
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
드릴의 무게와 손목자세의 변화가 작업수행에 미치는 영향
오늘날 우리가 사용하는 수공구의 형태는 점차적으로 수동화 체계에서 기계화, 자동화 체계로 바뀌어 가고 있지만, 아직까지 여러 산업현장에는 수공구가 여전히 사용되고 있는 실정이다. 수공구를 사용하는 작업을 장기간 반복적으로 수행할 경우에 손, 팔, 어깨, 목으로 구성되는 상지의 근육과 섬유조직에 손상을 일으켜 점차적으로 상지의 기능을 저하시키거나 통증을 동반하는 누적 외상질병을 유발할 수 있다. 따라서, 본 연구에서는 수공구의 무게와 작업자세의 변화가 작업자에게 미치는 영향에 관해 연구함으로써 수공구의 적절한 무게와 작업자세를 결정하여 수공구를 사용하는 작업자들의 누적외상병(Cumulative Trauma Disorders; CTDs)예방에 기여하고자 한다. 본 연구는 판금속 드릴링작업시 드릴의 무게변화와 손목자세가 작업자에게 어떤 영향을 주는가에 대해서 연구를 하였다. 먼저 심리육체적인 방법을 사용하여 드릴의 무게와 손목자세가 변화함에 따라서 각각의 수준들의 조합에서 최대허용가능빈도(Maximum Acceptable Frequency; MAF)를 결정하고, 신체의 5개 부위에 대한 통증정도를 분석했다. 또한 각 세션동안의 근전도값을 분석하였다. 실험결과 손목각도와 드릴의 무게가 증가할수록 MAF값이 감소하는 경향을 나타내었다. 특히, 손목각도가 25°이상에서 MAF값이 급격하게 감소했고, 드릴의 무게증가에 따른 영향은 목표점에 가하는 힘이 5.4±0.2㎏으로 고정되어 있는 관계로 1.5㎏에서 일시적으로 MAF값이 증가했다가 2㎏에서 감소하는 형태를 보였다. 신체불편도 조사에서는 손목의 각도가 증가할수록 어깨, 손목, 몸통의 RPE값이 증가하는 경향을 나타내었다. 각 세션의 실험 전과 실험 후의 악력차이에 대한 결과는 손목의 각도가 25° 이상에서 악력의 변화가 크게 나타났으며 드릴의 무게의 경우 1.5㎏에서 악력변화가 가장 작았으며 2㎏에서 크게 증가했다. 다양한 손목각도와 드릴무게에서의 어깨근육과 전완근육의 활동치(EMG)에 대해서 역시 유의한 차이를 나타내지 못했다. 이러한 이유는 접지전극의 부착점이 다소 부정확한 것에서 비롯된 결과라고 추정된다. 따라서, 드릴링작업시 손목각도가 25도를 넘지 말아야 하고 드릴의 무게는 1.5㎏이 적당하다고 판단된다. 그러나, 보다 깊은 연구를 위해서는 목표점에 부하 되는 힘을 한국인에 맞게 조정하고, 드릴의 무게를 좀더 다양하게 선정하여 실험 할 필요가 있으며, 손목의 각도와 드릴의 무게뿐만 아니라 진동과 공구의 디자인에 관한 폭넓은 연구를 할 필요가 있다고 생각된다. It has been noted that manual material handling(particular1y lifting) is a major occupational factor in lower back injuries. Acceptable work limits for lifting tasks were developed successfully through biomechanical, physiological, and psychophysical approaches. However, there have not been many studies to determine acceptable work limits for handwrist work using a psychophysical approach. Proper utilization of the psychophysical approach can provide various ergonomic solutions to reduce the risk of developing Carpal Tunnel Syndrome(CTS). Therefore, the primary focus of this research was to determine safe and acceptable frequencies for certain handwrist tasks which involve potential risks of developing CTS. The secend was to determine safe weight of handtool under the same condition. The objectives of this study were to determine the effects of drill weight and wrist flexion on acceptable frequencies for a sheet metal drilling task which involves potential risks of developing CTD. Two laboratory experiments were conducted; first, to determine the maximum acceptable frequency (MAF) for a simulated sheet metal drilling task at varying weights of drill and angles of wrist flexion using the psychophysical approach. Second, to examine the difference value of grip strength (GS) before and after each session under varying angles of wrist flexion. In the both experiments, the wrist posture(flexation) and the drill weight were required by the task was varied. Five healthy students served as subjects. Results showed that the weight of drill and angle of wrist flexion had significant effect on the MAF. Specially, the MAF was significantly reduced as angle of wrist flexion increased. On the contrary, rating of perceived exertion (RPE) of shoulder, wrist, and body was reduced as angle of wrist flexion. But muscle EMG didn't support the results of MAF. Results of the GS study showed that angle of wrist flexion had significant effect on the grip strength. Thus, the difference value of GS before and after each session was significantly increased at 25" wrist flexion and was the lowest at 1.5㎏ weight of drill.
Structural study on human cytosolic Aspartyl-tRNA synthetase
Human cytosolic aspartyl-tRNA synthetase (DRS)는 단백질의 translation 과정에 관여하는 aminoacyl-tRNA synthetase (aaRS)의 한 요소로써, aspartic acid와 그것을 인식하는 특정 tRNA를 연결하는 효소이다. 또한 DRS는 체내에서 multi-tRNA synthetase complex (MSC)를 이루는 단백질로 알려져 있으며 이들 MSC는 체내에서 aaRS들의 저장소의 역할을 하면서 translation과 non-canonical function을 조절한다고 알려져 있으나 DRS의 non-canonical function은 아직 밝혀지지 않은 실정이다. 본 연구에서는 X선을 이용하여 DRS의 결정으로부터 2.25 Å resolution의 회절자료를 얻어 DRS의 구조를 규명했다. DRS의 결정구조로부터 DRS는 homodimer이며 mitochondrial aspartyl-tRNA synthetase와 비교해 보았을 때, sequence상에서는 22.9%의 낮은 유사성을 띠나 구조적으로는 r.m.s.d. distance가 1.7 Å으로 유사한 것을 밝혔다. 그리고 DRS의 N-terminus 부분에서 N-helix를 유추할 수 있었고 이 구조가 DRS와 tRNAAsp간의 상호작용을 조절할 것으로 예상했다. 또한 post-translational modification (PTM) sites를 분석하여 새로운 PTM sites를 발견했으며 이 부분들이 DRS 와 tRNAAsp사이에 위치할 것으로 보아 이들간의 결합에 영향을 미칠 것으로 예상했다. 146번 serine은 dimeric interface이면서 인산화하는 부분으로 146번 serine의 인산화가 DRS의 구조 변화를 유도하여 DRS의 기능을 조절할 것으로 본다. DRS의 결정구조는 MSC상에서의 DRS의 결합상태를 확인하고 DRS의 새로운 기능을 밝히는데 도움이 될 것으로 기대한다. Human cytosolic aspartyl-tRNA synthetase (DRS), a component of aminoacyl-tRNA synthetase (aaRS), is an enzyme that attaches the aspartic acid to its cognate tRNA in RNA translation process. Also it composes multi-tRNA synthetase complex (MSC) in combination with 8 cytosolic aaRSs and 3 aminoacyl tRNA synthetase complex-interacting multifunctional proteins, which is known as a reservoir for aaRSs and regulates aaRSs between their translational functions and non-canonical functions. Non-canonical function of DRS has not been revealed yet. We solved the crystal structure of DRS at 2.25 Å resolution. From the crystal structure, we revealed that DRS is a homodimer with a dimer interface 3,750.5 Å2 which is 16.6% of the monomeric surface area. When compared with mitochondrial DRS, they share only 22.9% sequence identity but are structurally similar to each other with r.m.s.d. distance of 1.7 Å. Our structure supports the switching model of the N-helix in DRS which was proposed to control the binding affinity between DRS and tRNAAsp, by showing the C-terminal end of the N-helix. And post-translational modification (PTM) of DRS analyses found new PTM sites that seem to affect the interaction of DRS and tRNAAsp. Ser146 residue located in dimeric interface of DRS is one of phosphorylation sites, and we imply that the phosphorylation of Ser146 triggers the conformational change of DRS which could be related with unforseen function. Our structural study might help to elucidate its interactions in MSC and shed light on its non-canonical functions.
냉동시스템에서 진공압력 예측과 기체부하에 따른 압력 변화 모델링 및 분석
냉동사이클 내부 불응축가스의 존재는 시스템 에너지 소비 효율에 큰 영향을 미친다. 불응축가스의 영향을 최소화하기 위해, 냉매를 주입하기 전 진공펌프를 사용하여 시스템 내부를 진공 상태로 유지한다. 하지만, 시스템 내부에 존재하는 기체부하를 완전히 제거하는 것은 불가능하다. 이에 따라 진공이 완료 된 후, 시스템 내부의 불응축가스 양은 상승한다. 냉매를 주입하기 전, 냉동시스템 내부의 불응축가스의 상승을 파악하는 것은 시스템 운전 성능에 중요함에도 불구하고, 이에 대한 연구는 현재까지 매우 부족하다. 따라서, 본 연구는 냉동시스템 내부의 진공압력에 영향을 미치는 인자를 분석하여, 시스템 내부 초기 불응축가스의 상승률을 이해하는데 목적이 있다. 본 연구에서는 진공압력 예측을 위한 모델링 방법을 제시하고, 이를 기반한 알고리즘을 개발하였다. 진공압력에 영향을 미치는 인자로서, 각 구성요소의 유동저항, 기체방출, 탈기 그리고 누설 등을 고려하였으며, 이러한 현상들이 냉동시스템 각 구성요소의 압력에 미치는 영향을 분석하였다. 진공펌프를 활용한 시스템 내부 기체 배출 과정에서는 각구성요소의 유동저항이 시스템 진공압력에 가장 큰 영향을 미쳤다. 특히, 핫라인과 응축기 내부 미세 채널은 낮은 전도도를 가지고 있어, 응축기 출구에서 가장 높은 진공압력이 예측되었다. 이 과정에서 기체방출과 탈기 현상으로 인한 분자 배출은 상대적으로 작아서 무시할 정도였다. 진공펌프가 정지한 후에는 기체누설이 시스템 내부 압력에 가장큰 영향을 미쳤다. 기체누설이 없는 상황에서는 배출되지 못한 분자들로 인해 시스템 내부 압력은 상승했다. 각 구성요소의 형상에 따라 압력 평균화 과정을 거친 후, 기체방출과 탈기의 영향으로 인해 압축기에서는 201%, 필터 드라이어에서는 43%의 압력이 증가하는 것으로 나타났다.
Linear Operators Acting on Banach Spaces
본 논문은 연산자이론과 관련되는 선형공간의 성질과 Banach공간의 성질에 대하여 연구한 것으로 그 내용을 서술하면 다음과 같다. 제 2절에서는 본 논문에서 사용될 정의와 기본 이론을 소개하고 문제 해결에 사용될 노름공간의 몇가지 성질을 증명하였다. 제 3절에서는 선형공간의 성질을 이용하여 Hahn-Banach Theorem을 확장하여 Theorem 3.5와 Theorem 3.6을 증명하였다. 제 4절에서는 Banach 공간의 예를 실제로 보이고 Theorem 4.4와 Theorem 4.5를 증명하였다.
유방암은 국내 여성암 발병률 2위를 차지하고 있으며 십여 년 전부터 매년 발병률이 증가하고 있는 추세이다. 또한 발병률 대비 사망률이 낮은 암임에도 불구하고 우리나라 유방암 환자의 사망률이 빠르게 증가하고 있다. 기존의 유방암 연구에서는 유방암 발생에 영향을 미치는 위험요인들을 고려한 실태분석 또는 로지스틱 회귀분석을 위주로 모형화 하는 것에 초점이 맞추어져 있었으며 사망위험에 영향을 미치는 요인에 대한 연구는 부족한 실정이다. 본 연구에서는 유방암 발생과 관련된 위험요인을 반영해 유방암 진단 환자들의 사망 위험률을 추정하는 것이다. 생존모형 중 지수 회귀 모형과 와이블 회귀모형 그리고 Cox 비례위험 모형을 이용하여 최적모형을 결정하였다. 분석 결과 유방암 사망 위험률에 영향을 미치는 주요 변수로는 연령, 가족력, 장애 유무, 과거력이 있으며 환경적인 요인보다는 주로 유전적인 영향이 높은 것으로 나타났다. 이를 토대로 추후 위험률을 감소시키는 예방대책을 마련할 수 있을 것으로 기대된다. Breast cancer, which has been increased from the past ten years, records second largest number of incidences out of female cancers in Korea. Despite the low level of mortality against the number of incidences, local patients with breast cancer have shown an incremental steep slope of a death rate. Existing breast cancer studies are mostly concentrated in analytic studies of influential variables, triggering breast cancer or leveraging the logistic regression models, which concerns the lack of research on factors dedicated to the mortality risks. This paper is, therefore, to estimate the potential mortality level of patients with breast cancer by implementing the causes of the disease. Among those survival models, Exponential regression, Weibull regression and Cox proportional hazard models are applied to derive the most optimized model. The result of analysis reveals that primary variables that affect mortality risks of breast cancer are age, family history, disabilities and individual history of diseases and the genetic factors are more relevant to the very issue than the environmental ones. The wishful thought is made for this study can be contributed in establishing such counterplan to let the mortality risks be on the decrease.
김경록 경상국립대학교 융합과학기술대학원 2024 국내석사
이 연구는 증가하는 위성 통신 요구로 인한 고급 안테나 시스템의 필요성을 해결하기 위해 지구 저궤도(LEO) 위성 통신을 위한 안테나 위치 측정기를 개발하는 데 초점을 맞추고 있습니다. LEO 위성은 정지 궤도(GEO) 위성보다 더 높은 대역폭과 더 낮은 대기 시간을 제공하여 고속 서비스에 이상적입니다. 그러나 그들의 빠른 움직임은 정확한 추적 시스템을 필요로 합니다. 주요 목표는 기존 방위각(Az-El) 안테나 시스템에서 고도 각도가 90도에 도달하면 신호 손실이 발생하는 키홀 현상을 해결하는 것입니다. 본 연구에서는 기울기 축을 통합하여 단일 시스템으로 LEO 위성을 지속적으로 추적할 수 있는 3축(Az-El-Tilt) 안테나 위치 측정기를 제안합니다. 연구는 제안된 포지셔너를 설계, 해석 및 테스트하는 과정을 거쳤습니다. 구조해석은 안정성을 확보하였으며 요구되는 속도와 토크에 맞게 모터와 기어를 선택하였습니다. Bernouli의 방정식을 이용하여 풍하중 효과를 계산하였으며, 시뮬레이션과 물리적 테스트를 통해 성능을 검증하였습니다.
데이터 매칭 최적 성능을 위한 자료연계 방법에 관한 연구
김경록 충북대학교 일반대학원 2025 국내박사
제4차 산업혁명 시대에 접어들며 데이터 활용의 중요성이 점차 강조되고 있다. 다양한 분야에서 데이터를 매칭하고 활용하려는 수요가 증가하면서 새 로운 가치 창출의 가능성이 열리고 있다. 국외에서는 데이터 매칭과 관련된 다양한 방법론이 오래전부터 활발히 연구되었으나, 국내에서는 주로 주민등록 번호와 같은 고유 식별자를 기반으로 한 결정적 자료연계 방식이 활용되어 왔 다. 이러한 방식은 데이터 불일치, 오류 문제, 그리고 개인정보 보호 규정 강 화로 인해 한계를 드러내고 있다. 본 연구는 이러한 한계를 해결하기 위해 확률적 자료연계 방법을 활용하여 데이터 매칭 성능을 최적화하고자 하였다. 더 나아가, 로지스틱 회귀, 랜덤 포 레스트, 그라디언트 부스팅 등 기계학습 방법을 도입하여 기존 방법론과 매칭 성능을 비교·분석하였다. 분석 결과, 기계학습 기반 자료연계 방식이 기존 확 률적 자료연계 방법보다 우수한 성능을 보였으며, 데이터 매칭에 있어 충분히 실용적인 가능성을 확인하였다. 본 연구는 데이터 통합 문제를 해결하기 위한 기계학습 기반 자료연계의 실용적이고 견고한 해결책을 제안한다. 주요 용어 : 데이터 매칭, 확률적 자료연계, 기계학습 접근방법 The importance of data utilization has been increasingly emphasized in the Fourth Industrial Revolution. As the demand for data matching and utilization grows across various fields, new opportunities for value creation are emerging. While diverse methodologies related to data matching have been extensively researched internationally, Korea has predominantly relied on deterministic record linkage methods based on unique identifiers such as resident registration numbers. These methods, however, face limitations due to data inconsistencies, errors, and the tightening of privacy protection regulations. This study aims to address these limitations by optimizing data matching performance through probabilistic record linkage methods. Furthermore, machine learning techniques such as logistic regression, random forests, and gradient boosting were introduced to compare and analyze performance against existing methods. The results demonstrate that machine learning-based record linkage methods outperform traditional 1) A thesis for the degree of Doctor of Philosophy in February 2025. probabilistic approaches, showing substantial practical applicability in data matching. This study proposes machine learning-based record linkage as a practical and robust solution to the challenges of data integration. Keywords : data matching, probabilistic record linkage, machine learning approach
The surface-enhanced Raman scattering (SERS) of 4-aminobenzenehtiol (4-ABT) has seen a surge of interest recently, since its SERS spectral features are dependent not only on the kinds of SERS substrates but also on the measurement conditions. A problem was initially encountered in the interpretation of the SERS spectrum of 4-ABT due to difficulty in correlating several peaks therein with the normal Raman peaks, but the SERS spectral pattern of 4-ABT looked similar to that of 4,4′-dimercaptoazobenzene (4,4′-DMAB). To clarify the issue, the SERS characteristics of 4-ABT and its analog molecules adsorbed on metal surfaces are carefully reinvestigated to understand the charge-transfer chemical enhancement mechanism in this Ph.D. thesis. In chapter 1, the general overview of the Raman scattering theory and SERS mechanisms are described concisely. SERS is an abnormal surface optical phenomenon resulting in strongly increased Raman signals for molecules adsorbed onto nanostructured coinage metals. In recent years, it has been reported that even single-molecule detection is possible by surface-enhanced resonance Raman scattering (SERRS), suggesting that the enhancement factor (EF) can reach as much as 1014-1015. Two enhancement mechanisms, one called a long-range electromagnetic (EM) effect and the other called a short-range charge-transfer (CT) chemical effect, are simultaneously operative. Both mechanisms suggest the possibility of enhanced absorption and enhanced photochemistry for surface-adsorbed molecules. In chapter 2, the current status of SERS studies on 4-ABT are described. For a long time, 4-ABT, also known as p-aminothiophenol (PATP) or p-mercaptoaniline (pMA), is one of the important surface probe molecules in SERS community and the nanoscience field. The main reasons are that 4-ABT molecules are strongly and easily adsorbed onto the most metal substrates and generate a strong and unique SERS signal which is very sensitive to the type of substrates and measurement conditions. The normal Raman (NR) spectrum of 4-ABT is mostly featureless in the region of 1100~1500 cm-1, but three to four peaks appear newly in that region in its SERS spectra. Since these peaks can be assigned to the b2-type vibration, which are arising from charge transfer process through the Herzberg-Teller vibronic coupling term, 4-ABT has been regarded for two decades as a model adsorbate for probing the CM effect in SERS. Very recently, however, a number of researchers have come up with a different explanation for the appearance of these b2-type bands that the b2-type bands appearing in the SERS of 4-ABT must be the N=N stretching vibrations of 4,4-DMAB produced from 4-ABT via a catalytic coupling reaction on the metal substrates. The elucidation of the SERS characteristics of 4-ABT and its analog molecules including 4,4-DMAB is thus needed to see another or why we have made a wrong assignment during the past 15 years. In chapter 3, the SERS characteristics of 4-ABT and 4-ABT adsorbed on Pt nanoparticles are investigated. Pt is a well-known catalyst that has a high catalytic activity. It is found, however, that 4-nitrobenzenethiol (4-NBT) is barely subjected to photoreaction on a Pt surface. On the contrary, the SERS spectra of 4-ABT on Pt clearly show that the b2-type bands are increasing in relative intensity toward shorter wavelength. In addition, the SERS spectral pattern of 4-ABT on Pt is variable not only with changes in the electrode potential but also by altering the excitation wavelength. These spectral variations could be understood by presuming that the chemical enhancement mechanism is also operating in this system, along with the electromagnetic enhancement. Interestingly, similar spectral variation is also observed even under ambient conditions by exposure of 4-ABT on Ag to volatile organic chemicals (VOCs) such as acetone and ammonia. Based on the potential-dependent SERS data, the effect of acetone appeared to correspond to an application of +0.15 V to the Ag substrate vs a saturated Ag/AgCl electrode, while the effect of ammonia corresponded to the application of -0.45 V to Ag. In chapter 4, as one of several attempts to explore the origin of the b2-type bands observable in the SERS of 4-ABT, the pH dependence has been investigated. Consulting the claim that those b2-type bands might be associated with a surface-induced photoreaction product such as 4,4′-DMAB, the pH dependence of the SERS spectral feature of 4,4′-DMAB was also examined. Distinct differences were observed in the SERS spectra of 4-ABT and 4,4′-DMAB. The SERS spectral feature of 4,4′-DMAB had virtually no dependence either on the excitation wavelength or on the kind of metal substrate or even on the solution pH. On the other hand, the SERS spectral pattern of 4-ABT displayed substantial changes, depending not only on the excitation wavelength and the kind of SERS substrates but also on the solution pH. It is presumed that when the amine group of 4-ABT is protonated at acidic pHs, the electron population in the benzene ring moiety decreases, resulting in the up-shift of the LUMO level of 4-ABT, as revealed by UV-vis spectra and from an ab initio calculation, thereby prohibiting the charge transfer resonance chemical enhancement. In chapter 5, the similarity and dissimilarity in the SERS of 4-ABT and 4,4′-DMAB, along with the SERS spectrum of their analog molecule 4,4′-dimercaptohydrazobenzene (4,4′-DMHAB) were carefully examined. Under ambient conditions, the SERS spectra of 4-ABT, 4,4′-DMAB, and 4,4′-DMHAB on Ag looked in fact comparable to one another, but the spectral dissimilarity was evidenced not only from the SERS spectra taken after treating the probing substrates with a borohydride solution but also from the potential-dependent SERS spectra. It was found that 4,4′-DMAB on Ag could convert to 4-ABT not only by contact with a 100 mM borohydride but also by lowering the potential below -1.0 V. The reverse reaction from 4-ABT on Ag to 4,4′-DMAB appeared insignificant electrochemically as well as photochemically. Furthermore, it was found that the conversion of 4,4′-DMAB to 4-ABT on Ag is a more feasible process upon irradiation with a 514.5-nm (not 632.8-nm) laser under ambient conditions. The SERS spectral pattern of 4,4-DMAB on Ag varied as a function of laser irradiation time, finally becoming the same as that of 4-ABT on Ag. The photoconversion of 4,4-DMAB upon 514.5-nm radiation was further confirmed not only by the coupling reaction with 4-cyanobenzoic acid to form amide bonds but also by the selective growth of calcium carbonate. After considering all the experiments conducted in the work, it is concluded that the appearance of the so-called b2-type bands in the SERS of 4-ABT must be attributed wholly to the involvement of the chemical enhancement mechanism, not due to the formation of 4,4′-DMAB.
주택연금 (역모기지) 도입의 효과 분석 : 노인소득보장 효과를 중심으로
김경록 서울대학교 행정대학원 2012 국내석사
우리나라는 급속한 고령화의 진전과 출산율 저하로 인하여 65세 이상의 고령자가 전체 인구에서 차지하는 비중이 급격히 증가하고 있다. 한편, 우리나라의 노후소득 보장체계는 공적 노후소득 보장책인 국민연금이 있으며, 사적 노후소득 보장체계로 퇴직연금(퇴직금), 개인연금 등이 있어 3층의 노후소득 보장체계를 갖추고 있으나 실질적으로 노인들에 대한 소득보장 기능이 제대로 이루어지지 못하고 있는 것이 현실이다. 한편 노인계층은 일반적으로 주택을 소유하고 있는 비율은 높으나, 일정한 소득이 없어서 안정된 생활을 유지하기 어려운 경우가 많다. 이러한 상황에서는 주택연금이 노인들의 소득보장을 위하여 유용한 수단으로 활용될 수 있다. 주택연금 제도는 거주용 부동산을 소유하고 있는 고령자가 그 주택자산의 유동화를 통해 사망 시점 또는 계약 만료 시점까지 주택을 담보로 매월 일정한 금액을 지급받음으로써 안정된 생활을 영위할 수 있도록 한다. 즉, 현재 상태 그대로 자택에 계속 거주하면서 그 자산의 가치를 조금씩 유동화하는 것으로 소득보전과 동시에 안정된 주거생활을 보장할 수 있기 때문이다. 우리나라는 급속한 고령화 현상으로 인해 향후 야기될 것으로 예상되는 고령자의 복지문제와 정부의 재정적자 심화 문제에 대비하기 위하여 2007년 7월에 주택연금을 도입하였다. 한국주택금융공사의 주택연금은 주택가격 상승률, 금리수준, 이용자의 사망확률 등의 위험변수에 대하여 일정한 값을 적용하여 향후 예상되는 보증료 수입 합계액의 현재가치가 대위변제로 인한 예상 손실액의 현재가치와 같아지는 수준에서 월지급 연금액이 결정되도록 설계되었다. 현재 한국주택금융공사의 주택연금에 가입한 이용자의 실제 월지급 연금액이나 시뮬레이션을 통해 산출한 월지급 연금액의 경우에도 주택가격이 3억원 이상인 때에는 소득대체율과 소비대체율이 모두 30%이상으로 나타나고 있으나, 주택가격이 1억원인 경우에는 소득대체율과 소비대체율이 10% 수준으로 노인가구의 소득에 크게 도움이 되지 않을 수 있다. 하지만 고령자의 연령이 높아질수록 주택가격이 낮은 경우에도 월지급 연금액이 높아지므로 고령자에 대해서는 소득대체율과 소비대체율이 높아지는 효과가 있다. 주택연금의 정책목표가 주택을 소유하고 있으나 소득이 적은 노인계층에 대하여 소득을 보장해 주는 것을 목표로 하고 있으며, 2028년 이후 국민연금의 소득대체율이 40%로 낮아지게 되는 점을 감안하면, 2~3억원 이상의 주택을 소유한 노인이 주택연금에 가입하게 되면 국민연금과 유사한 수준의 새로운 소득을 창출하게 되므로 주택연금이 국민연금, 퇴직연금, 개인연금의 3층적 소득보장체계를 보완해주는 역할을 수행하고 있다.