http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fatigue Properties on the Failure Mode of a Dental Implant in a Simulated Body Environment
김민건 대한금속·재료학회 2011 METALS AND MATERIALS International Vol.17 No.5
This study undertook a fatigue test in a simulated body environment that has reflected the conditions (such as the body fluid conditions, the micro-current of cell membranes, and the chewing force) within a living body. First, the study sought to evaluate the fatigue limit under normal conditions and in a simulated body environment, looking into the governing factors of implant fatigue strength through an observation of the fracture mode. In addition, the crack initiation behavior of a tungsten-carbide-coated abutment screw was examined. The fatigue limit of an implant within the simulated body environment decreased by 19 % compared to the limit noted under normal conditions. Several corrosion pits were observed on the abutment screw after the fatigue test in the simulated body environment. For the model used in this study, the implant fracture was mostly governed by the fatigue failure of the abutment screw; accordingly, the influence by the fixture on the fatigue strength of the implant was noted to be low. For the abutment screw coated with tungsten carbide, several times the normal amount of stress was found to be concentrated on the contact part due to the elastic interaction between the coating material and the base material.
김민건 대한기계학회 1991 대한기계학회논문집 Vol.15 No.3
본 연구에서는 이미 크랙전파의 제단계에 있는 평골재의 정유 크랙을 대상으 로, COD를 고정밀도로 측정하는 것을 주된 수단으로하여, 피로한도의 존재유무를 지배 하는 미소크랙의 정유구조를 상세히 밝히고자 한다. 또한 변형시교에 근거한 현상으 로만 알려져온 과소응력효과, coaxing효과를 크랙폐구현상의 관점에서 검토하여, 크랙 정유현상의 본질적인 이해를 얻고자 한다.
室溫時效 및 變形時效가 微小 疲勞크랙의 開口變位에 미치는 影響
김민건 대한기계학회 1995 대한기계학회논문집 Vol.19 No.2
The effects of room temperature and strain aging treatment are discussed on the critical condition for the onset of growth of non-propagating cracks on 0.15% C low carbon steel, with special emphasis on the length of the critical non-propagating crack and on the crack opening displacement(COD) at the crack tip. It is found from the experimental analysis that room temperature and strain aging of a fatigue pre-cracked specimen introduced the closure of a crack tip of the pre-crack and the reduction of crack opening displacement at the wake of crack, together with an improvement in crack growth resistance of the microstructure. This may cause an increase in the endurance limit of the specimen, through the enhancement of effective stress for the onset of growth of the critical non-propagating crack.
김민건,지정근,태원필 대한기계학회 1993 대한기계학회논문집 Vol.17 No.1
A study on the fatigue fracture at electro discharge machined(E.D.M) surface has been made with special emphases on the microstructure variation and the residual stress distribution at the E.D.H heat affected zone. Results obtained are summarized as follows. (1) E.D.M brings about a variation of microstructure in heat affected zone, structures of molten, quenching, tempering are formed in order of formation from E.D.M surface. (2) Residual stress generated by E.D.M reduces the fatigue strength of the material through the influencing fatigue crack initiation and growth. (3) Magnitude of the residual stress existed in a microscopic area is approximately estimated by a COD measurement method which was originally suggested by authors. 본 연구에서는 방전가공면에서의 미시조직의 변화, 잔류응력의 분포등을 주된 연구대상으로 하여, 이들이 피로균열의 발생, 성장거동에 미칠 특이한 영향에 대하여 고찰하고자 한다.
산성안개 환경하에서 Ni-Cr-Mo 강의 피로크랙전파거동
김민건,임용호,김만구,Kim, Min-Geon,Im, Yong-Ho,Kim, Man-Gu 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.7
To examine the effect of acid fog on the corrosion fatigue behavior in structural steel, fatigue tests under acid fog atmosphere were carried out in comparison with distilled water. The corrosive c omponents contained in acid fog pile up the corrosion products on crack face and show a crack branching and crack tip blunting. Therefore, due to these workings crack growth rate was reduced by decreasing the effective stress range in crack tip rather than under distilled water. Also the effect of sulfuric acid, which is the main component of acid fog, and testing speed on fatigue crack growth were examined. It was found that corrosion behavior was remarkably dependent upon pH and Hz rather than components of acid fog. According as pH and testing speed decrease below a specific value, crack growth was accelerated in comparison with distilled water. This reveals that due to liquid having strong acidity and slow speed of test the crack face dissolution was promoted, so crack closure was disturbed in the process of stress descent.
파괴기구의 비교를 통한 질화강과 질화처리한 티타늄의 피로특성
金敏健,李相浩,申東診 대한금속재료학회 2002 대한금속·재료학회지 Vol.40 No.6
Investigations of fatigue failure mechanism have been carried out to study the contrary fatigue properties of nitrided steel and titanium. In the case of nitrided steel, the starting point of fatigue failure is the surface of specimen. The fatigue limit received nitriding treatment is improved by the increase of surface slip resistance. On the other hand, in the case of nitrided titanium, the hardened compound layer formed on surface by nitriding treatment is broken in brittle manner by the concentrated stress located at the boundary between compound layer and matrix grain. Also, the intensity of this concentrated stress is depended on the slip length of matrix grain and the slip length is decided by the grain size. Consequently, in nitrided titanium Hall-Petch relationship between matrix grain size and fatigue limit remarkably appears. Furthermore, as the hardness of this compound layer is very high(Hv>2000), i.e. low toughness, the brittle fracture of it happens in low stress level and directly results in the overall fracture of specimen. By this reason, the fatigue limit is decreased.
김민건 대한기계학회 1988 대한기계학회논문집 Vol.12 No.3
본 연구에서는 상술한 $\boxDr$한계정유길이$\boxUl$를 찾아내는 것을 주요수단으로 하여, 그 전파 하한계응력으로서의 피로한도와의 관계를 정량적으로 검토하고, 미소크랙전파 거동이 미시조직 또는 피로부하이력등에 민감함을 감안하여, 이들 인자가 미소크랙 전 파의 하한계조건에 미치는 영향에 관하여 검토하기로 하였다. Since the propagation of a short fatigue crack is directly related to the large crack which causes the fracture of bulk specimen, the detailed study on the propagation of the short crack is essential to prevent the fatigue fracture. However, a number of recent studies have demonstrated that the short crack can grow at a low applied stress level which are predicted from the threshold condition of large crack. In present study, the threshold condition for the propagation of short fatigue crack is examined with respect to the microstructure and cyclic loading history. Specimens employed in this study were decarburized eutectoid steels which have various decarburized ferrite volume fraction. Rotating bending fatigue test was carried out on these specimens with the special emphasis on the '||'&'||'quot;critical non-propagating crack length.'||'&'||'quot; It is found that the reduction of the endurance limit of their particular microstructures can be due to the increase of the length of critical non-propagating crack, and the quantitative relationship between the threshold stress .DELTA. .sigma. $_{th}$ and the critical non-propagating crack length Lc can be written as .DELTA. .sigma. $_{th}$, Lc=C where m, C is constant. Further experiments were carried out on the effect of pearlitic structure and cyclic loading history on the length of critical non-propagating crack. It is shown that the length of critical non-propagating crack is closely related to both pearlite interlamellar spacing and cyclic loading history.ory. cyclic loading history.
노치응력접근법을 이용한 차량구조재 용접이음부의 피로내구성 해석
김민건,민태국 대한용접접합학회 2004 대한용접·접합학회지 Vol.22 No.2
Fatigue life at seam weldment of thick plate was estimated using the finite element and FEM-FAT(an exclusive fatigue solver). Finite element meshing at toe and root of weldment was based oil Radaj's theory. Also, the results of FE analysis were compared with experimental results in the point of Miner's Rule. The results of FE and FEM-FAT analysis were in accord with experimental results within 60% confidence. This result reveals that above techniques is useful in assessment of seam weldment and to be an alternative method instead of an object experiment.