}$ residues of the M protein, respectively. By transfection of wild-type or each of the two mutant RNAs transcribed from the corresponding cDNAs, we found that Mm2, but not Mm1, had a ~3-log decrease in virus production, even though a comparable amount of all three structural proteins were produced in transfected cells. Interestingly, the prM protein expressed in Mm2 RNA-transfected cells was not recognized by the polyclonal antiserum raised against the N-terminal 44 amino acids of the wild type M protein, but reacted to the antiserum raised against the corresponding region of the mutant Mm2. Our results indicate that three charged residues ($K^{15}K^{16}E^{17}$) in JEV M protein play a role in virus production. Two polyclonal antisera specifically recognizing the wild-type or Mm2 version of the M protein would provide a useful reagent for the functional study of this protein in the virus life cycle.

디지털화상의 기본특성

김정민,Kim, Jeong-Min 대한디지털의료영상학회 2005 대한디지털의료영상학회논문지 Vol.7 No.1