RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        비부식성 플럭스를 이용한 알루미늄 브레이징용 필러 소재의 저온 성형용 금속 복합 분말 개발

        김대영,장하늘,윤대호,신윤호,김성호,최현주,Kim, Dae-Young,Jang, Ha-Neul,Yoon, Dae-Ho,Shin, Yun-Ho,Kim, Seong-Ho,Choi, Hyun-Joo 한국분말재료학회 (*구 분말야금학회) 2019 한국분말재료학회지 (KPMI) Vol.26 No.1

        In aluminum brazing processes, corrosive flux, which is used in preventing oxidation, is currently raising environmental concerns because it generates many pollutants such as dioxin. The brazing process involving non-corrosive flux is known to encounter difficulties because the melting temperature of the flux is similar to that of the base material. In this study, a new brazing filler material is developed based on aluminum and non-corrosive flux composite powder. To minimize the interference of consolidation aluminum alloy powder by the flux, the flux is intentionally embedded in the aluminum alloy powder using a mechanical milling process. This study demonstrates that the morphology of the composite powder can be varied according to the mixing process, and this significantly affects the relative density and mechanical properties of the final filler samples.

      • SCOPUSKCI등재

        골수섬유증과 관련된 양측 수부의 괴저성 농피증

        김대영,원영호,김성진,이승철,전인기 ( Dae Young Kim,Young Ho Won,Seong Jin Kim,Seung Chul Lee,Inn Ki Chun ) 대한피부과학회 1997 대한피부과학회지 Vol.35 No.4

        Pyoderma gangrenosum is a rare neutrophilic dermatosis manifesting as painful pustules or bullae, which rapidly become necrotic to produce an ulceration. It is often associated with systemic disease, such as inflammatory bowel disease, rheumatoid arthritis, leukemia, but myelofibrosis is reported rarely for its underlying disease. The most common location is the lower extremities, and the pyoderma gangrenosum also occur infrequently on the hand and face. As in our case, bilateral involvement of the hands are rarely reported. We present a case of pyoderma gangrenosum that had developed on both hands in a 66 year old man who had macrocytic,anemia. A bone marrow biopsy revealed proliferation of fibroblasts and a dense reticulin network consistent with myelofibrosis, the association of which is very rare world wide. (Kor J Dermatol 1997;35(4): 809-813)

      • KCI등재
      • KCI등재

        인태아 상경신경절 발육에 관한 전자현미경적 연구

        김대영,김백윤,윤재룡,Kim, Dae-Young,Kim, Baik-Yoon,Yoon, Jae-Rhyong 한국현미경학회 1998 Applied microscopy Vol.28 No.2

        The development of the superior cervical ganglion was studied by electron microscopic method in human fetuses ranging from 40 mm to 260 mm of crown-rump length (10 to 30 weeks of gestational age). At 40 mm fetus, the superior cervical ganglion was composed of clusters of undifferentiated cell, primitive neuroblast, primitive supporting cell, and unmyelinated fibers. At 70mm fetus, the neuroblasts and their processes were ensheated by the bodies or processes of satellite cells. The cytoplasm of the neuroblast contained rough endoplasmic reticulum, mitochondria, Golgi complex, Nissl bodies and dense-cored vesicles. As the neuroblasts grew and differentiated dense-cored vesicles moved away from perikaryal cytoplasm into developing processes. Synaptic contacts between the cholinergic axon and dendrites of postganglionic neuron and a few axosomatic synapses were first observed at 70 mm fetus. At 90 mm fetus the superior cervical ganglion consisted of neuroblasts, satellite cells, granule-containing cells, and unmyelinated nerve fibers. The ganglion cells increased somewhat in numbers and size by 150 mm fetus. Further differentiation resulted in the formation of young ganglion cells, whose cytoplasm was densely filled with cell organelles. During next prenatal stage up to 260 mm fetus, the cytoplasm of the ganglion cells contained except for large pigment granules, all intracytoplasmic structures which were also found in mature superior cervical ganglion. A great number of synaptic contact zones between the cholinergic preganglionic axon and the dendrites of the postganglionic neuron were observed and a few axosomatic synapses were also observed. Two morphological types of the granule-containing cells in the superior cervical ganglion were first identified at 90 mm fetus. Type I granule-containing cell occurred in solitary, whereas type II tended to appeared in clusters near the blood capillaries. Synaptic contacts were first found on the solitary granule-containing cell at 150 mm fetus. Synaptic contacts between the soma of type I granule-containing cells and preganglionic axon termials were observed. In addition, synaptic junctions between the processes of the granule- containing cells and dendrites of postganglionic neuron were also observed from 150 mm fetus onward. In conclusion, superior cervical ganglion cells and granule-containing cells arise from a common undifferentiated cell precursor of neural crest . The granule-containg cells exhibit a local modulatory feedback system in the superior cervical ganglion and nay serve as interneurons between the preganglionic and postganglionic cells.

      • KCI등재

        TBM 디스크 커터의 수명 예측 방법 개발

        김대영,에브라힘,정재훈,이재원,지성현,Kim, Dae-Young,Farrokh, Ebrahim,Jung, Jae-Hoon,Lee, Jae-Won,Jee, Sung-Hyun 한국터널지하공간학회 2017 한국터널지하공간학회논문집 Vol.19 No.3

        암반용 TBM 공사에서 디스크 커터의 마모도 예측은 설계 및 시공 단계에서 정확한 공사비와 공사기간을 추정하는데 중요한 요소이다. 디스크 커터 마모도 예측에 널리 사용되고 있는 방법으로는 CSM 모델, 노르웨이 NTNU 모델, Gehring 모델이 있으며, 이들 모델은 각각 세르샤 시험, NTNU 시험 결과로부터 도출된 디스크 커터의 마모지수와 수명 지수를 활용하고 있다. 세르샤 시험은 금속 핀을 이용하여 일방향으로 마모를 발생 시키기 때문에 광물 입자크기나 암석의 이방성에 따라 결과의 편차가 큰 것으로 조사되었다(SINTEF, 2013). 한편, NTNU 시험의 경우에 시료 성형을 위한 사전 작업이 필요하기 때문에 수행 완료까지 2~3일의 기간이 소요된다. 본 연구에서는 금속 디스크의 회전과 이와 직교되는 방향으로 이동하면서 양방향 마모를 발생시켜 마모시험 결과의 편차를 줄이고, NTNU 시험 대비 별도의 시료성형이 필요 없어 소요 시간을 1~2시간으로 단축할 수 있는 새로운 디스크 커터 마모도 예측시험과 이를 이용한 마모지수를 제안하였다. 제안된 마모 지수는 동일 암석을 이용한 세르샤 시험과 NTNU 시험결과와 비교하여 높은 상관관계를 갖는 것으로 나타났다. 또한 국내 외 TBM 현장의 암석 시편을 이용하여 시험결과와 현장의 실제 디스크 커터 마모량을 비교 검증하였으며, 95%의 높은 결정계수를 확인하였다. NAT 시험은 신속하게 시험 수행이 가능하고, 시험 결과로부터 제안된 마모지수가 높은 신뢰수준을 보이는 것으로 판단되어 향후 활용도가 높을 것으로 기대한다. Wear prediction of TBM disc cutters is a very important issue for hard rock TBMs as number of cutter head intervention. In this regard, some model such as NTNU, Gehring model, CSM models have been used to predict disc cutter wear and intervention interval. There are some deficiencies in these models. This paper developed a new test method for wear prediction for TBM disc cutter and proposed a new abrasion index. In this regard, different abrasivity indices along with their testing methods are explained. A comparative study is performed to develop the predictability of different cutter life evaluation methods and index. The evaluation of the new methods proposed in this paper shows a very good agreement with the actual cutter life and intervention interval length. The proposed tester and index can be easily used to predict the intervention interval length and cutter wear evaluation in both planning and construction stages of a TBM tunneling project.

      • 고주파 영역 자속 스펙트럼 감시에 의한 전동기 고정자 고장예측

        김대영,여영구,이재헌,Kim, Dae-Young,Yeo, Yeong-Koo,Lee, Jae-Heon 한국플랜트학회 2012 플랜트 저널 Vol.8 No.3

        현재 운영 중인 발전소 전동기의 고정자 권선 고장 실제사례를 토대로 전동기에서 발생하는 자속 데이터의 고주파 영역 스펙트럼을 분석함으로써 결함이 있는 전동기와 건전한 전동기의 자속 특성 및 변화추이를 분석하였다. 전동기 자속스펙트럼의 고주파 영역을 분석한 결과 결함이 있는 전동기는 고정자 슬롯 주파수 대비 고정자 슬롯 사이드밴드 주파수의 상대적 크기 비율이 건전한 전동기에 비해 매우 높음을 확인하였다. 또한 결함이 있는 전동기는 시간이 지날수록 고정자 슬롯 주파수 대비 고정자 슬롯 사이드밴드 주파수의 상대적 크기 비율 크기도 더욱 커지는 현상도 확인하였다. 그리고 결함이 있는 전동기의 자속 데이터는 불시 고장 1개월여 전부터 결함 상태를 인식할 수 있는 신호를 나타냄으로써 전동기 고정자 권선 결함에 대한 사전 예측능력이 매우 탁월함을 확인하였다. In this study, the way how we can find the defects of motor windings in advance will be discussed. The magnetic flux spectrum in the high frequency region of the large motor was analyzed based on the actual fault practices related with motor windings. In case of defective motor relative amplitude ratio of the stator slot frequency to its sideband was very high compared to that of healthy motor. And the defective signal related with motor windings was indicated in advance in the magnetic flux spectrum prior to over 1 month before failure. Considering this aspect it can be estimated that magnetic flux spectrum in the high frequency region has the excellent predictive diagnostic capability.

      • KCI등재

        이동성 SCTP 환경에서 종단간 seamless QoS 관리체계 설계 및 평가

        김대영,안병호,조국현,Kim, Dae-Young,Ahn, Byung-Ho,Cho, Kuk-Hyun 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.10B

        Recently, the qualities of the call and QoS of data service in mobile wireless IP networks inclusive of internet wired networks are very challenging issues. IntServ, DiffServ and MPLS model for supporting QoS in wired networks are representative models which are investigated generally up to now. While, MIPv4(Mobile IPv4) and MIPv6 are proposed to support mobility management for mobile wireless internet networks. But, MIPv4 and MIPv6 based UDP and TCP/IP protocol have many issues to be solved like efficient QoS and frequent handover management. In this paper, we propose a efficient management platform to support seamless data services and end-to-end QoS management in IP-based wireless mobility environments using transport layer protocol, SCTP which support multi-homing and multi-streaming. We used SCTP protocol and IntServ technology for end-to-end communications to support multi-homing and seamless QoS management in the IP-based mobile wireless networks. 최근 인터넷 유선망 뿐 아니라 무선 IP 이동 망에서의 통화 품질 및 서비스 품질(QoS)의 지원 및 관리체계는 매우 중요한 문제로 대두되고 있다. 지금까지 연구된 인터넷 망의 QoS 제공 모델들은 통합서비스(IntServ) 모델, 차등서비스(DiffServ)모델 및 MPLS 등이 대표적이다. 한편, 무선 인터넷 망의 이동성 관리를 위해서 IETF에서는 MIPv4(Mobile IPv4)와 MIPv6 권고안들을 제안하고 있다. 그러나, 이들은 TCP 및 UDP/IP 환경을 근간으로 하여 QoS를 관리하고 이동성의 핸드오버(handover)등을 관리하기 위한 체계들로 많은 중요한 문제들을 야기하고 있다. 본 논문에서는 멀티홈잉와 멀티 스트리밍 기능을 제공하는 전송계층 프로토콜로 설계된 SCTP(Stream Control Transport Protocol)을 이용하여 IP 이동 환경에서 끊김없는(seamless) 서비스 품질을 제공할 수 있는 관리구조(mSCTP)를 언급하고, 이 환경에서의 종단간 QoS 관리체계를 제안한다. 이를 위해서 본 논문에서는 종단간 통신은 SCTP의 멀티홈잉 기능을 이용하고, 이를 통합서비스 모델과 결합하여 IP 이동성환경에서 끊김 없는 QoS 관리 서비스 목적을 달성할 수 있도록 설계하고 이를 평가한다.

      • KCI등재

        방추세포성 횡문근육종으로 진단된 성대 내 섬유성 종물 1예

        김대영,황준하,박인서,임재열,Kim, Dae Young,Hwang, Jun-Ha,Park, In Suh,Lim, Jae-Yol 대한후두음성언어의학회 2016 대한후두음성언어의학회지 Vol.27 No.2

        Rhabdomyosarcoma is an uncommon type of soft tissue malignant neoplasm characterized by undifferentiated mesodermal tissue. Sarcomas account for approximately 1% of all laryngeal neoplasm and rhabdomyosarcomas are the rarest sarcoma found in the larynx. When the sarcoma involves the larynx, radical surgery such as laryngectomy has been considered. With recent advances of combined therapy, however, it can be treated by conservative surgeries followed by postoperative radiotherapy and/or pulse chemotherapy. With reviews of literature, we report a 47-year-old patient complaining of husky voice and throat discomfort who was finally diagnosed as rhabdomyosarcoma of the vocal fold and successfully treated by laser cordectomy followed by adjuvant chemoradiotherapy.

      • HD-270 MLC의 소개 및 유용성평가

        김대영,김원택,이화중,이강혁,Kim Dae Young,Kim Won Taek,Lee Hwa Jung,Lee Kang Hyeok 대한방사선치료학회 2003 大韓放射線治療技術學會誌 Vol.15 No.1

        I. 목적 MLC의 단점인 조사영역경계의 요동현상이나, 반음영의 크기를 감소시킬 수 있는 HD270 MLC에 관한 소개와 유용성에 대해 평가하였다. II 대상 및 방법 HD-270 MLC는 PRIMUS(Siemens)의 치료테이블(ZXT) 과 다엽콜리메이터(3D MLC)를 leafs면에 수직방향으로 이동시킴으로써 유효반음영과 조사영역 경계의 요동을 감소시킨다. HD-270 MLC의 효율성과 적당한 resolution을 결정하기 위해 field edge angle(Y축과 이루는 각)이 0도에서 75도까지 15도의 간격으로 된 다각형의 field를 만들고 resolution은 5mm, 3mm, 2mm로 각각의 HD-270 group을 만들어 Siemens사 선형가속기(PRIMUS)의 6MV 광자선을 사용하여 solid phantom에서 SAD 100cm, depth 1.5cm으로 X-Omat film(Kodak)에 60MU로 조사하였다. 조사된 film은 Lumiscan75(LUMISYS)로 스캔해서 RIT113(Radiological Imaging Technology Inc. USA)으로 분석하여 유효반음영과 조사영역 경계의 요동의 변화를 측정하였다. 그리고 치료테이블 움직임의 정확성을 테스트하기 위해 테이블 위에 50Kg의 인체모형팬텀을 놓고 0.001inch의 정밀도를 가진 dial gauge로 가로, 세로, 수직의 세 직각방향으로 ${\pm}5mm,\;{\pm}4mm,\;{\pm}3mm,\;{\pm}2mm$단계별로 측정하였다 III. 결과 Resolution과 field edge angle이 증가할수록 유효반음영과 조사영역 경계의 요동현상은 증가하였다. 그리고 지멘스 ZXT 치료테이블움직임의 오차범위는 ${\pm}1mm$ 이내로 양호하였다. IV. 결론 최근 많이 사용되어지고 있는 다엽콜리메이터의 문제점들을 보완 할 수 있는 HD-270 MLC를 사용함으로써 MLC의 임상적용범위를 보다 넓힐 수 있을 것이다. I. Purpose The multileaf collimator(MLC) has many advantages, but use of the MLC increased effective penumbra and isodose undulation in dose distribution compared with that of an alloy block. In this work, we introduced the HD-270 MLC, which can improve the above disadvantages of MLC, and reported its feasibility study. II. Method and Materials The HD-270 MLC is a technique which combines the use of the existing Siemens multileaf collimator(3D MLC) with patient translation perpendicular to the leaf plane. The technique produces a smoothed isodose distribution with the reduced isodose undulation and effective penumbra. To assess the efficacy of the HD-270 technique and determine the appropriate resolution, a polygonal shaped MLC field was made to produce field edge angles from 0 degree to 75 degree with a step of 15 degree. Each HD-270 group was generated according to the allowed resolution, i. e., 5, 3, and 2mm. The experiment was carried out on Primus, a Siemens linear accelerator configured with HD-270 MLC. The total 60 MU of 6 MV photon beam was delivered to X-Omat film(Kodak, USA) at a SAD of 100 cm and 1.5 cm depth in solid water phantom. Exposed films were scanned by Lumiscan75(LUMISYS) and analyzed using RIT113 software(Radiological Imaging Technology Inc., USA). To test the mechanical accuracy of table movement, the transverse, longitudinal, and vertical positions were controlled by a consol with ${\pm}5\;mm,\;{\pm}4\;mm,\;{\pm}3\;mm,\;and\;{\pm}2\;mm$ steps, and then measured using a dial gauge with an accuracy of 0.001 inch. During the experiments, the table loaded with about 50Kg human phantom to simulate the real treatment situation. III. Results The effective penumbra and isodose undulation became larger with increase the resolution and field edge angle. The accuracy of the table movement on each direction is good within the ${\pm}1\;mm$. IV. Conclusion Clinical use of the MLC can be increased by using of the HD-270 MLC which complements to the disadvantages of the MLC.

      • KCI등재

        주 조절점 핸들링이 편마비 환자의 한발서기 자세적응에 미치는 영향 - 보바스의 신경발달치료 중심 -

        김대영,Kim, Dae-Young 대한물리치료과학회 2001 대한물리치료과학회지 Vol.8 No.2

        This study is aimed at diagnosing transmutation aspect with the respective of hemiplegia patient's static adaptation of posture which is influenced by anti-gravity excercise, center of gravity shifting movement and segmental movement adaption of the legs and arms by key-point control in the process of Bobatli's treatment approach. The patients for the investigation of this study were selected as a total 17 patients who were doing the physical-therapy in Tae-gu Rehabilitation Center, and diagnosed as hemiplegia patients by Rehabilitation Medicine department in Kyung-buk University hospital. And also, there investigated into temporal transition that keep the attitude with one-leg standing on the ground concerning static attitude adaption on the basis of the before of anti-gravity movement and the after of 4-weeks movement. The findings of this study were as follows: With the respective the time to keep standing pose by one-leg at static attitude transmutation, affected side showed meaningful differences as a l.86/sec, 2.62/sec at 4 weeks later considering the before and after of this experiment.(p<0.01), non-affected side at the aspect of attitude keeping time, but there didn't showed meaningful differences statistically.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼