http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이저에 의해 패터닝 된 바늘과 탄성중합체와의 마찰 효과
김재구(Jaegu Kim),노승국(Seungkook Ro),박종권(Jongkweon Park),조성학(Sunghak Cho),황경현(Kyunghyun Whang) 한국레이저가공학회 2012 한국레이저가공학회지 Vol.15 No.3
The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and 50 μm discrete line generated by 266 nm, 20 ns laser.
모바일 P2P 네트워크에서 피어의 연결성을 고려한 그룹 기반 캐시 공유 기법
김재구(Jaegu Kim),윤수용(Sooyong Yoon),임종태(Jongtae Lim),이석희(Seokhee Lee),복경수(Kyoungsoo Bok),유재수(Jaesoo Yoo) 한국콘텐츠학회 2014 한국콘텐츠학회논문지 Vol.14 No.10
모바일 P2P 네트워크에서 사용자 요청을 효과적으로 처리하기 위해 캐시 공유 기법들이 연구되고 있다. 본 논문에서는 모바일 P2P 네트워크에서 피어의 연결성에 기반을 둔 클러스터를 구축하여 캐시를 공유하는 기법을 제안한다. 제안하는 기법은 연결성이 오랫동안 유지될 수 있는 피어들을 하나의 클러스터로 구성하여 캐시를 공유한다. 클러스터 내부에 있는 피어들의 캐시를 하나로 사용함으로써 데이터의 중복을 감소시키고 캐시 공간을 효율적으로 사용한다. 또한, 캐시 공간을 데이터 캐시와 임시 캐시 두 부분으로 분할하여 사용한다. 임시 캐시를 활용하여 클러스터의 토폴로지가 변경되거나 캐시 데이터 교체 시, 지연시간을 감소시킬 수 있다. 일반적인 기법은 협력적 캐시 처리 절차를 통해 질의가 전달되지만 통신비용을 줄이기 위해 1-홉 피어 캐시확인과 클러스터 헤더로 가는 경로에 있는 피어의 캐시를 확인한다. 성능 평가결과 제안하는 기법이 기존 기법에 비해 캐시 적중률도 높고 지연시간을 감소시키는 것을 확인할 수 있었다. Recently, cache sharing methods have been studied in order to effectively reply to user requests in mobile P2P networks. In this paper, we propose a cache sharing scheme based on a cluster considering the peer connectivity in mobile P2P networks. The proposed scheme shares caches by making a cluster that consists of peers preserving the connectivity among them for a long time. The proposed scheme reduces data duplication to efficiently use the cache space in a cluster. The cache space is divided into two parts with a data cache and a temporary cache for a cache space. It is possible to reduce the delay time when the cluster topology is changed or the cache data is replaced utilizing a temporary cache. The proposed scheme checks the caches of peers in a route to a cluster header and the caches of one-hop peers in order to reduce the communication cost. It is shown through performance evaluation that the proposed scheme outperforms the existing schemes.
김재구(Jaegu Kim) 강원대학교 기초과학연구소 1986 기초과학연구 Vol.3 No.-
선형화된 최소 초중력이론의 구조를 기약 초장을 이용하여 분석했다. superspin 3 / 2의 기약 초장은 선형화된 Weyl 초중력을 기술함을 보였다. 이 Weyl 초중력을 보조장과 결합하여 선형화된 Poincare 초중력을 구했다. The structure of the minimal supergravity is analyzed at linear level by using irreducible superfields. It is shown that the irreducible superfield with superspin 3 / 2 describes the linearized Weyl supergravity. The linearized Poincar'e supergravity is obtained by coupling the Weyl supergravity with compensating superfield.
김재구(JaeGu Kim),구동식(DongSik Gu),최병근(ByeongKeun Choi) 한국소음진동공학회 2011 한국소음진동공학회 학술대회논문집 Vol.2011 No.4
The acoustic emission (AE) technique is a well-known non-destructive test technique, both in research and for industrial applications. It is mainly used to monitor the onset of cracking processes in materials and components. Predicting and preventing the crack phenomenon has attracted the attention of many researchers and has continued to provide a large incentive for the use of condition monitoring techniques to detect the earliest stages of cracks. In this research, goal is in grasping features of AE signal caused by crack growth. The envelope analysis with discrete wavelet transform (DWT) is used to find the characteristic of AE signal. To estimate feature of divided into three by crack length, the time waveform and the power spectrum were generated by the raw signals and the transferred signal processed by envelope analysis with DWT.