http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김운하,강성윤,김정현,권영우 한국전자통신연구원 2014 ETRI Journal Vol.36 No.2
214 Unha Kim et al. © 2014 ETRI Journal, Volume 36, Number 2, April 2014http://dx.doi.org/10.4218/etrij.14.2113.0046A fully-integrated penta-band reconfigurable poweramplifier (PA) is developed for handset Tx applications. The output structure of the proposed PA is composed of thefixed output matching network, power and frequencyreconfigurable networks, and post-PA distribution switches. In this work, a new reconfiguration technique is proposedfor a specific band requiring power and frequencyreconfiguration simultaneously. The design parameters forthe proposed reconfiguration are newly derived andapplied to the PA. To reduce the module size, the switchesof reconfigurable output networks and post-PA switchesare integrated into a single IC using a 0.18 μm silicon-oninsulatorCMOS process, and a compact size of 5 mm × 5mm is thus achieved. The fabricated W-CDMA PA moduleshows adjacent channel leakage ratios better than –39 dBcup to the rated linear power and power-added efficienciesof higher than around 38% at the maximum linear outputpower over all the bands. Efficiency degradation is limitedto 2.5% to 3% compared to the single-band reference PA.
김운하,정기태,조용환 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.1
광여기 MQW(Multiple Quantum Well)면형 광증폭기에 대한 이득해석과 더불어 제작 및 측정을 수행하였다. 제안된 광증폭기는 편광무의존성, 광섬유와의 높은 결합효율, 그리고 동작파장의 자유도가 높다는 등의 장점을 자니고 있다. 본 논문에서는 100내지 200주기 MQW의 이득특성을 격자왜곡과 선택도핑의 효과를 고려해 해석하였다. 그 결과, 3㏈정도의 단일경로이득과 넓은 동작파장특성을 나타내었으며 이 해석 결과는 우리들이 행한 실험결과와 거의 일치하였다. 면형 광증폭기의 단일경로이득이 낮으면 FPI(Fabry-Perot Interferometer)구조로 증폭률을 높이는데는 협대역성의 문제가 발생하나,2-3㏈이상의 적정한 단일경로이득을 가질 경우, FPI 구조로 고이득과 적정한 동작파장특성을 가지게 할 수 있다. 예를 들면 단일경로이득이 3㏈인 MQW를 FPI 구조로 할 경우, 최대이득 10.1㏈, 동작파장대역이 4.6nm의 특성을 가지도록 할 수 있음을 보였다. This paper analyzes and accesses the gain of optically pumped surface-normal MQW optical amplifiers. The proposed amplifiers have the advantage of polarization independence, high coupling efficiency to and from optical fibers, and flexibility of operating wavelength. We analyzed the gain characteristics of 100 - 200-period MQWs and verified the dependence of a strained lattice and selective doping. Theoretical analysis of such MQWs showsa single-pass gain of 3 dB with broad operation bandwidth. A single-pass gain of 2.6 dB is obtained experimentally in an InGaAs/InGaAlAs MQW amplifier, which is compared with calculations. The use of Fabry-Perot interferometer (FPI) structure in an optical amplifier is a useful way to increase the gain, but causes a problem of narrow operation bandwidth when the single-pass gain is low. Therefore, a single-pass gain above 2to 3 dB is a prerequisite to achieve both a high gain and moderate operation bandwidth in FPI-structured opticalamplifiers. We have designed an FPI-structured surface-normal optical amplifier both with a high gain of broad operation bandwidth of 4.6mm, when a single-pass gain is 3 dB.
ATM망에서 ABR 서비스를 위한 ER 스위치 폭주 제어 알고리즘의 성능 개선
김운하,박성곤,조용환 한국통신학회 1997 韓國通信學會論文誌 Vol.22 No.9
본 연구에서는 ATM 망의 ABR 서비스 트래픽 제어를 위해 새로운 ER 피드백 제어 알고리즘인 EMRCA(Explicit Max_min Rate Control Algotithm)을 제안한다. 이 방식은 과도상태와 평형상태에서의 ACR 변화를 해석하였고, 스위치 노드에서의 폭주를 찾아내기 위하여 큐에 있는 두 개의 임계치 $TH_{high}$ 와 $TH_{low}$를 사용하였고, 연결들 간의 최소 전동률과 최대 전송률의 차이를 줄여 링크 대역 이용률을 높이고자 한다. 이 제안 방식은 폭주가 발생한 연결을 선택하기 위하여 활성화된 모든 연결에 대하여 최소 전송률과 최대 전송률을 사용하여 선택된 연결들의 전송률을 조정함으로써 잠재적인 폭주발생을 예방시켜 주는 폭주탐지 메커니즘을 사용한다. EMRCA 방식은 EPRCA 방식보다 ACR 변화가 더욱 안정됨을 보여주었고, 또한 스위치의 큐 길이를 감소시켰고, 높은 링크 이용률을 얻을 수 있었다. A new ER feedback switch control algorithm, called EMRCA(Explicit Max-min Rate Control Algorithm), to control the ABR services traffic in the ATM networks, is proposed in this thesis. This scheme was interpreted the ACR variation residing on between a transient state and a stable state using the two thresholds that is the $TH_{high}$ and $TH_{low}$ in the queue to detect switch nodes congestion, and decreased the difference of minimum and maximum ACR all active connection to enhance the line bandwidth utilization. The proiposed scheme used a minimum and maximum rate of all active connections to select the connection whose the congestion rate inveoked, and uses a congestion detection mechanixm to prevent some potential cogestion by regulating selected contection.s The EMRCA scheme showed ACR variation more stable that the EPRCA scheme, also reduced buffer size of the switch, and achieved higher link utilization than the EPRCA scheme.