http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김봉철,박원서,강연희,이충국,유형석,강석진,이상휘,Kim, Bong-Chul,Park, Won-Se,Kang, Yon-Hee,Yi, Choong-Kook,Yoo, Hyung-Suk,Kang, Suk-Jin,Lee, Sang-Hwy 대한악안면성형재건외과학회 2007 Maxillofacial Plastic Reconstructive Surgery Vol.29 No.6
The accuracy of model surgery is one of important factors which can influence the outcome of orthognathic surgery. To evaluate the accuracy of digitalized model surgery, we tried the model surgery on a software after transferring the mounted model block into a digital model, and compared the results with that of classical manual model surgery. We could get the following results, which can be used as good baseline analysis for the clinical application. 1. We made the 3D scanning of dental model blocks, and mounted on a software. And we performed the model surgery according to the previously arranged surgical plans, and let the rapid prototyping machine produce the surgical wafer. All through these process, we could confirm that the digital model surgery is feasible without difficulties. 2. The digital model surgery group (Group 2) showed a mean error of $0.0{\sim}0.1mm$ for moving the maxillary model block to the target position. And Group 1, which was done by manual model surgery, presented a mean error of $0.1{\sim}1.2mm$, which is definitely greater than those of Group 2. 3. Remounted maxillary model block with the wafers produced by digital model surgery from Group 2 showed the less mean error (0.2 to 0.4 mm) than that produced by manual model surgery in Group 1 (0.3 to 1.4 mm). From these results, we could confirm that the digital model surgery in Group 2 presented less error than manual model surgery of Group 1. And the model surgery by digital manipulation is expected to have less influence from the individual variation or degree of expertness. So the increased accuracy and enhanced manipulability will serve the digital model surgery as the good candidate for the improvement and replacement of the classical model surgery, if careful preparation works for the clinical adjustment is accompanied.
Point-based surface best fit 알고리즘을 이용한 디지털 치아 모형과 3차원 CT 영상의 중첩 정확도
김봉철,이채은,박원서,강정완,이충국,이상휘,Kim, Bong-Chul,Lee, Chae-Eun,Park, Won-Se,Kang, Jeong-Wan,Yi, Choong-Kook,Lee, Sang-Hwy 대한구강악안면외과학회 2008 대한구강악안면외과학회지 Vol.34 No.5
Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.
적색안료인 α-Fe<sub>2</sub>O<sub>3</sub>와 투명 유전체의 반응
김봉철,한용수,송윤호,서경수,이진호,이남양,박이순,이병교,Kim, Bong-Chul,Han, Yong-Soo,Song, Yoon-Ho,Suh, Kyung-Soo,Lee, Jin-Ho,Lee, Nam-Yang,Park, Lee-Soon,Lee, Byung-Kyo 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.3
적색 칼라 필터 재료인 ${\alpha}-Fe_2O_3$가 고온 제조 공정을 거치는 동안 화학적인 안정성에 관해서 연구한 것이다. PDP(Plasma Display Panel)에 있어서 통상적으로 칼라 필터 층의 위에 사용되고 있는 투명 유전체의 경우는 광의 투과도를 높이기 위하여 ZnO를 첨가한다. ZnO가 포함되어 있는 유전체의 경우는 500$^{\circ}$C 이상에서 ${\alpha}-Fe_2O_3$의 열적 안정성을 감소시켜 칼라 필터로서의 기능을 완전히 상실하게 되어 투명하게 된다. 반면에 ZnO가 포함되지 않는 투명 유전체의 경우는 ${\alpha}-Fe_2O_3$가 적색의 색상을 유지하면서 칼라필터로서의 기능을 유지하고 있었다. ${\alpha}-Fe_2O_3$가 칼라 필터로 기능을 유지하기 위해서는 ${\alpha}-Fe_2O_3$와 접촉하는 투명 유전체는 ZnO가 포함되지 않는 투명 유전체를 사용하여 1차 보호막을 형성한 후 그 위에 ZnO가 포함된 투명 유전체층을 형성하면 적색 칼라 필터가 색상을 유지하게 된다. We searched thermal stability of ${\alpha}-Fe_2O_3$ using red color filter for display. In the PDP(Plasma Display Panel), the color filter layer is lied normally between front glass and transparent dielectric materials, so it might be needed to study the reaction of ${\alpha}-Fe_2O_3$ and transparent dielectric materials. The transparent dielectric materials containing ZnO has good transparency. Red colorlayer of ${\alpha}-Fe_2O_3$ contacted with dielectric material layer containing ZnO is changed to colorlessness over 500$^{\circ}$C because ZnO defuse ${\alpha}-Fe_2O_3$, the dielectric materials without ZnO, however, maintain red color at the same condition. We suggest that a layer contacting with ${\alpha}-Fe_2O_3$ red color layer has to lie with transparent dielectric materials without ZnO, then the materials containing ZnO is coated over to get color of ${\alpha}-Fe_2O_3$ for red color filter
호텔·관광전공 대학생의 공감능력이 회복탄력성과 전공만족도에 미치는 영향 : 감사성향의 매개 효과
김봉철 ( Kim Bong-chul ) 한국관광산업학회 2020 Tourism Research Vol.45 No.4
본 연구는 호텔, 관광 전공 관련 대학생들을 대상으로 공감능력이 회복탄력성과 전공만족도에 미치는 영향과 감사성향이 회복탄력성과 전공만족도에 어떠한 매개효과가 있는지를 검증하고자 진행하였다. 연구목적을 달성하기 위해 관련된 선행연구를 바탕으로 연구모형과 가설을 설정하였으며, 연구모형 및 가설 검증에 따른 실증적 분석 결과는 다음과 같다. 첫째, 공감능력이 감사성향에 유의한 정(+)의 영향을 미칠 것으로 예측한 결과, 공감능력의 하위요인 정서공감은 유의한 정(+)의 영향을 미치는 것으로 나타났으나, 정서공감은 감사성향에 의미 있는 영향을 미치는 변수로 보기어려워 기각되었다. 둘째, 감사성향은 회복탄력성에 유의한 유의한 정(+)의 영향을 미치는 것으로 나타났다. 셋째, 감사성향은 전공만족도에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 넷째, 회복탄력성은 전공만족도에 유의한 정(+)의 영향을 미치는 것으로 나타났다. 매개효과와 관련해서, 공감능력의 인지공감은 감사성향을 매개로 회복탄력성의 유의한 정(+)의 영향을 미치는 것으로 나타났으나, 공감능력의 정서공감은 감사성향에 매개로 회복탄력성에 간접효과의 유의한 영향을 미치지 않는 것으로 나타났다. 마지막으로 공감능력의 인지공감은 감사성향을 매개로 전공만족도의 유의한 정(+)의 영향을 미치는 것으로 확인되었었으나, 공감능력의 정서공감은 감사성향에 매개로 전공만족도에 간접효과의 유의한 영향을 미치지 않는 것으로 나타났다. 본 연구의 시사점은 호텔, 관광 전공 대학생 공감능력이 회복탄력성과 전공만족도에 미치는 영향력과 감사성향이 갖는 매개효과를 파악했다는 점에서 의미가 있으며, 전공학과와 관련 실무자 교육에 시사점을 제공한다. This study was conducted on university students related to hotel and tourism majors to find out how empathic ability affects resilience and satisfaction in major, and how gratitude disposition has mediate effects between resilience and satisfaction in major. The study model and hypothesis were established based on the relevant precious research. The empirical analysis results of the study model and hypothesis verification are as follow. First, the hypothesis that empathic ability would have a significant positive effect on the gratitude disposition showed that emotional empathy, a sub-factor of empathy, had a significant positive effect, but cognitive empathy, another sub-factor of empathy, was rejected as a variable that had a significant effect on the gratitude disposition. Second, the gratitude disposition had a significant positive effect on resilience. Third, the gratitude disposition had a significant positive effect on the satisfaction in major. Fourth, resilience positively impacted on the satisfaction in major. As for the mediate effect, cognitive empathy had a significant indirect effect on resilience through the gratitude disposition. but Emotional empathy on resilience was found that there was no significant impact on indirect effects. Finally, the cognitive empathy impacted the satisfaction in major through the gratitude disposition, but the emotional empathy did not significantly affect the satisfaction in major through the mediate variable, the gratitude disposition. The theoretical implication of this study have identified the influence of empathic ability among college students majoring in hotel and tourism management. It is also meaningful in that it has identified the mediate effect of the gratitude disposition of university students related to service majors as stated above. The results of this study will provide implications for the major department of college and the relevant industry employees.
호텔 종사원의 서비스 특성이 관계품질에 미치는 영향에 관한 연구
김봉철 ( Bong Chul Kim ),김연수 ( Yeon Soo Kim ) 한국관광산업학회 2014 Tourism Research Vol.39 No.4
본 연구는 호텔 종사원의 서비스 특성이 관계품질에 미치는 영향을 검증하기 위해 진행되었다. 서비스 접점에서 종사원은 고객이 지각하는 위험성을 낮추고 상호 신뢰 관계를 충족시키는 중요한 역할을 한다. 따라서 본 연구는 첫째, 고객접점 상황에서 종사원의 서비스 특성이 관계품질에 미치는 영향을 살펴보고, 둘째, 관계품질을 구성하는 만족과 신뢰의 영향관계를 살펴보고자 한다. 본 연구의 목적을 달성하기 위해서 서울시내 특1급 호텔이용고객을 대상으로 총501부의 유효 설문지가 수집되었으며, 자료는 SPSS 18.0을 사용하여 분석하였다. 본 연구의 결과는 첫째, 서비스 특성이 인지적 만족에 미치는 영향에 있어, 역량 및 전문지식, 신속한 해결능력, 예의성, 유사성이 통계적으로 유의한 결과를 나타냈다. 서비스 특성과 감정적 만족의 영향관계에서는 역량 및 전문지식, 신속한 해결능력, 공감성, 유사성만이 긍정적인 영향을 미치는 것으로 나타났다. 둘째, 서비스 특성이 신뢰에 미치는 영향관계를 검증한 결과 인지적 신뢰는 역량 및 전문지식, 신속한 해결능력, 예의성, 유사성만이 긍정적인 영향을 미쳤으며, 감정적 신뢰의 경우 역량 및 전문지식, 신속한 해결능력, 유사성이 영향을 미치는 것으로 나타났다. 마지막으로, 관계품질의 구성요소인 만족과 신뢰의 영향관계에서 인지적, 감정적 만족 모두 신뢰에 긍정적인 영향을 미치는 것으로 나타났다. 본 연구의 이론적 시사점으로는 첫째, 서비스 특성연구의 범위를 호텔서비스 영역으로 확대하였다는 점이다. 둘째, 관계품질의 하위요소인 만족과 신뢰를 인지적 측면과 감정적 측면으로 구분하여 다차원적 측정을 시도하였으며 만족과 신뢰의 영향관계를 인지, 만족 차원으로 각각 검증하였다는 점이다. 또한 실무적 측면에서, 접점종사원들의 전문적 역량강화 지원 프로그램이 필요하며, 감정적 차원의 요소들을 충족시키기 위한 내부직원 만족도 개선이 요구되는 것으로 판단된다. The purpose of this study is to examine how hotel employee``s service characteristics affect the relationship quality perceived by hotel guests. The role of employees working at the service contacting point is very important to lower the perceived risk and satisfy customers in the mutual relationship between customers and employees. Therefore, this study is aimed at analyzing, first, the influence of employee``s service on relationship quality at the service contacting point, and second, the relationship between satisfaction and trust that forms relationship quality. A total of 501 questionnaires were obtained from upscale hotels in Seoul. Data was analyzed by SPSS ver.18.0. Findings of this study are 1) competence, expertise, ability to customize solutions, promptness, politeness and perceived similarity between service representative and customer positively impact on cognitive satisfaction. Competence, expertise, ability to customize solutions, empathy and perceived similarity between service representative and customer positively influence satisfaction 2) cognitive trust positively influences competence, expertise, ability to customize solutions, politeness, and perceived similarity while affective trust influences competence, expertise, ability to customize solutions, and perceived similarity. Lastly, 3) both emotional and cognitive trusts positively influences trusts. This study has theoretical implications as follows. 1) it expands the scope of service characteristics research field to the hotel service area, 2) sub-components of relationship quality, satisfaction and trust, are measured by multidimensional method as cognitive and affective perspective, 3) influencing effects between satisfaction and trust was respectively examined as cognitive and affective dimensions. Two practical implications are provided: first, specific programs to strengthen the employee``s competence ability is needed, and second, to satisfy emotional needs of the hotel guest, improving employee``s internal satisfaction should be preceded.
김봉철(Bong-Chul Kim) 한국기업법학회 2018 企業法硏究 Vol.32 No.1
현대 경제사회에서 사회적기업에 대한 관심이 많아졌고, 이에 따른 법제도의 개선도 이루어지고 있다. 영국과 이탈리아의 사회적기업에 관한 법규들은 이러한 상황을 잘 반영하고 있다. 사회적기업에 관한 새로운 제도들은 기존의 법질서에 고민을 가져오는데, 다양한 기업모델을 사회적기업에 적용하면서 정부의 지원이나 일반 기업과의 차별성을 어떻게 처리할 것인가는 여전히 숙제이다. 사회적기업의 끊임없는 진화를 위해서는 이 숙제를 빠르게 해결해주어야 한다. 한국은 2007년 제정된 사회적기업 육성법으로 사회적기업을 지원하는 법적 기초를 마련하였다. 한국의 사회적기업법 모델은 공공성이 강조되는 유럽형과 유사하지만, 최근까지 많은 개정에도 불구하고 완전하다고 평가하기는 어렵다. 특히 사회적기업에 대한 특별한 취급은 일반적인 기업법의 원칙을 존중하면서 명확한 기준을 바탕으로 예외적인 경우에만 인정되어야 한다. 자본주의를 낳으며 기업제도에 관하여 오랜 역사를 자랑하는 영국, 그리고 사회적 협동조합의 전통을 가지는 이탈리아의 사회적기업에 관한 법규들은, 한국형 사회적기업의 발견과 규율에 있어서 다양한 시사점을 제공한다. 특히 기업의 형태로서 구성원들에 대한 이익배분과 재무시스템에 관한 사항은 아직 한국의 사회적기업법이 구체적으로 규제하지 못하는 부분이다. 이러한 시사점들이 한국의 사회적기업법에 그대로 이식되어야 하는 것은 아니지만, 한국의 법정서와 기업법의 원칙 등 한국의 특수성과 국제사회의 흐름까지 함께 고려한다면 유용한 입법제안도 가능할 것이다. Present society of economic has showed an interest to the presence of social enterprise, leading to an improvement of legal institutions. Legislations of social enterprise in UK and Italy are reflection of such circumstance. New institutions have brought concerns to existing legal orders, leaving tasks of how various models of businesses could be applied to the social enterprise and create differentiation vis-a-vis common corporations. This needs to be handled properly for social enterprise to be evolved sustainedly. Korea prepared a legal basement with a law of ‘Social Enterprise Promotion Act or Social Enterprise Act’, which was legislated in 2007. Korean Social Enterprise Act is similar to those of European model in terms of focusing publicness, but maturity level of Korean law is still doubtful in spite of few revisions. Especially special treatment to social enterprise should be recognized in highly exceptional, but well-defined case where principles of corporate law are valued. Legislations of UK, which gave birth to capitalism and touts their year-long history of corporate institutions, and Italy, which has treasured a tradition of corporative union provide various implications to exploration and principles of Korean social enterprises. Surely, it is true that development of their institutions are currently ongoing and so, it could not be a panacea to the distinctiveness of Korea. Therefore, more delicate analysis and legal suggestions are required in consideration of public sentiment toward Korean laws, general principles of corporate law, and stream of international society.
High Efficiency and Precise Speed Controlled SRM of DSP based
김봉철(Bong-Chul Kim),원태현(Tae-Hyun Won),안진우(Jin-Woo Ahn) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
The switched reluctance drive is known to provide good adjustable speed characteristics with high efficiency. However, higher torque ripple and lack of the precise speed control are drawbacks. In the paper, a PLL(Phase Locked Loop) technique is adopted to regulate the dwell angle instantaneously. A PLL control technique in conjunction with dynamic dwell angle control scheme has good speed regulation characteristics. The F240 DSP based control system is used to realize this drive system. Test results show that the system has the ability to achieve good dynamic and precise speed control.
김봉철(Bong-Chul Kim),박기범(Ki-Bum Park),문건우(Gun-Woo Moon),윤명중(Myung-Joong Youn) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
본 논문에서는 DC/DC단의 넓은 입력문제를 해결할 수 있는 새로운 형태의 컨버터를 제안한다. 제안된 DC/DC 컨버터는 출력전압을 조절하기 위해 정류회로 뒤에 하나의 스위치와 하나의 다이오드를 추가하였으며 추가된 스위치의 시비율로 출력 전압을 조절하기 때문에 1차측 스위치의 고정 시비율로 동작시킴으로써 변압기 설계가 쉬워지고 1차 측의 큰 전압 스트레스도 해결된다. 제안된 컨버터의 이론적 해석과 설계 방법이 제시되었으며, 실험을 통해 검증하였다.
고역율형 단상 SRM의 토크리플 저감을 위한 구동회로 설계
김봉철(Bong-Chul Kim),이동희(Dong-Hee Lee),안진우(Jin-Woo Ahn) 전력전자학회 2004 전력전자학술대회 논문집 Vol.- No.-
A novel single-stage power factor corrected (PFC) drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current. The proposed PFC SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as dc source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit will be discussed in depth through the experimental results.