http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이중경로증폭 선형공진 고정이득 L-band EDFA에서 발진 파장 및 방향에 따른 과도응답 특성
김익상,Kim Ik-Sang 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.6A
본 논문에서는 고효율 증폭 기능을 가지는 이중경로증폭 구조의 고정이득 L-band EDFA를 구현하였다. 선형공진기로부터 생성된 발진광에 의해 신호채널들이 분기결합 되더라도 잔류채널의 요동을 줄일 수 있다. 잔류채널의 과도응답 특성에 대해 발진출력광 변화율이라는 정량적인 척도를 제시하였고 이를 이용해 발진파장 및 발진방향에 따른 과도응답 특성을 측정하였다. 결과적으로 단파장 및 펌프광의 반대 방향으로 전파하는 후방 발진광이 가장 양호한 것으로 판명되었다. We implemented DPU(Double-Pass Gain-Clamped) L-band EDFA for highly efficient amplification. A lasing signal generated within the linear cavity, can minimize the fluctuation of surviving channels when several WDM(Wavelength Division Multiplexing) channels are added or dropped. The new method measuring the characteristics of transient response of surviving channels quantitatively is suggested. It is to measure the ratio of lasing output before add or drop to that after add or drop. We investigated dynamic characteristics by using this method according to lasing wavelengths and propagation directions within the cavity. Experimental measurements show that the short lasing wavelength and backward propagation direction is the best condition for small fluctuation of surviving channels.
고정이득 L-band EDFA에서 발진 파장 및 방향에 따른 과도응답 특성
김익상,김창봉,양흥,손영호,Kim Ik sang,Kim Chang bong,Yang Heng,Sohn Young ho 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.3a
WDM(Wavelength Division Multiplexing) 광통신망의 노드에서 신호채널들이 분기 결합될 때 잔류채널들의 이득을 일정하게 제어해 주기 위해 고정이득 EDFA를 사용한다. 본 논문에서는 양방향 펌프에 의해 고이득을 가지는 L-band EDFA에서 발진광에 의해 입력변화를 보상해주는 방식으로 고정이득 EDFA를 구현하였다. 여기서 발진방향 및 파장에 따른 잔류채널의 과도응답 특성에 있어서 단파장 후방발진의 경우가 최적임을 확인할 수 있었다. The gain-clamped EDFA has been developed to eliminate the output power change of WDM surviving channels to occur with added or dropped channels, which degrades the performance of WDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the hi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the lasing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation due to the inhomogeneous broadening effect.
양방향 펌프구조 고정이득 L-band EDFA의 과도응답 특성
김익상,Kim, Ik-Sang 배재대학교 공학연구소 2004 공학논문집 Vol.5 No.1
WDM(Wavelength Division Multiplexing) 광통신망의 노드에서 신호채널들이 분기 결합될 때 잔류채널들의 이득을 일정하게 제어해 주기 위해 고정이득 EDFA를 사용한다. 본 논문에서는 양방향 펌프에 의해 고이득을 가지는 L-band EDFA에서 발진광에 의해 입력변화를 보상해주는 방식으로 고정이득 EDFA를 구현하였다. 여기서 발진방향 및 파장에 따른 잔류채널의 과도응답 특성에 있어서 단파장 후방발진의 경우가 최적임을 확인할 수 있었다. The gain-clamped EDFA has been developed to eliminate the output power change of WDM surviving channels to occur with added or dropped channels, which degrades the performance of EDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the bi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the alsing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation sue to the inhomogeneous broadening effect.
광전송 시스템에서의 어븀 첨가 광섬유 증폭기에 대한 분석
김익상,류황,Kim, Ik-Sang,Ryu, Whang 배재대학교 공학연구소 1997 공학논문집 Vol.2 No.1
EDFA는 광전송시스템에서 광섬유상에 전파되는 신호가 광섬유의 손실로 인해 약해지게 되는데 미약해진 신호의 광세기를 키워주는 증폭기로서 널리 사용되고 있다. EDFA의 증폭기작을 주요 인자를 가지고 분석함으로써 그 특성을 이해하고 이를 토대로 EDFA 설계시 유용한 기준으로 삼고자 한다. 또한 광전송시스템에서의 EDFA는 자연방출광잡음으로 인해 수신단에서 신호대잡음비를 악화시켜 전송오율을 증가시키게 되는데 이를 억제하기 위한 동작조건 즉 잡음지수의 최소화하는 동작조건에 대해서 논하고자 한다. EDFA (Erbium Doped Fiber Amplifier) is widely used to compensate the loss in fiber optic transmission system. The characteristics of EDFA are investigated by analyzing the mechanism amplifying the optical power of an input with several factors to obtain the criteria for designing EDFA. When it is used in fiber optic transmission system, signal to noise characteristics in the receiver is deteriorated due to the spontaneous emission noise of EDFA. We investigate the operating conditions of EDFA to reduce BER (Bit Error Rate).
김익상,류황,Kim, Ik-Sang,Ryu, Hwang 배재대학교 공학연구소 1998 공학논문집 Vol.3 No.1
저가의 파장 tuner로서 편광제어를 이용한 파장가변 고리형 광섬유레이저에 대한 분석 및 실험을 통하여 동작을 입증하였다. 이 고리형 레이저는 루프 중간에 편광기 및 편광제어기로 구성되어 있고 SOA를 이득매질로 사용하여 구현하였다. 편광제어기 및 편광기를 조절해서 파장가변을 시킬 수 있으며 1540~1560 nm의 가변 영역을 확인할 수 있었다. The low cost fiber ring laser can be tuned by controlling polarization states within the loop. In this paper, we investigate its operating principle and verify the performance through an experiment. This ring laser consists of a polarization controller and an intracavity polarizer for the wavelength tuner and semiconductor optical amplifier for the gain medium. It is seen that the lasing wavelength may be tuned through the range of 1540~1560 nm as a polarization controller and a polarizer are adjusted.