http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김은강,김용광,윤종원,김남진,박문수 국방기술품질원 2023 국방품질연구논집 Vol.5 No.2
This study investigates an optimal design for reducing the unexploded rate of submunitions released from a cluster bomb. We attempt to identify the main factors that cause the unexploded submunitions and find ways to solve them. First, an M&S analysis is performed to determine the cause of the unexploded submunitions, based on which a design for the body shape of a submunition applied with a method of protecting the fuse is implemented. In addition, we attempt to improve the operational performance of the submunition fuse with an improved shape. Through this process, a design is produced and simulated to prove its validity.
김은강(Kim, Eun-Kang),김성하(Kim, Seong-Ha),신혜선(Sin, Hye-Seon),김소연(Kim, So-Yeon),이범식(Lee, Bumshik) 한국방송·미디어공학회 2022 한국방송공학회 학술발표대회 논문집 Vol.2022 No.11
본 설계에서는 택배의 현재 상태를 확인 후 택배 상자의 파손 유무를 분류하고 사진으로 제공하는 기술을 제안하였다. 본 설계에서는 딥러닝 네트워크를 통해 훈련된 인공지능을 통해 일반 상자와 파손 상자를 분류하고, 파손 상태일 시 소비자와 택배사에 알람으로 보고하는 것을 주 기능으로 하고 있다. 딥러닝 네트워크 훈련을 위해 약 1,000장의 데이터셋을 직접 구성하고 학습하였다. 본 설계에서 사용된 택배 상자 파손 여부 분류기의 분류 정확도는 93.33%이고, 이 분류 성능은 택배 상자의 상태를 분류하는 데 있고, 정확도의 분류 성능이라고 할 수 있다.
DBD 플라즈마에 의한 연료개질 및 층류 화염 특성 변화
김은강(Eungang Kim),박선호(Sunho Park),송영훈(Young-Hoon Song),이원남(Wonnam Lee) 한국연소학회 2014 KOSCOSYMPOSIUM논문집 Vol.2014 No.11
Fuel/N₂ and fuel/air mixtures were treated with non-thermal DBD plasma and the changes in characteristics of laminar diffusion flame have been observed. Flame of fuel/N₂ mixture generated more soot under plasma condition while less amount of soot was formed from fuel/air mixture flame. Luminescence spectrum and gas chromatography results confirmed that plasma energy converts a fraction of fuel molecules into radicals, which then form C₂, C₃, C₄ and higher hydrocarbon under no oxygen condition or turn into CO, CO₂ and H₂O when oxygen is present.
끝이 잘린 피라미드형 거울을 이용한 87Rb 원자 포획 및 원자빔 생성
서선영,김은강,Ashish Kumar Sharma,고준태,김중복 한국물리학회 2020 새물리 Vol.70 No.7
In this study, a truncated pyramidal mirror was used to generate a magneto-optical trap (MOT) of 87Rb atoms and a continuous cooled atomic beam therefrom. The pyramidal mirror has an angle of 90◦ between facing sides, and the tip has a squarehorn shape with an 18-mm length on one side. The size of the cut is 6 mm × 6 mm. The number of trapped atoms was measured to be about 107 atoms. The mean velocity of the atomic beam inside the pyramidal mirror is 3.58 m/s - 20.8 m/s, the flux is 3.6 × 107 atoms/s - 2.1 × 108 atoms/s, the atomic beam velocity distribution is 0.73 m/s - 7.34 m/s and the atomic beam temperature is 4 mK - 323 mK, respectively. This study confirms the feasibility of miniaturization of a continuously cooled atomic beam generator and provides basic data for the commercialization of atomic precision measurement technology. 본 연구에서는 끝이 잘린 피라미드형 거울을 이용하여 87Rb 원자를 광자기 포획하고 그로부터 연속적인 냉각된 원자빔을 생성하였다. 피라미드형 거울은 마주보는 면 사이의 각이 90◦ 이고 한 변의 길이가18 mm인 정사각뿔의 끝이 잘려 있는 형태로 잘린 부분의 크기는 6 mm × 6 mm이다. 광자기 포획된원자의 수는 약 107 개 정도로 측정되었다. 피라미드형 거울 내부에 생긴 원자빔의 평균 속도는 3.58 m/s – 20.8 m/s, Flux는 3.6 × 107 atoms/s - 2.1 × 108 atoms/s이고, 원자빔의 속도 분포는 0.73 m/s – 7.34 m/s로 원자빔의 온도는 4 mK – 323 mK으로 측정되었다. 본 연구는 연속적인 냉각된 원자빔 발생장치의 소형화 가능성을 실험적으로 확인하였으며, 원자기반의 정밀측정 기술의 상용화에 있어 기초적인자료가 될 수 있을 것이다.
광자기 포획을 위한 실리콘 기반 피라미드형 거울의 편광 특성 연구
강석태,이동진,김은강,김중복,엄준성,진준태,이승섭 한국물리학회 2017 New Physics: Sae Mulli Vol.67 No.7
We investigated the image of light reflected by a pyramidal mirror with a vertex angle of 70.5 degrees and a length of one side of 1.5 mm. The pyramidal mirror was produced by using photolithography, bulk etching of silicon, and electroplating. As a result, three different types of reflection paths were observed, and the changes in the polarization of the reflected light were measured for each of the three types. In addition, the polarization change was theoretically calculated by using the Fresnel equation with the reflection angle for each of the three types and the complex refractive index of the mirror. The validity of the measured values was verified through comparison with the theoretical values, and an analytical model for the change in the polarization caused by reflection from a pyramidal mirror with a vertex angle of 70.5 degrees was developed. 우리는 광 리소그라피와 실리콘의 화학적 식각 과정 및 전기도금을 통해 한 변의 길이가 1.5 mm이고 70.5$^\circ$의 꼭지각을 갖는 피라미드형 거울을 제작 하였으며, 거울 면에 의한 반사광의 상을 관찰하여 조사하였다. 그 결과, 3가지 유형의 반사 경로가 있음을 확인하였으며, 각 유형의 반사광의 편광 변화를 측정하였다. 또한 3가지 유형에서의 반사각과 반사 물질의 복소 굴절율을 고려하여 프레넬 방정식을 통한 이론적 계산을 수행하였다. 이론값과의 비교를 통해 측정값의 타당성을 검증하였으며, 꼭지각이 70.5$^\circ$인 피라미드형 거울의 편광 변화 분석 모델을 구축하였다.
박문규,김나윤,김은강,유시현 한국신뢰성학회 2015 한국신뢰성학회 학술대회논문집 Vol.2015 No.11
RAM성능결정은 시스템 엔지니어링 프로세스를 통하여 신뢰성, 가용성 및 유지보수성 성능특성을 제품의 고유한 성질로 통합하는 엔지니어링 관리의 한 분야이다. 이는 시스템 설계ㆍ개발에서 운영적인 목적을 성공적으로 성취하고, 지속적으로 시스템 운용적인 성능을 관리하기 위하여 수행된다. 최근 국내외 철도차량 관련 프로젝트의 대부분은 시스템 제품에 대하여 RAM성능을 요구하고 있다. 따라서 국내외 철도 차량산업에서 운용조건에 최적화된 제품의 RAM 성능조건은 매우 중요한 이슈가 되고 있다. 하지만 국내 철도차량산업에서는 운영조건에 적합한 RAM성능을 효과적으로 산출하는 방법을 제시하지 못하고 있다. 따라서 본 논문은 운영가용도 목표를 기반으로 운영, 유지보수 및 로지스틱 지원 개념 분석을 통한 시스템 수준에서 RAM 성능을 계산하는 방법과 유사시스템의 시스템 데이터를 통하여 RAM 성능을 검증하는 방법에 대하여 제시한다.
다양한 온도조건에서 압전체 센서 자가진단법의 실험적 고찰
조혜진(HyeJin Jo),김은강(EunKang Kim),공예슬(YeSeul Kong),김지민(JiMin Kim),박제운(JeWoon Park),이경이(KyoungLee Lee),이지현(JiHyeon Lee),박규해(Gyuhae Park) 대한기계학회 2014 대한기계학회 춘추학술대회 Vol.2014 No.11
An active sensor diagnostics procedure, where the sensors/actuators are confirmed to be functioning properly during operation, is a critical component to successfully complete the structural health monitoring (SHM) process. The impedance-based piezoelectric sensor diagnostics process tracks the changes in the capacitive value of piezoelectric materials, which shows up in measured admittance. A change in the capacitive value indicates changes in sensor conditions, including sensor fracture and de-bonding. The effect of temperature variations in the high temperatures and cryogenic range on the performance of the impedance-based piezoelectric sensor diagnostics, along with the sensing capability of piezoelectric active-sensors, was experimentally studied. The results of this study indicate that the impedance-based sensor diagnostic processes is capable of detecting faulty sensors even at the high temperatures and cryogenic temperatures, thereby allowing piezoelectric sensors to be effectively used for dynamics and SHM sensing at high temperature and cryogenic temperature ranges.