http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
무위험 금리평형의 불균형: 금리․환율 개별 충격의 동태효과 분석
김윤영(Yun-Yeong Kim) 한국계량경제학회 2010 JOURNAL OF ECONOMIC THEORY AND ECONOMETRICS Vol.21 No.2
본고에서는 외환위기 이후 우리나라의 무위험 금리 평형조건 (covered interest rate parity)의 불균형 오차 (disequilibrium error)와 국내외 금리 및 현ㆍ선물환율 개별충격과의 동태적 상관관계를 살펴보았다. 이를 위하여 김윤영⋅박준용 (2008), Kim(2008, 2009), Kim and Park (2008), 김윤영 (2009)을 따라 무위험 금리평형을 구성하는 변수들을 개별적으로 모두 고려한 VAR 모형에서 유도된 변환 오차수정모형을 도입하였다. 충격반응, 그랜저 검정 등의 분석 결과 2000 년대 들어 우리나라의 무위험 금리평형 불균형 오차는 환율 보다는 주로 국내외 금리 부분에서의 충격에서 유발되는 것으로 나타났다. 또한 국내외 금리 및 현ㆍ선물환율 간의 장기 공적분 관계의 추정계수로 정의된 불균형 오차를 이용하여 동일한 동태분석을 실시한 경우와 구조모형의 식별 순서를 바꾼 경우에도 유사한 결과가 도출되었다. 그러나 무위험 금리평형 불균형 오차가 금리와 환율 변수에 미치는 영향은 분석 방법에 따라 상이하게 나타났다. 따라서 우리나라의 경우 환율ㆍ외환 정책 보다는 통화정책이 더 무위험 금리평형의 불균형을 유발하는 요인이 될 수 있으므로 통화당국의 기준금리 결정시 이를 고려해야 할 것으로 판단된다. This paper analyzes the dynsmics and determinants of disequilibrium error in the covered interest parity (CIP) thrpough the transformed error correction model following Kim and Park (2008), Kim (2008, 2009), Kim and Park (2008) and Kim (2009). According to the dynamic analyses including impulse response analyses and Granger causality test, I found the CIP disequilibrium error may be mainly caused not by the foreign exchange rate part but by the domestic and foreign interest part. However the dynamic effect of the CIP error to the interest rates and exchange rates was not meaningful. These results imply that there may be restrictions to hinder the arbitrage transaction to clear the CIP disequilibrium quickly. A restriction to this direction is the credit risk of Korean financial market and any policy reaction to reduce it may be necessary. For instance, any effort to inform the sound fundamentals of Korean economy in the international financial markets may be useful.
鉛中毒에 있어서 高麗人蔘根 및 甘草根 水浸液의 解毒?果에 관한 硏究
金潤榮 中央醫學社 1983 中央醫學 Vol.45 No.4
The weaning practice of 150 infants aged from 3 months to 3 years was investig-ated by interviewing their mothers and by using a-series of questionnaire during the :period of July 25 through August 4, 1983. The study was conducted in An-bong City. Kyung-Buk, Korea and the results were as follows; 1. 50.7% of the infants were .breast-fed, 29.4% were bottle-fed, and 19.9% were mixed-fed before weaning. 2. 80% of the infants were practiced with weaning with 6 months after birth. 50% of total were continued weaning through 12 months old and 44.8% were through 13 to 18 months. 3. The first given supplementary or weaning foods were Yogurt: 23.3% Milk; :14.6% Gerber; 13.4% Cerelac; 12.7%. Mothers were much concerned about the supplementary foods and were very sen-sitive to their infants responses. Although the cereal foods were the chief supplementary (27. 3%), they were pre-pared together with other additional foods. 4. Mothers with higher education, younger age showed greater concerns about the weaning practice for their infants.
표면확산계수의 국부적 제어를 통한 실리콘-게르마늄 박막상 표면구조물의 정렬에 관한 수치해석적 연구
김윤영,한봉구,Kim, Yun Young,Han, Bong Koo 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.1
본 논문에서는 헤테로 애피택시(heteroepitaxy) 박막의 표면확산계수를 국부적으로 제어하여 표면에서 형성되는 나노구조물이 정렬되는 과정을 수치해석적으로 연구하였다. 격자 불일치 물질계(lattice-mismatched materials system)의 탄성변형에너지와 표면자유에너지, 그리고 습윤에너지를 고려하여 박막의 변형거동에 대한 지배방정식을 도출하였으며, 확산계수의 활성화 조건이 성장에 미치는 영향을 살펴보았다. 해석결과는 주기함수 형식으로 표면확산계수를 제어하면 표면구조물이 배열 형태로 정렬됨을 나타내며, 이는 노광 및 식각 과정을 거쳐야 하는 포토리소그래피(photolithography)로부터 탈피한 바텀업(bottom-up) 방식의 공정방법에 규칙성을 부여하여 차세대 나노기기의 개발에 일조할 것으로 기대된다. This paper presents a numerical study on the alignment of ridge-like surface structures evolving on silicon-germanium thin films under localized modulation of surface diffusivity. A situation is considered in which the surface diffusion of film material is selectively promoted such that its morphology is perturbed to periodic patterns. To simulate the growth behavior, a governing equation is formulated taking the surface chemical potential into account, and its solution is numerically sought using a finite-difference method. Results show that an initially planar surface coalesces upon the diffusivity modulation, and the surface structures can be aligned by changing the frequency of modulation condition. This research suggests a bottom-up fabrication technique that can manage the regularity of surface structures for thin film devices.