http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전자기 유도 방식 무선 전력 전송을 위한 다중 탭을 갖는 평판형 스파이럴 안테나
김진욱(Jin-Wook Kim),손현창(Hyeon-Chang Son),정승호(Seung-Ho Jeong),김승균(Seung-Gyun Kim),김관호(Kwan-Ho Kim),박영진(Young-Jin Park) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.8
본 논문에서는 저주파 자기 유도(magnetic induction)를 이용한 무선 전력 전송 시스템을 위한 새로운 다중탭을 갖는 평판형 스파이럴 안테나 구조를 제시한다. 제안된 안테나는 사각 스파이럴 안테나와 같은 기존 상용 안테나에 비해 높은 전송 효율을 가지고, 안테나 개구면에서 고르게 전력을 전송할 수 있다. 검증을 위해 132 ㎑ 저주파에서 자기 유도를 이용한 무선 전력 전송을 위한 송수신 안테나 시제품을 제작하였다. 송신 안테나는 안테나 개구면에서 최대한 많은 양을 균일하게 송신할 수 있도록, 3중 탭을 갖도록 하였다. 수신 안테나는 수신부의 크기를 소형화하기 위해, 2중 탭을 갖도록 설계하였으며, 탭을 위해 단면을 사용한 경우와 직렬로 양면을 사용한 두 경우에 대해 설계 제작하였다. 측정 결과, 제안한 송수신 안테나는 기존의 안테나보다 3~10 ㏈ 이상 큰 전력을 송수신할 수 있었다. In this paper, a novel planar spiral antenna of multi-tabs is proposed for wireless power transmission system based on low frequency magnetic inductive coupling. The proposed antenna has higher transmission efficiency than conventional antennas such a rectangular spiral antenna and a spiral antenna. Also, it has a useful property of uniform power transmission in the region of the antenna aperture. For verification, a transmitting antenna and a receiving one for a wireless power transmission system using magnetic inductive coupling of 132 ㎑ low frequency are designed and tested. The transmitting antenna has three-tabs spiral of unequal-space for higher uniform magnetic coupling in the antenna aperture. For reducing the receiving antenna size, two receiving antennas of unequal space two-tabs on one-side and series double sides as well are designed, respectively. From measurement, transmission efficiency of the proposed antennas is improved up to 3~10 ㏈ compared to conventional antennas.
K<sup>+</sup>-β/β"-Al<sub>2</sub>O<sub>3</sub>의 고온 상관계와 소결성 분석
장민호,김승균,김석준,허정림,임성기,Jang, Min-Ho,Kim, Seung-Gyun,Kim, Seok-Jun,Haw, Jung-Rim,Lim, Sung-Ki 한국공업화학회 2009 공업화학 Vol.20 No.3
고체 산화물 전해질로 사용되고 있는 초 이온 전도체인 $K^+-{\beta}/{\beta}"-Al_2O_3$의 고온 상관계와 소결성 분석을 위하여 $K_2O-LiO_2-Al_2O_3$ 삼성분계로부터 고상반응을 통하여 순수한 $K^+-{\beta}/{\beta}"-Al_2O_3$ 분말을 합성한 후 slip casting방법과 냉간정수압성형에 의하여 tube와 disk형을 각각 제작하였다. Slip casting은 40 wt%의 고체함량을 가지는 슬러리를 사용해 알루미나 몰드에서 이루어졌고 냉간정수압성형은 20 MPa의 압력하에서 수행되었다. 성형체들은 $1600^{\circ}C$, $1700^{\circ}C$, $1750^{\circ}C$에서 각각 소결하여 성형방법에 따른 상관계와 소결밀도를 조사하였다. 냉간정수압성형에 의한 시편이 $1700^{\circ}C$까지 ${\beta}"-Al_2O_3$의 상분율이 월등히 높은 반면, 소결밀도에 있어서는 slip casting방법의 경우가 다소 높았다. 소결 시 상대밀도는 $1750^{\circ}C$에서 1 h 경과 후, 두 경우 모두 약 83%를 나타내었다. 90 min 이상 소결하였을 때는 입자의 과대성장과 기공으로 인해 오히려 밀도가 낮아졌다. In order to analyze the high temperature phase formation and the sinterability of super ionic conductor $K^+-{\beta}/{\beta}"-Al_2O_3$ which is commonly used as a solid oxide electrolyte, the pure $K^+-{\beta}/{\beta}"-Al_2O_3$ powder in the ternary system $K_2O-LiO_2-Al_2O_3$ was synthesized by solid state reaction and formed to tube and disk using slip casting method and cold isostatic pressing (CIP), respectively. The slip casting was conducted in an alumina mold with the slurry containing 40 wt% of solid contents and the CIP was carried out under 20 MPa. The samples were sintered at $1600^{\circ}C$, $1700^{\circ}C$ and $1750^{\circ}C$, respectively, and their phase formation and the sintering density were investigated according to the forming method. The samples produced by CIP showed far higher ${\beta}"-Al_2O_3$ fraction as compared with those by slip casting. On the other hand, the samples by slip casting showed slightly higher sintering density. The relative density reached to about 83% at $1750^{\circ}C$ and for 1 h, independent of the forming method. In the case of 90 min socking time, the density was decreased owing to the exaggerated grain growth and the pores by $K_2O$ evaporation.
a-IGZO TFT 기반 OLED 디스플레이 화소에 내장되는 OLED 열화 보상용 온도 센서의 개발
문승재 ( Seung Jae Moon ),김승균 ( Seong Gyun Kim ),최세용 ( Se Yong Choi ),이장후 ( Jang Hoo Lee ),이종모 ( Jong Mo Lee ),배병성 ( Byung Seong Bae ) 한국센서학회 2024 센서학회지 Vol.33 No.1
The quality of the display can be managed by effectively managing the temperature generated by the panel during use. Conventional display panels rely on an external reference resistor for temperature monitoring. However, this approach is easily affected by external factors such as temperature variations from the driving circuit and chips. These variations reduce reliability, causing complicated mounting owing to the external chip, and cannot monitor the individual pixel temperatures. However, this issue can be simply and efficiently addressed by integrating temperature sensors during the display panel manufacturing process. In this study, we fabricated and analyzed a temperature sensor integrated into an a-IGZO (amorphous indium-gallium-zinc-oxide) TFT array that was to precisely monitor temperature and prevent the deterioration of OLED display pixels. The temperature sensor was positioned on top of the oxide TFT. Simultaneously, it worked as a light shield layer, contributing to the reliability of the oxide. The characteristics of the array with integrated temperature sensors were measured and analyzed while adjusting the temperature in real-time. By integrating a temperature sensor into the TFT array, monitoring the temperature of the display became easier and more accurate. This study could contribute to managing the lifetime of the display.
손영일(Young-Il Sohn),김승균(Seung-Gyun Kim),이상문(Sang-Mun Lee),고영진(Young-Jin Ko),이경돈(Kyung-Don Lee) 한국자동차공학회 2009 한국자동차공학회 부문종합 학술대회 Vol.2009 No.4
In order to develop an active suspension for 6-wheeled vehicle, control simulations are carried out in this paper. The vehicle has 6 wheels with type of trailing arm suspension. Vehicle model is built using a multi-body dynamics simulation software. Based on this model, we connect Matlab/Simulink - a computer-aided control system design tool - to this model, making a co-simulation system. Sky-hook damping control and near constant force suspension control are used as main control strategies. Under single bump road profile, we compare the performances of these two algorithms. Furthermore, required maximum torque, rpm, and power under the road profiles are calculated using control simulation results.