http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선진시추장비와 시추공벽 영상화 장비를 이용한 TBM 전방 지반평가시스템 개발
김기석,김종훈,정래철,이인모,조계춘,Kim, Ki-Seog,Kim, Jong-Hoon,Jeong, Lae-Chul,Lee, In-Mo,Cho, Gye-Chun 한국터널지하공간학회 2015 한국터널지하공간학회논문집 Vol.17 No.3
TBM 터널을 건설하는 동안 효율적이고 안전한 작업을 위하여 굴착 암반의 정확한 정보를 획득하는 것은 매우 중요하다. 이 연구에서는 터널 막장 전방의 암반 상태를 예측하기 위하여 선진시추장비와 시추공벽 영상화 장비를 이용한 TBM 전방 지반평가시스템을 개발하였다. TBM 전방 지반평가시스템은 선진시추장비와 시추공벽 영상화 장비, 분석 소프트웨어로 구성된다. 선진시추장비는 논코어링과 코어링 방법이 모두 적용 가능하도록 개발되었다. 또한 굴진 시 획득되는 피드압, 회전압, 회전수, 굴진속도 등의 천공영향 변수를 획득할 수 있다. 천공지수는 코어RMR과의 상관성분석을 통해 천공지수RMR로 환산된다. 개발된 시스템은 비탈면, 터널 현장에서 현장적용을 진행하였다. 현장 적용 결과 논코어링 방법은 코어링 방법에 비해 4배가량 빠른 굴진이 가능한 것으로 확인되었고, 천공지수RMR과 코어RMR은 유사한 분포를 나타내었다. TBM 전방 지반평가시스템은 신속한 지반예측이 가능하므로 공기지연을 최소화할 수 있는 막장 전방 예측 기술로의 활용이 기대된다. In the construction of a TBM tunnel, it is very important to acquire accurate information of the excavated rock mass for an efficient and safe work. In this study, we developed the prediction system of TBM tunnel face ahead using probe drilling equipment and drilled hole imaging equipment to predict rock mass conditions of the tunnel face ahead. The prediction system consists of the probe drilling equipment, drilled hole imaging equipment and analysis software. The probe drilling equipment has been developed to be applicable to both non-coring and coring. Also the probe drilling equipment can obtain the drilling parameters such as feed pressure, torque pressure, rotation speed, drilling speed and so on. The drilling index is converted to the drilling index RMR through the correlation between a drilling index and core RMR. The developed system verification was carried out through a slope and tunnel field application. From the field application result, the non-coring is four times faster than a coring and the drilling index RMR and core RMR are similar in the distribution range. This system is expected to predict the rock mass conditions of the TBM tunnel face ahead very quickly and efficiently.
한우의 혈장 및 조직중의 lactate dehydrogenase의 활성치와 isoenzyme의 분포
김기석,조종후,Kim, Ki-seog,Cho, Jong-hoo 대한수의학회 1989 大韓獸醫學會誌 Vol.29 No.4
The activity of lactate dehydrogenase in plasma and various tissues(skeletal muscle, cardiac muscle, liver, lung, kidney and spleen) of Korean native cattle in a Chonju abattoir, the Breeding Stock Farm and Animal Farm of Chonbuk University was determined by using ultra violet method. Using polyacrylamide gel electrophoresis, the lactate dehydrogenase isoenzyme distrimution of plasma and various tissues in Korean native cattle was studied. The plasma lactate dehydrogenase activity of Korean native cattle was $554.80{\pm}92.70IU/l$ and the lactate dehydrogenase activity of male plasma was $543.96{\pm}97.89IU/l$, which was lower than that of female plasma, $579.19{\pm}78.09IU/l$. The plasma lactate dehydrogenase activity of calf was $557.31{\pm}110.27IU/l$ and was no significantly different from that of adult Korean native cattle. But the range of calf lactate dehydrogenase activity was larger than that of adult Korean native cattle. In tissues, the lactate dehydrogenase activity was decreased in order of lung, kidney, spleen, liver, heart and skeletal muscle. The lung had the greatest activity and the skeletal muscle had the least. Lactate dehydrogenase isoenzymes in plasma and tissues were found to have a characteristic distribution and quantitative isoenzyme patterns. In plasma, the LDH1 usually had the greatest activity and other isoenzymes showed a decreasing tendency in order of LDH2, LDH3, LDH4 and LDH5. The distribution of lactate dehydrogenase isoenzymes had a wide variation in tissues. But the distribution of LDH isoenzymes in plasma was similar to that in kidney, and also cardiac muscle and spleen had similar pattern in LDH isoenzymes distribution.
표면 분석용 Coaxial Impact Collision Ion Scattering Spectroscopy (CAICISS) 장치의 제작과 특성
김기석(Ki-Seog Kim),김용욱(Yong-Wook Kim),박노길(No-Gill Park),정광호(Kwang-Ho Jeong),황정남(Chung-Nam Whang),김성수(Sung-Soo Kim),윤희중(Hee-Jung Yun),최대선(Dae-Sun Choi) 한국진공학회(ASCT) 1994 Applied Science and Convergence Technology Vol.3 No.1
표면 분석용 CAICISS 장치를 제작하고, He^+과 Li^+이온을 사용하여 장치의 특성을 조사하였다. 장치 분해능의 평가기준으로 이용할 수 있는 △T를 정의하고 Li^+ 이온을 사용했을 경우와 비교한 결과, He^+ 이온의 경우 △T/T=0.034, Li^+ 이온의 경우 △T/T=0.04로서, Li^+ 이온의 경우가 분해능이 약간 떨어짐을 알았다. 그리고 Ta, Al 표적시료에 대한 실험결과를 보정함수를 이용하여 계산값과 비교한 결과 잘 일치함을 확인하였고, 보정함수는 입사이온의 에너지와 표적원자의 질량에는 무관하고, 실험조건에만 의존함을 알았다. 또한 Si(100) 표면에 He^+ 이온을 입사하여 입사각에 따른 산란강도 분포 스펙트럼으로부터 CAICISS 장치로 표면 1~4 원자층의 Si 원자에 대한 기하학적인 배열을 확인하였다. CAICISS system for surface analysis is constructed, and characteristics of our system are investigated using He^+ ion and Li^+ ion. We defined the △T which can be used to estimate the resolution of this system, and compared the value for the case using He^+ and that using Li^+. As a result, the △T/T is 0.034 and 0.04 for He^+ and Li^+, respectively. We also confirmed that the results of experiment for Ta, Al target atom agree well with these calculated values using a correction function, and the correction function is found to be independent of the energy of incident ion and the mass of target atom, but dependent of the experimental conditions. And we investigated the geometric structure of Si atoms from the angular scan curve for the Si(100) surface.
한계상태설계법 지반정수 산정을 위한 풍화대 강도특성 측정장치의 개발 및 현장적용에 관한 연구
김기석(Ki Seog Kim),김종훈(Jong Hoon Kim),최성웅(Sung-oong Choi) 한국암반공학회 2020 터널과지하공간 Vol.30 No.2
지반구조물에 대한 한계상태설계법의 적용에 있어서 단위중량, 포아송비, 변형계수, 점착력 및 내부마찰각 등은 설계의 정확성 및 신뢰도 향상에 매우 큰 영향을 미치는 지반특성값이다. 특히 풍화토 및 풍화암 등 풍화대에 지반구조물이 위치하게 될 경우 이들 지반특성값 중에서도 점착력과 내부마찰각이 구조물과 지반의 하중 및 저항계수를 판정하는데 매우 높은 연관성이 있으며 따라서 공내전단시험과 같은 현장시험으로부터 구해지는 이들 지반정수의 정확한 산정은 지반구조물의 최적설계를 좌우하는 중요한 요소이다. 본 연구에서는 국내 38개 시공사례 분석을 통해 이들 지반정수들의 설계적용 사례를 검토, 현장시험의 중요성을 확인하였으며 이를 토대로 ASTM에서 규정하는 모든 표준절차를 반영하는 새로운 풍화대 강도특성 측정장치를 개발하였다. 또한 본 장비의 현장적용을 통해 시험장비 및 시험자의 주관적 오류에 의한 오차발생 가능성을 최소화한 장비의 개선성능을 확인하였으며, 이를 토대로 한계상태설계법의 적용 시 핵심 지반특성값의 정량적 산정을 위한 기틀을 마련하였다. Applying the limit state design method to geotechnical structures, accuracy and reliability of its design are mainly affected by parameters for geotechnical site characteristics, such as unit weight, Poisson’s ratio, deformation modulus, cohesion and frictional angle. When the structures are located in weathered ground, especially, cohesion and frictional angle of ground are closely related with decision of parameters for structures’ load and ground’s resistance. Therefore, the accurate determination of these parameters, which are commonly obtained from field measurement, such as borehole shear test, are essential for optimum design of geotechnical structures. The 38 case studies, in this study, have been analyzed for understanding the importance of these parameters in designing the ground structures. From these results, importance of field measurement was also ascertained. With these evaluations, an apparatus for determining the strength characteristics, which are fundamental in limit state design (LSD) method, have been newly developed. This apparatus has an improved function as following the ASTM suggestion. Through the field application of this apparatus, the strong point of minimizing the possibility of error occurrence during the measurement has been verified and authors summarized that the essential parameters for LSD can be qualitatively obtained by this apparatus for determination of strength characteristics of weathered ground.
김혜림 ( Hye Lim Kim ),최영진 ( Young Jin Choi ),곽춘종 ( Choon Jong Kwak ),김기석 ( Ki Seog Kim ) 한국경영공학회 2014 한국경영공학회지 Vol.19 No.4
This paper aims at improvement in core competencies of food service providers by using Quality Function Deployment and Fuzzy Set Theory. This research identified customer requirements through customer surveys and monitoring customer feedback and determined service characteristics by expert interviews for the quality function deployment. In addition, the fuzzy set theory was applied to transforming vague and subjective customer requirements into clear and objective numerical values. The top management and managers of food service providers can identify the priorities for improvement in service characteristics, on which they can focus.
조인기 ( In Ky Cho ),김기석 ( Ki Seog Kim ),이근수 ( Keun Soo Lee ) 한국지구물리·물리탐사학회 2015 지구물리와 물리탐사 Vol.18 No.1
3차원 전기비저항 탐사법은 지하 전기비저항의 3차원적 분포 영상을 제공해 주므로 매우 효과적인 지반조사 방법 중의 하나이다. 본 연구에서는 붕락이 발생한 터널에 대하여 3차원 전기비저항 탐사를 수행하여 붕락의 원인으로 보이는 터널 주변의 파쇄대 및 석탄층의 발달 상황을 파악하고자 하였다. 이를 위하여 터널에 평행한 5개의 측선과, 수직한 11개의 측선에 대하여 2차원 전기비저항 탐사를 수행하고, 이들 자료를 통합하여 3차원 역산을 수행하였다. 역산 결과 얻어진 3차원 역산결과와 시추 자료를 종합하여 터널 붕락의 원인으로 해석되는 단층 파쇄대 및 탄층의 3차원적 분포 양상을 제시하였다. Three-dimensional (3D) resistivity method is an effective tool in the engineering site survey because it can provide a 3D resistivity distribution of the site. In this study, we tried to find out faults, fractures and coal seams that can cause the collapse of the tunnel. We carried out 2D resistivity survey along 5 parallel lines and 11 cross lines and merged all the apparent resistivity data for 3D inversion. Finally, from the 3D resistivity image and drilling data we presented the 3D distribution of faults, fractures and coal seams that are considered the main cause of the tunnel collapse.