http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김기영,이동복,Kim, Gi-Young,Lee, Dong-Bok 한국재료학회 2001 한국재료학회지 Vol.11 No.1
Fe-28%Al($Fe_3Al$)과 Fe-28%Al-4%Cr($Fe_3Al-4Cr$) 금속간화합물을 대기중 1073, 1273, 1473k의 온도에서 최고 17일까지 장시간 산화시켰다. $Fe_3Al-4Cr$의 산화저항은 근본적으로 $Fe_3Al$과 거의 비슷하거나, 약간 우수하였다. $Fe_3Al$ 위에 형성된 산화물은 거의 순수한 ${\alpha}-AL_2O_3$로만 구성되어 있었으며, $Fe_3Al-4Cr$ 위에 형성된 산화물은 약간의 Fe와 Cr 이온이 고용된 ${\alpha}-AL_2O_3$로 구성되어 있었다. 외부산화막을 형성하기 위해 모재원소의 외부확산에 의해 산화물-모재 계면에는 Kirkendall 기공이 존재하였다. $Fe_3Al(-4Cr)$ 표면에 형성된 산화막은 1273k가지는 비교적 얇고 치밀하였으나, 1473k에서 산화막의 박리와 함께 상대적으로 큰 무게증가가 발생하였다. Intermetallics of Fe-28%Al($Fe_3Al$) and Fe-28%Al-4%Cr($Fe_3Al-4Cr$) were oxidized at 1073, 1273 and 1473k in air for up to 17 days. The oxidation resistance of$Fe_3Al-4Cr$ was basically similar to or better than that of $Fe_3Al$. The oxide scales formed on $Fe_3Al$ consisted essentially of pure ${\alpha}-AL_2O_3$, while those formed on $Fe_3Al-4Cr$ consisted of ${\alpha}-AL_2O_3$ having dissolved iron and chromium ions. The preferential outward diffusion of substrate elements to form the outer oxide layer led to the formation of Kirkendall voids at the oxide-matrix interface. The scales formed on $Fe_3Al(-4Cr)$ were thin and dense up to 1273K, but they spalled easily at 1473K, accompanied by more weight gains.
미세술기를 이용한 정계정맥류절제술이 정자 핵 내 DNA Integrity에 미치는 효과
김기영,이재석,지희준,김종현,Kim, Gi-Young,Lee, Jae-Seok,Chi, Hee-Jun,Kim, Jong-Hyun 대한생식의학회 2010 Clinical and Experimental Reproductive Medicine Vol.37 No.3
목 적: 인간 정자 핵 내의 DNA integrity는 배아의 발달 및 임신 유지에 중요한 역할을 하여 DNA integrity가 손상된 경우 불임과 유산의 원인이 된다고 하며, 정계정맥류는 DNA 손상을 일으키는 대표적인 원인 중 하나이다. 본 연구에서는 미세술기를 이용한 정계정맥류절제술로 정계정맥류를 교정을 하였을 때 정자 핵 내 DNA integrity가 어떠한 영향을 받는지에 대하여 알아보았다. 연구방법: 2006년 4월부터 2007년 4월까지 불임을 주소로 미세술기를 이용한 정계정맥류절제술을 받았던 18명의 환자에서 수술 전 후에 정액검사의 다른 지표들과 함께 정자 핵 내 DNA integrity가 어떻게 변화하였는지 조사하였다. 정자 핵 내 DNA integrity를 측정하는 방법으로 comet assay를 시행하였고, comet assay를 통한 DNA 손상 정도는 DNA fragmentation index (DFI)로 나타내었다. 결 과: 수술 후 4개월에 모든 환자에서 재발의 소견은 보이지 않았으며, DNA 손상 정도를 나타내는 평균 DFI는 수술 전에 19.3%, 수술 후에 13.7%로 유의한 변화를 보였다. 수술 전 DFI가 10 이상으로 비정상인 14명의 환자들 중 12명 (85%)에서 개선 소견을 보였으나, 수술 전 DFI가 10 미만인 정상 환자 4명에서는 1명 (25%)만이 개선 소견을 보였다. 수술 후 정자의 밀도, 운동성, 생존성에서 호전 양상을 보였으나 유의한 차이는 없었다. 결 론: 미세술기를 이용한 정계정맥류절제술을 통한 수술적 교정은 정액검사상의 다른 지표의 개선 뿐 아니라, 정자 핵 내 DNA 손상을 감소시킬 수 있다. 이상에서 정계정맥류의 수술적 교정으로 정자 핵 내 DNA integrity의 개선을 기대할 수 있으며, 이는 보다 양호한 정자를 많이 얻을 수 있어 자연임신이나 보조 생식술의 성공 가능성을 높일 수 있다는 점을 제시한다. Objective: Human sperm nucleus DNA damage may negatively affect pregnancy outcome, and the spermatozoa of infertile men have more DNA damage than that of fertile men. The aim of this study was to evaluate the effect of microsurgical varicocelectomy on human sperm nucleus DNA integrity. Methods: We reviewed the medical records of 18 subfertile male patients who underwent microsurgical varicocelectomy at our hospital from April 2006 to April 2007. Varicocele was diagnosed by physical examination and Doppler ultrasound. Standard semen analysis was performed in 18 patients before and 4 months after microsurgical varicoceletcomy using a computer assisted semen analyzer. Sperm nucleus DNA integrity was assessed by a single-cell gel electrophoresis (comet assay). Results: No recurrence of varicocele was observed after 4 months later. The DNA fragmentation index improved after varicocelectomy compared with pre-operatively (19.3 versus 13.7%, respectively, p<0.05). Semen analysis parameters (total count, concentration, motile sperm, viability, strict morphology) increased after varicocelectomy, but the difference did not reach statistical significance. Conclusion: Our data suggest that microsurgical varicocelectomy can improve semen analysis parameters and human sperm nucleus DNA integrity in infertile men with varicocele.
필수성능 분석을 통한 효율적인 의료기기 기능안전 접근 방안
김기영(Gi-Young Kim),유기훈(Ki-Hoon Yoo),박호준(Ho-Joon Park),장중순(Joong-Soon Jang) 한국신뢰성학회 2015 신뢰성응용연구 Vol.15 No.1
Functional safety is part of the overall safety relating to the equipment under control (EUC) and the EUC control system that depends on the correct functioning of the electrical/electronic/programmable electronic (E/E/PE) safety-related systems. Since the complexity of the medical equipment is increased, manufactures have to obtain functional safety as well as basic safety. This study proposes a perspective for applying functional safety to medical equipment. The research is carried out with respect to overall safety life-cycle of functional safety and essential performance of the medical equipment. The relationship between functional safety and essential performance is identified centered on the safety function. The essential performance using E/E/PE systems is defined as a safety function of functional safety. This approach is applied to a ultrasound imaging system as a case study.
김기영(Gi-Young Kim),지성호(Sung-Ho Ji),강민관(Min-Kwan Kang),김동은(Dong-Eun Kim),오용민(Yong-Min Oh),노대석(Dae-Seok Rho) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
현재, 경기도 화성의 K 연료전지발전소는 58[MW]의 전력을 생산하는 대용량 연료전지발전시스템으 로서, 154/13.8[kV] 계통에 연계되어 운용되고 있다. 그러나 보호기기의 오동작 현상 및 제어카드소손 등의 문제점으로 인하여, 발전계획 차질에 의한 막대한 금전적 손실과 유지보수비용에 대한 대책이 시 급한 실정이다. 따라서, 본 논문에서는 대용량 연료전지의 운용상 문제점들을 분석하고, 현장시험을 수 행하여 대용량 연료전지발전시스템의 안정적 운용방안을 제시하였다.
김기영(Gi-young Kim),고병각(Byeong-gak Ko),장중순(Joong Soon Jang),천성일(Sung-il Chan) 한국신뢰성학회 2010 신뢰성응용연구 Vol.10 No.2
Functional safety is the part of the overall safety of a system that depends on the system or equipment operating correctly in response to its inputs, including the safe management of likely operator errors, hardware failures, systematic failures, and environmental changes. One of the essential concepts of functional safety is Safety Integrity Level(SIL). It is defined as a relative level of risk-reduction provided by a safety function, or to specify a target level of risk reduction. In this paper, each element of SIL assessment will be defined. Based on each element, specific process of SIL selection will be established by using flowchart. The flowchart provides a SIL assessment guideline for functional safety engineers. The proposed theory will be verified by applying to a oil refining plant for SIL assessment.