http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권수안,서영찬,조용주 한국도로학회 2006 한국도로학회논문집 Vol.8 No.1
Methods of back calculation for either design procedures or elastic moduli obtained from FWD(Falling Weight Deflectometer) tests have widely been used to predict remaining life of airfield concrete pavements. Since the variation of the elastic modulus obtained from the FWD test depends on the back calculation methods, prediction of remaining life of airfield pavement using the back calculation method has not been reliable. In addition, the FWD method only concentrates on the structural integrity of the pavement without considering functional distress. In this study, a newly developed remaining life estimation procedure is proposed. This methodology includes both structural and functional consideration and suggests models and decision criteria for each stage. In order to improve the estimation procedure on remaining life of pavement, conducted the several tests on an old airfield concrete pavement. As a result, it is concluded that the load transfer efficiency on joint is better for predicting remaining life of pavement than the elastic modulus, which is commonly used. In order to verify applicability of the newly developed estimation procedure and detailed models, investigation and analysis were conducted according to the new methodology on C-airfield pavement. Finally, it is confirmed that the efficiency of the proposed method for practical application was good enough.
국도 아스팔트 포장 파손예측모델 개발을 위한 장기 관측 구간 선정에 관한 연구
권수안,유평준,김기현,조윤호,Kwon, Soo-Ahn,Yoo, Pyeong-Joon,Kim, Ki-Hyun,Cho, Yoon-Ho 한국도로학회 2002 한국도로포장공학회 논문집 Vol.4 No.1
본 연구에서는 국도 아스팔트 포장의 포장파손예측모델을 개발하기 위한 장기 공용성 관측 구간을 선정하였다. 관측 구간의 선정을 위하여 신설 포장 구간 및 덧씌우기 포장 구간에 대한 실험계획표를 작성하였고, 실험계획표의 각 셀에 해당되는 구간은 국도 데이터 베이스를 이용하여 예비 관측 구간을 선정하였고, 현장 조사를 통하여 최종 관측 구간을 선정하였다. 선정된 관측 구간의 단위 연장은 200m이며, 신설 포장 구간 47개소 및 덧씌우기 포장 구간 48개소가 선정되었다. 선정된 관측 구간에 대하여 시간의 변화 또는 교통량의 변화에 따른 포장 상태를 바탕으로 균열 및 러팅에 관한 1차 분석 작업을 진행하였다. 향후 포장 관련 다양한 정보가 데이터 베이스에 구축된 후 통계분석을 통하여 포장 파손 예측 모형이 개발되어야 할 것이다. Special pavement test sections were selected to develop a distress prediction model on asphalt pavement of National Highway. Experimental design was conducted for the selection of LTPP sections on in-service pavement(new and overlaid pavement) using several variables affecting pavement performance. Preliminary sections that satisfied the design template were chosen from the national highway database, and final selection was fixed through field inspection. The number of monitoring section is 95 including 47 overlaid pavement. A pavement distress data such as crack and rutting were collected for two years. An interim pavement performance analysis was peformed to show feasibility of performance monitoring program. Data related pavement such as traffic, weather, material characteristic and crack etc. should be collected for next project years and distress prediction model will be developed through the statistical analysis.