
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
인터넷 쇼핑몰에서의 소비자 구매결정속성에 대한 연구 : 일반상품과 기획상품을 중심으로
To set up the strategy of marketing, the characters of important concerns that customers are willing to purchase some product or commodities must be analyzed and recognized in advance. Therefore, the purpose of this study is to analyze and figure out the factors of important concerns for customers to purchase some product(general product, specified planned product) in the shopping mall through Internet shopping mall directly bargained between company and customers among the electronic market. Based on the previous studies, the selection of the variables of purchasing decision attribute in the Internet shopping mall is largely divided with four categories of concerned variables. In this study the variables of purchasing decision attribute are followed. 1) The physical value of product 2) The theoretical vale of product 3) The capabilities of purchasing execution in the shopping mall 4) The exchange method of product and its payment The results of this study show that customers to use the shopping mall consider in general about importantly all of four categories described above. However, this study determines that the companies to manage the shopping mall couldn't serve satisfactorily customers for 1) and 3) variables. One of the most important attribute for the case of general product is shown by only the exchange method of product and its payment. In contrast, the most important attribute for the case of specified planned product are demonstrated by the theoretical value of product, the exchange method of product and its payment. But for the specified planned product, customers didn't receive yet satisfactorily their service for the exchange method of product and its payment. Therefore, to set up the strategy of marketing in the Internet shopping mall, the versatile methods of exchange product and its payment must be developed and also the better information of importantly concerned attribute for various product(general product, specified planned product) are provided in time. For the other variables of customers' concerns, the company should make lots of efforts support customers with satisfied service.
LSTM Language Modeling for Intrusion Detection Systems
컴퓨터 보안에서 견고한 침입 탐지 시스템을 설계하는 것은 가장 핵심적이고 중요한 문제 중의 하나이다. 본 논문에서는 비정상 기반 호스트 침입 탐지 시스템 설계를 위한 시스템 콜 시퀀스와 분기 시퀀스에 대한 언어 모델 방법을 제안한다. 기존의 방법에서 흔히 발생하는 높은 오탐율 문제를 해결하기 위해 여러 임계값 분류기를 혼합하여 정상적인 시퀀스들을 잘 모을 수 있는 새로운 앙상블 방법을 사용하였다. 본 언어 모델은 기존 방법들이 잘 하지 못했던 각 시스템 콜의 의미와 그들 간의 상호 작용을 학습 할 수 있다는 장점이 있다. 공개된 데이터들과 새롭게 생성한 데이터를 바탕으로 다양한 실험을 통해 제안 된 방법의 타당성과 유효성을 입증하였다. 또한, 본 모델이 높은 이식성을 갖고 있음을 보였다.
전기로 공정 내 화학에너지 증대를 위한 Coke 및 Al-Dross의 용해 거동 및 반응 모델 개발
The reduction of CO2 emission is an important issue for the sustainable production and processing of steel in EAF (Electric Arc Furnace). The way to decrease CO2 emissions can be achieved by reducing the use of electrical energy and by increasing the use of chemical energy. In general, the chemical energy of EAF can be improved by the heats of oxidation reaction and the carbon combustion. However, by adding carbon based materials into the molten steel, the carbon is not dissolved completely and floated to the slag layer due to low density. On the other hand, Al dross is a by-products of Al smelting process and it includes 27 mass% of metallic Al. In general, the oxidation heat of aluminium is three times higher than that of carbon. In the present study, the optimized fuel ratio of Al-dross was investigated by maximum dissolution ratio. After dissolution of fuel with optimized ratio, the temperature changes in molten steel was measured during oxygen blowing and simulated by the coupled reaction model. CO2 배출 감소는 EAF에서 철강의 지속 가능한 생간 및 가공을 위해 중요한 문제이다. CO2 배출량을 줄이는 방법은 전기에너지의 사용을 줄이고 화학에너지의 사용을 증대시킴으로서 달성할 수 있다. 일반적으로 EAF의 화학에너지는 산화 반응열 및 탄소 연소열에 의해 향상시킬 수 있다. 그러나 용강 내 탄소계 재료를 첨가하면 낮은 밀도와 높은 용융점으로 인해 탄소가 완전히 용해되지 않고 슬래그 층으로 부유하게 된다. 한편, Al-Dross는 알루미늄 제련 공정의 부산물이며, 금속성 알루미늄을 약 23mass% 함유하고 있다. 일반적으로 알루미늄의 산화열은 탄소의 연소열보다 약 3배 높으며, 낮은 용융점으로 비교적 용해가 쉽다. 본 연구에서는 화학에너지의 연료로서 코크스와 Al-Dross를 혼합하여, 다양한 배합비 및 온도에서 용강 내 탄소 및 알루미늄의 용해 농도, 용해 효율 및 용해 속도 상수를 조사하였으며, 최적의 배합비를 도출하였다. 또한 최적화 된 비율로 연료를 용해시킨 후, 산소 취입 중 용강의 온도 변화를 측정하고 Coupled reaction model로 Oxygen blowing Model을 구축했다.
새로운 베타-락탐 抗生物質의 合成과 生物活性에 關한 硏究
김규완 성균관대학교 대학원 1989 국내박사
본 硏究는 좋은 抗菌活性이 期待되는 經口用 베타-락탐 抗生物質들을 開發하기 爲한 것으로서, 새로운 化合物들을 合成하고 그 化合物들의 生物活性을 試驗管內에서 試驗하였다. 6-아미노페니실란酸 및 7-아미노세팔로스포란酸誘導體의 아미노基에 ---經口用에서 그램陽性菌에 對해 强한 活性을 나타내는 ---D(-)-α-페닐글리신類을 아실化 反應시켜 6-[D(-)-α-아미노페닐아세트아미도]페니실린酸 및 7-[D(-)--아미노페닐아세트아미도]세팔로스포란 酸類를 製造하고, 다시 이들의 아미노基에 ---세팔로스포린系에서 그램陰性菌에 對해 强한 抗菌力을 나타내는 ---(Z)-2-알콕시이미노-2-(2-아미노티아졸-4-일) 아세트그룹을 導入하여 6-[D(-)-α-[(Z)-2-알콜시이미노-2-(2-아미노티아졸-4-일) 아세트아미노]페닐아세트아미도]페니실란酸 및 7-[(D)-α-[(Z)-2-알콕시이미노-2-(2-아미노티아졸-4-일)아세트아미노]페닐아세트아미도]세팔로스포란酸類의 新規化合物들을 合成하였다. 또 이 (Z)-2-알콕시이미노-2-(2-아미노티아졸-4-일)아세트酸의 티아졸環을 피리딘, 피리미딘 및 피롤環 等으로 變化시킨 化合物들을 合成하고 이 誘導體를 7-아미노세팔로스포란酸誘導體와 아실化 反應시켜 새로운 物質의 合成을 試圖하였다. 그러나 이들은 아직까지 目的化合物을 얻지 못하였으나 繼續 硏究中에 있다. 이들 合成된 24個의 新規合成物들의 抗菌活性을 試驗管內에서 試驗하였다. 그 結果, 大部分 좋은 抗菌活性을 나타냈으며 一部는 그램陽性菌에 對하여, 一部는 그램陰性菌에 對하여 旣存의 比較 抗生物質보다 優秀하였다. 特히 7-[D(-)-α-{(Z)-2-(2-아미노티아졸-4-일)-2-메톡시이미노아세트아미도}(p-히드록시페닐)아세트아미도]-3-[(1-메틸-1H-테트라졸-5-일)티오메틸]-3-세펨-4-카르복시酸(K11)은 Sa. lutea, B. subtilis에 强한 抗菌力을 나타내었다. To develope oral antibiotics having good antibacterial activity, several new β-lactam antibiotic compounds were synthesized and their antibacterial activities were tested in vitro. 6-[D(-)-α-Aminophenylacetamido]penicillanic and 7-[D(-)-α-aminophenylacetamido]cephalosporanic acid derivatives were prepared by acylation of the amino group of 6-APA and 7-ACA derivatives with D(-)-α-phenylglycine and [D(-)-α-(p-hydroxyphenyl)]glycine, which consist of the oral antibiotics having the strong activity against Gram-positive bacteria. In further pursuit, new compounds of 6-[D(-)-α-[(Z)-2-alkoxyimino-2-(2-aminothiazol-4-yl)acetamido]phenylacetamido] penicillanic and 7-[D(-)-α-[(Z)-2-alkoxyimino-2-(2-aminothiazol-4-yl)acetamido]phenylacetamido]cephalosporanic acid derivatives were synthesized by introducing (Z)-2-alkoxyimino-2-(2-aminothizol-4-yl) acetyl group--constituent which represents the potent antibacterial activity against Gram-negative bacteria among the cephalosporin antibiotics--into the amino group of the above compounds. It was also attempted to synthesize another new β-lactams having pyrrole, pyridine and pyrimidine ring in place of thiazole ring of (Z)-2-alkoxyimino-2-(2-aminothiazol-4-yl)acetyl group, but the compounds were not obtained yet. The antibacterial activities of new 24 compounds were tested in vitro. As the results, most of them showed a good activity. Especially, 7-[D(-)-α-[(Z)-2-(2-aminothiazol-4-yl)-2-methoxyiminoacetamido](p-hydroxyphenyl)acetamido]-3-[(1-methyl-1H-tetrazol-5-yl)thiomethyl]-3-cephem-4-carboxylic acid(K11) was very active in vitro against strains of Sa. lutea and B. subtilis.
김규완 연세대학교 산업대학원 2001 국내석사
1970년대의 에너지 위기는 건물의 에너지 소비량을 절감시키고, 효율적 공조설비 방식이 개발되도록 자극했다. 최근의 사무소 건축물은 대형화 및 고층화의 추세가 가속화되어가고 있다. 이러한 고층 및 대형화 사무소 건물에서는 부하대응이 빠르고 개별공조가 가능한 변풍량 시스템이 일반적으로 적용되고 있는 실정이다.//////본 연구에서는 국내의 사무소빌딩을 선정하여 정밀시뮬레이션 프로그램인 DOE 2.1E를 사용하여, 변풍량시스템과 정풍량시스템을 각각 적용하여 에너지 소비효율성을 파악하고 경제성을 평가하였다. 변풍량시스템과 정풍량시스템이 설비된 사례 건물의 각 에너지 소비량을 분석하여 보았다. 여기에서 나온 검토 내용은 변풍량 시스템이 정풍량방식에 비하여 에너지 소비에 있어서 효율적으로 운전되고 있지 않았다. 이러한 문제점을 좀더 분석하고 파악하기 위하여 변풍량시스템이 적용된 30개 빌딩을 추가하여 조사하였으며 조사된 내용을 분석하여 보면 설계적, 시공적, 유지관리적인 사항으로 분류할 수 있으며 이 세가지 사항이 복합적으로 작용하여 변풍량 시스템이 원래 목적대로 에너지 절약적 운전이 되지 않고 있음을 알 수 있었다.//////이 세 가지 사항의 문제점을 분석하고 그에 대한 개선방안을 강구하였다. 따라서 본 연구의 결론은 다음과 같다.///설계적인 사항///■ 부하변동에 대응하는 실내 압력의 불균형과 이에 관련한 외기 도입량 부족에 기인한 실내 환경 악화의 개선 방안으로서는 투자비가 적게드는 플리넘 압력제어 방식을 채택하고 외기 도입구 에는 IAQ 댐퍼 유니트를 별도 설치하는 방안을 설계에 반영토록 한다.///■ 변풍량 시스템에서의 난방 방식 채
김규완 Friedrich-Schiller-Universitat Jena 2000 해외박사
도급계약의 일방당사자인 수급인이 주된 급부의무로 부담하고 있는 일완성의무(제 631 조)를 채무의 내용에 좇아 이행하지 않은 경우에 대한 독일 민법의 법정책임체계를 보다 정확히 이해하고자 함이 논문의 목적이다. 독일민법은 제 633 조 1 항에서 "하자 없는 일완성"을 수급인의 주된 급부의무의 본질적 내용으로 명시하고 있기 때문에 도급계약법에서도 매매계약법에서와 마찬가지로 수급인이 "전혀 잘못된" 일완성을 한 경우(이종물異種物의 급부 = 채무의 불이행)와 채무를 이행하기는 하였으나 그저 하자만 있는 일완성(하자 있는 목적물의 급부 = 채무의 불완전이행)을 한 경우로 준별하여 전자는 채권총칙 편의 일반 급부장애법(주로 제 320 조 이하)의, 후자는 채권각칙 편의 특별 급부장애법, 즉 하자담보책임규정(제 633 조 2 항 이하)의 적용대상이 된다고 하는 지금까지의 판례와 학설의 이분법적 사고에 따른 여러 문제점이 논문을 비판적으로 구성하는 계기가 된다. 지금까지의 접근방법이 민법전의 편집수순 및 계약법이론의 발전상황에서 우위를 점하고 있는 매매계약법에 그 사고의 출발점부터가 무비판적으로 종속된 결과임을 논증·비판하면서 논문에서는 도급계약 및 그 관계법규와 매매계약 및 그 관계법규의 본질적 차이점들을 부각시키는 한편, 일반 급부장애법에서 분명히 표현된 입법자의 기본구상은 매매계약법이 아니라 오히려 도급계약법에 그 맥락이 굴절되지 않고 반영되었음을 규명하였다. 특히 계약의 타방당사자인 도급인이 하는 "수급인이 변제제공한 목적물의 수령행위" 또한 매도인의 그것과 법률상 차이가 있으며, 이러한 행위가 "수령한 목적물이 채무의 내용에 본질적으로 상응한다는 도급인의 승인내지 용인"이라는 판례와 다수설의 이해가 이 시점이후 "전혀 잘못된" 일완성의 실재를 상정함과는 모순됨도 분명히 하였다. 이러한 반박논거들에 근거하여 도급계약법상의 이른바 하자담보책임규정이 그 적용대상을 제한한 채 일반급부장애법과 병존하는 책임체계가 아니라, 주된 급부의무의 불이행 그 자체가 문제되는 한 이와 전면 중첩되는 특칙으로 이해되어야 한다는 결론에 이르게 된다. 즉, 도급인의 수령행위 이전의 시점에는 두 책임체계를 굳이 구별할 필요가 없으며, 이후의 시점에서는 이들을 구별해서는 안되며 하자담보책임규정의 적용만이 고려될 수 있다.