http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fabrication and Interface Properties of TiNi/6061Al Composite
김순국,이준희,Kim, Sun-Guk,Lee, Jun-Hui Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.4
TiNi shape memory alloy was shape memory heat-treated and investigated its mechanical properties with the variation of prestrain. Also 6061 Al matrix composites with TiNi shape memory alloy fiber as reinforcement have been fabricated by Permanent Mold Casting to investigate the microstructures and interface properties. Yield stress of TiNi wire was the most high in the case of before heat-treatment and then decreased as increasing heat-treatment time. In each heat-treatment condition, the yield stress of TiNi wire was not changed with increasing the amount of prestrain. The interface bonding of TiNi/6061Al composite was fine. There was a 2$\mu\textrm{m}$ thickness of diffusion reaction layer at the interface. We could find out that this diffusion reaction layer was made by the mutual diffusion. The diffusion rate from Al base to TiNi wire was faster than that of reverse diffusion and the amount of the diffusion was also a little more than that of reverse.
김순국,지삼현,이강환,Kim, Sun-Guk,Chi, Sam-Hyun,Lee, Kang-Whan 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.6
Ad-hoc 망은 기반의 하부 구조 계층의 도움 없이 이동 노드와 클러스터(Cluster)들만으로 구성된 유연한 무선 통신망이다. 본 논문에서는 이동 노드의 다양한 상황 정보를 분석하여 효율적인 온톨로지(Ontology) 기반의 상황인식(Context-Aware) 기술을 적용한 네트워크의 변화에 대한 예측이 가능한 추론망을 연구 제안한다. 제안된 구조에서는 각 노드간의 거리 정보등 상황정보를 이용한 분석으로부터 망을 형성하기 위한 초기단계와 노드의 상태값을 비교하여 노드의 경로를 예측 유지 및 분석하는 단계로 구성된다. 제안하고자 하는 RODMRP(Resilient Ontology-based Dynamic Multicast Routing Protocol)의 추론망 구조는 이동 노드간의 변화된 환경에서 복원력이 뛰어난 트리 구조의 효율적인 packet를 제공한다. Ad-hoc network is soft wireless communication network that is consisted of mobile node and clusters without helping of infrastructure. We propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. Proposed structure is consisted of context awareness parameters as like distance between each nodes. The proposed architecture performs two types of routing discovery. One is Flooding Discovery Routing(FDR) for comparing analysis step and Local Discovery Routing(LDR) to compose path of node forecast(preservation) step from node's state value. The inference network structure of proposed RODMRP(Resilient Ontology-based Dynamic Multicast Routing Protocol) adopts a tree structure to enhance an efficient packet in various environment between mobile node. We will have developed an algorithm that will desist multi-hierarchy Layered networks to simulate a desired system.
김순국,장창우,이준희,정찬회,서용권,강충길,Kim, Soon-Kook,Jang, Chang-Woo,Lee, Jun-Hee,Jung, Chan-Hoi,Seo, Yong-Gwon,Kang, Choong-Gil 한국재료학회 2006 한국재료학회지 Vol.16 No.8
In recent years, Magnesium (Mg) and its alloys have become a center of special interest in the automobile industry. Due to their high specific mechanical properties, they offer a significant weight saving potential in modern vehicle constructions. Most Mg alloys show very good machinability and processability, and even the most complicated die-casting parts can be easily produced. The die casting process is a fast production method capable of a high degree of automation for which certain Mg alloys are ideally suited. In this study, step-dies and flowability tests for AM50 were performed by die-casting process according to various combination of casting pressure and plunger velocity. We were discussed to velocity effect of forming conditions followed by results of microstructure, FESEM-EDX, hardness and tensile strength. Experimental results represented that the conditions of complete filling measured die-casting pressure 400 bar, 1st plunger velocity 1.0 m/s and 2nd plunger velocity 6.0 m/s. The increasing of 2nd plunger velocity 4.0 to 7.0 m/s decreased average grain size of $\alpha$ phase and pore. It was due to rapid filling of molten metal, increasing of cooling rate and pressure followed by increased 2nd plunger velocity. The pressure should maintain until complete solidification to make castings of good quality, however, the cracks were appeared at pressure 800bar over.
장자영,노순국,김송민,김재섭,허영팔,박창균 조선대학교 동력자원연구소 1997 動力資源硏究所誌 Vol.19 No.1
Being adopted the Cellular Systems in Korea, the method of a radio repeater is that the mobile station(MS) can be used only in a service area of the base station(BS). In case that traffic congestion is occured around the specific BS because of an event etc., the traffic blocking rates are being maximized and the subscriber service is being dropped. To improve these problems, we propose an algorithm for a radio repeater network that distributes the traffics of the specific BS, predicted traffic congestion, to an adjacent BS by sharing a service area. And then, we confirm the valid through the simulation.
Ni계 합금분말 용사 코팅기술을 적용한 롤 제조기술 연구
박지웅,김순국,반계범 한국분말재료학회 2022 한국분말재료학회지 (KPMI) Vol.29 No.2
The purpose of this study is to improve the mechanical properties and develop manufacturing technology through self-soluble alloy powder flame spray coating on the surface of a run-out table roller for hot rolling. The roller surface of the run-out table should maintain high hardness at high temperatures and possess high wear, corrosion, and heat resistances. In addition, sufficient bonding strength between the thermal spray coating layer and base material, which would prevent the peel-off of the coating layer, is also an important factor. In this study, the most suitable powder and process for roll manufacturing technology are determined through the initial selection of commercial alloy powder for roll manufacturing, hardness, component analysis, and bond strength analysis of the powder and thermal spray coating layer according to the powder.