http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
對稱屈評 Crack을 가친 有限판 S.I.F.의 光彈性的 決定
金鍾周 영남이공대학 1982 論文集 Vol.11 No.-
The well-known experimental stress analysis method, photoelasticity, have extensively been used for the determination of stress intensity factor in the vicinity of crack tip stress field in two or three dimensional problems. The stress analysis in photoelastic technique is usually done by using difference of the principal stresses can be obtained from isochromatic fringe patterns. In this paper, by the use of photoelastic experiment, determination of stress intensity factor of finite strip with symmetrically deflected crack which is subjected to uniform tensile stress has been studied variation of crack length and deflected crack angle. As the result, stress intensity factor at crack tip of finite strip with symmetrically deflected crack can be obtain from figure 7, 8.10 and 11.
레이돔 제조 공정과정에서 유전율에 미치는 영향 인자에 대한 연구
강신민,금종주,강춘호,이승재,변기식,Kang, Shin-Min,Keum, Jong-Ju,Kang, Chun-Ho,Lee, Seung-Jae,Byun, Gi-Sig 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.2
비선형 곡선 형상의 레이돔은 안테나 보호를 위해 적당한 기계적 강도와 RF(Radio Frequency)적으로 전기적 성능 저하가 최소화 될 수 있도록 설계 되어져야 한다. 특히 전기 적 성능은 원소재가 가지는 유전율에 따라 좌우되는 중요 요소로서 제조 과정에서 관리하여야 하는 중요한 인자중 하나이다. 본 연구에서는 레이돔 제조 공정 중에서 유전율에 영향을 미치는 주요 인자를 실험을 통하여 밝혀내고, Simulation을 통하여 유전율이 레이돔의 전기적 성능에 미치는 영향을 파악한다. A nonlinear curve shaped radome should be designed in a way that the deterioration of electrical performance in terms of mechanical strength and radio frequency(RF) can be minimized to protect the antenna. Electrical performance, in particular, is a critical factor that depends on the permittivity of the original materials and thus should be monitored during the manufacturing process along with other factors. This study set out to identify major factors that would affect permittivity during the manufacturing process of a radome through experiments and examine the impacts of permittivity on a radome's electrical performance through simulations.
<<한국어 5모음의 조음적 제어 분석을 이용한 자동 독화에 관한 연구>>
이경호,금종주,이상범,Lee, Kyong-Ho,Kum, Jong-Ju,Rhee, Sang-Bum 한국컴퓨터산업학회 2007 컴퓨터産業敎育學會論文誌 Vol.8 No.4
이 논문에서 우리는 입주위에 6개의 관찰 점을 설정하고, 한국어 중 '아/에/이/오/우' 5 모음을 발음할 때 생기는 관찰 점간의 거리 변화를 계수화 하였다. 약 450개의 자료를 모아 분석하고 이 분석을 바탕으로 시스템을 구축하여 실험하였다. 우리 시스템에서는 컴퓨터에 연결된 카메라를 사용하였으며, 6개의 영역간의 변화를 계수로 하였다. 이 실험에 정상인 80명이 동원되었고, 사람들 사이에 있는 관찰 오차를 정규화를 통하여 수정하였다. 30명으로 분석하였고, 50명으로 인식 실험을 하였다. 3개의 시스템을 구축하였는데 신경망이 가장 좋은 결과를 보였다. 신경망의 인식 결과는 87.44%였다. In this paper, we set 6 interesting points around lips. Analyzed and characterized is the distance change of these 6 interesting points when people pronounces 5 vowels of Korean language. 450 data are gathered and analyzed. Based on this analysis, the system is constructed and the recognition experiments are performed. In this system, we used the camera connected to computer to measure the distance vector between 6 interesting points. In the experiment, 80 normal persons were sampled. The observational error between samples was corrected using normalization method. We analyzed with 30 persons and experimented with 50 persons. We constructed three recognition systems and of those the neural net system gave the best recognition result of 87.44 %.
이경호,금종주,이상범,Lee, Kyong-Ho,Kum, Jong-Ju,Rhee, Sang-Bum 한국컴퓨터산업학회 2008 컴퓨터産業敎育學會論文誌 Vol.9 No.1
본 논문에서는 입술 주위 영상만으로 독화를 위한 에지 파라미터를 추출하였고, 한국어 5모음 'ㅏ/ㅔ/ㅣ/ㅗ/ㅜ'를 인식하는데 효과적임을 보였다. 발화하는 입주위의 이미지를 $5{\times}5$로 나누고, 각 영역에 소벨 연산자를 적용하여 디지털 에지 수를 구한 후, 이 값들의 관찰 오차를 정규화를 통하여 수정하고, 정규화 된 값을 파라미터로 사용하였다. 파라미터의 견인성을 확인하기 위하여, 자동 독화 시스템을 구축하였다. 인식 실험에 정상인 50명이 동원되었고, 10명의 이미지로 분석하고, 다른 40명의 이미지로 인식 실험을 하였다. 500개의 데이터를 분석하고, 이 분석을 바탕으로 신경망 시스템을 구축하였으며, 400개의 데이터로 인식 실험하였다. 신경망 시스템의 최고 인식 결과는 91.1%였다. In this paper, the edge parameters were drawn from speaking image around lip and effective automatic lip reading system to recognize the Korean 'a/e/i/o/u' 5 owels were constructed using the parameter. Speaking images around lip were divided into $5{\times}5$ pane. In each pane the number of digital edge element using Sobel operator were evaluated. The observational error between samples was corrected by using normalization method and the normalized value is used for parameter In the experiment to convince the strength of parameter, 50 normal persons were sampled. The images of 10 persons were analyzed and the images of another 40 persons were experimented for recognition. 500 data are gathered and analyzed. Based on this analysis, the neural net system is constructed and the recognition experiments are performed for 400 data. The neural net system gave the best recognition result of 91.1%.
천마 탐지레이더 Limit&STC 조립체 개선을 통한 탐지성능 향상
윤재복,김시옥,금종주,Yoon, Jaebok,Kim, Siok,Keum, Jongju 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.1
In this paper, we have described the performance improvement of surveillance radar to prevent damage or malfunction of surveillance radar RF head unit due to the strong reflections caused by artificial obstacles at close range. We have proposed a technique to improve the performance of the RF head unit as a solution to overcome the limitations of the operating system and improve radar performance. We have verified the effectiveness of the improvement by comparing the before and after results applied to actual system.
에너지와 신뢰성을 고려한 2계층 모바일 P2P 시스템과 라우팅 스킴
한정식(JungSuk Han),금종주(JongJoo Keum) 한국정보과학회 2011 정보과학회 컴퓨팅의 실제 논문지 Vol.17 No.2
모바일 기기 보급이 급증함에 따라 모바일 환경에서 이루어지는 피어-투-피어(P2P)방식에 대한 연구가 활발히 진행되고 있다. 모바일 기기는 배터리 용량과 통신 범위의 한계가 있기 때문에 통신을 할 때 에너지의 효율성과 네트워크의 신뢰성을 고려해야 한다. 슈퍼피어를 이용한 2계층 모바일 P2P 시스템은 기존의 단일 계층 모바일 P2P 시스템보다 적은 양의 메시지를 이용하여 파일을 탐색할 수 있다는 장점이 있지만, 슈퍼피어로 선정된 피어는 주변의 서브피어들로부터 파일 탐색 요청 메시지를 지속적으로 받게 되어 에너지가 빨리 소모되는 단점이 있다. 슈퍼피어는 주위 서브피어의 정보를 가지고 있기 때문에 통신의 중심역할을 하게 된다. 이런 슈퍼피어가 이동으로 인해 주위 서브피어와 통신단절이 된다면 네트워크의 신뢰성에 문제가 된다. 본 논문은 슈퍼피어를 이용한 2계층 모바일 P2P 시스템에서 슈퍼피어를 선정할 때 피어의 에너지의 양과 이동속도를 모두 고려하여 에너지 효율성과 네트워크의 신뢰성을 높였다. 이 방법을 라우팅 경로를 정할 때에도 사용하여 피어들이 통신할 때 충분한 에너지의 양과 안정적인 이동속도를 가진 피어를 이용하게 만들었다. 실험을 통해서 성능평가를 하였으며, 제안된 시스템과 라우팅 스킴은 에너지 효율성과 네트워크의 신뢰성에서 기존의 시스템보다 우수한 결과를 보여주었다. As the mobile technology advances, various mobile peer-to-peer (P2P) systems have been developed. Since mobile devices have limited energy capacity and communication range, efficient use of the energy and reliability of network are indispensable for mobile P2P systems. The double layered mobile P2P system using super peers use less quantity of message to find file than the single layered mobile P2P system. However, super peers consume lots of energy since sub peers send request message to their super peers continuously. As super peers manage their sub peers information, super peers are central role of communication. If super peers cannot communicate with their sub peers due to movement of super peers, it would raise network reliability problems. In this paper, the proposed system that considers remaining energy and speed of peers improves energy efficiency and network reliability. Also we propose the routing scheme that selects peers with sufficient amount of energy and steady speed whenever peers communicate with each other. The experimental results show the proposed system outperforms a typical double layered mobile P2P system using super peers in terms of energy efficiency and network reliability.