http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용현,김영훈,김한군 ( Y . H . Kim,Y . H . Kim,H . G . Kim ) 한국열처리공학회 1997 熱處理工學會誌 Vol.10 No.1
The variation of the mechanical properties and the formation of retained austenite with heat treatment conditions in austempered Si bearing carbon steels has been investigated. In the case of a steel containing 0.35C-1.48Si-0.95Mn, it has been found that a feather shape bainite structure of lath are obtained under a isothermal treated condition at just below the Ms temperature, and the martensite, bainitic ferrite and retained austenite of second phase particles on the ferrite matrix for a isothermal treated steels after intercritical annealing are precipitated in a linked shape. The retained austenite with 2㎛ size induced as TRIP is found to increase with increasing the formation rate of retained austenite for the intercritical annealing and high Si containing steels. The tensile strength is increased as austempering temperature increases in all isothermal treatment temperature, whereas the elongation is shown to roughly decrease as the tensile strength increases. The values of tensile strength-elongation balance have showed a marked dependence upon the elongation rather than the tensile stregth, and their values are increased for high Si containing steels and intercritical annealing condition. The most optimum result has been shown to be the tensile stregth-elongation balance of 2882.4kgf/㎟.% and the elongation of 33.3% for a B steel in the heat treating temperature range of 780∼370℃.
김용현,이승연,김원일,Kim, Yong-Hyeon,Lee, Seung-Yeon,Kim, Won-Il 대한한방소아과학회 2008 대한한방소아과학회지 Vol.22 No.1
Objectives The purpose of this study was to examine the anti allergic reaction with Cheonmaec-tang. Methods We examined Cell Viability, ${\beta}$-hexosaminidase, TNF-${\alpha}$, IL-4 secretion from RBL-2H3 cell after pretreatment with 2 ㎎/ml, 4 ㎎/ml of Cheonmaec-tang. Results We observed that Cheonmaec-tang is reduced to ${\beta}$-hexosaminidase, TNF-${\alpha}$, IL-4 secretion in RBL-2H3 cell. Conclusions These results indicate that Cheonmaec-tang has anti-histamic effect and controls TNF-${\alpha}$, IL-4 secretion on allergic reaction.
애드혹 네트워크에서 에너지 소비 균형을 고려한 적응형 라우팅 프로토콜
김용현,홍윤식,Kim, Yong-Hyun,Hong, Youn-Sik 한국정보처리학회 2008 정보처리학회논문지 C : 정보통신,정보보안 Vol.15 No.4
ad-hoc네트워크에서 네트워크의 생존시간을 연장하기 위해서는 네트워크 트래픽 부하를 전체 네트워크에 골고루 분산시켜 노드당 평균 에너지 소모율을 균일하게 유지할 수 있어야만 한다. 본 논문에서는 노드의 에너지 잔량 및 사용 빈도 등을 고려해 경로를 설정하는 수정 AODV 프로토콜을 제안하였다. 또한 경로 재설정 과정에서 생성되는 엄청난 양의 AODV 제어 메시지 발생으로 인한 에너지 소모를 줄이기 위해 출발지 노드의 버퍼에 다중 경로 정보를 저장하도록 하였다. 링크 단절 시 경로 재설정 과정 전에 경로 테이블에 저장된 경로 정보를 활용할 수 있도록 하였다. 본 논문에서 제안한 알고리즘의 성능 평가를 위해 기존 AODV 및 에너지 기반 라우팅 프로토콜인 MMBCR방식과 전체 노드의 에너지 잔량, 네트워크 생존시간 및 데이터 패킷 수신율 등 3가지 평가 항목을 사용해 비교하였다. To increase the lifetime of ad-hoc networks, a ratio of energy consumption for each node should be kept constant by equally distributing network traffic loads into all of the nodes. In this paper, we propose a modified AODV routing protocol to determine a possible route by considering a remaining battery capacity of a node and the degree of its usage. In addition, to reduce the amount of energy consumption during the path rediscovery process due to the huge amount of the AODV control messages the limited number of possible routes are stored into a routing table of a source node. When some links of a route fail, another possible path can be looked up in the table before the route discovery process should be initiated. We have tested our proposed method with a conventional AODV and a MMBCR method which is one of the power-efficient energy routing protocols based on the three performance metrics, i.e., the total remaining battery capacity, network lifetime and the ratio of data packets received by the destination node to compare their performance.
Zr<sub>2</sub>WP<sub>2</sub>O<sub>12</sub> 세라믹스의 합성과 소결거동 연구
김용현,김남옥,이상진,Kim, Yong-Hyeon,Kim, Nam-Ok,Lee, Sang-Jin 한국세라믹학회 2012 한국세라믹학회지 Vol.49 No.6
$Zr_2WP_2O_{12}$ powder, which has a negative thermal expansion coefficient, was synthesized by a solid-state reaction with $ZrO_2$, $WO_3$ and $NH_4H_2PO_4$ as the starting materials. The synthesis behavior was dependent on the solvent media used in the wet mixing process. The $Zr_2WP_2O_{12}$ powder prepared with a solvent consisting of D. I. water was fully crystallized at $1200^{\circ}C$, showing a sub-micron particle size. According to the results obtained from a thermal analysis, a $ZrP_2O_7$ was synthesized at a low temperature of $310^{\circ}C$, after which it was reacted with $WO_3$ at $1200^{\circ}C$. A new sintering additive, $Al(OH)_3$, was applied for the densification of the $Zr_2WP_2O_{12}$ powders. The cold isostatically pressed samples were densified with 1 wt% $Al(OH)_3$ additive or more at $1200^{\circ}C$ for 4 h. The main densification mechanism was liquid-phase sintering due to the liquid which resulted from the reaction with amorphous or unstable $Al_2O_3$ and $WO_3$. The densified $Zr_2WP_2O_{12}$ ceramics showed a relative density of 90% and a negative thermal expansion coefficient of $-3.4{\times}10^{-6}/^{\circ}C$. When using ${\alpha}-Al_2O_3$ as the sintering agent, densification was not observed at $1200^{\circ}C$.