http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권병국,손일원 항공우주시스템공학회 2022 항공우주시스템공학회지 Vol.16 No.1
제트 전투기의 항공전자 시스템 아키텍처 개발 경향은 서브 시스템 구성요소 기능의 디지털화, RF 센서 공유의 증가, 광섬유 채널 네트워크, 그리고 모듈화된 통합 구조이다. 5세대 제트 전투기(F-22, F-35)의 항공전자 시스템 아키텍처는 컴퓨팅 기능 통합과 RF 통합 센서 시스템 기반인 통합 모듈형 항공전자 시스템으로 발전했다. 제트 전투기의 통합 항공전자 시스템은 전투기의 전투력 향상, 내결함성 및 제어 용이성을 제공해야한다. 이를 위해 본 논문에서는 5세대 제트 전투기의 항공전자 시스템 아키텍처 분석을 통해 차세대 제트 전투기의 항공전자 시스템 아키텍처의 방향과 요구사항을 제시한다. 차세대 통합 모듈화 항공전자 시스템 아키텍처 요구사항들의 핵심 과제는 주요 구성 장치와 센서들을 항공기에 통합하는 플랫폼을 구축하는 것이라 할 수 있다. 즉, 차세대 전투기의 아키텍처는 시스템의 표준화와 개방형 인터페이스를 통한 각 서브 시스템의 센서통합, 기능요소 통합, 네트워크 통합이며 조종사와 전투기의 일체화로 고자율적 대응 및 제어능력 향상에 있다.
권병국 대한설비공학회 2002 설비저널 Vol.31 No.5
부유분진 측정 센서의 지식 및 역할에 대한 이해를 돕기 위해 당사에서 개발된 파티클 센서를 예시로 하여 분진 측정 센서에 대한 전반적인 원리와 센서 응용 및 적용 방향을 제시하고자 한다.
Effects of the CG Positions on the Autorotative Flight of Maple Seeds
권병국,손명환 한국항공우주학회 2022 International Journal of Aeronautical and Space Sc Vol.23 No.2
The present study performed 6-degree-of-freedom (6DOF) simulations of the autorotative flight of maple seeds to investigate the interrelation between the motion parameters and the configuration elements, especially the center of gravity (CG). An artificial maple seed of CG point adjustable was designed, and its autorotative flight was simulated by simultaneously solving the flow field around the seed and its 6DOF motion. The spinning rate and the magnitude of the pitch angle (which is always negative) increased as the CG point moves forward toward the leading edge of the seed. It was found that the chordwise position of CG, which determined the value of the moment about the span axis and consequently governed the pitch angle, was very influential to the transient behavior and the converged values of the motion parameter of the autorotative flight of maple seeds. However, the effects of the CG point movement in the spanwise direction were relatively small compared to the CG point movement in the chordwise direction.
Cu Seed Layer의 열처리에 따른 전해동도금 전착속도 개선
권병국,신동명,김형국,황윤회,Kwon, Byungkoog,Shin, Dong-Myeong,Kim, Hyung Kook,Hwang, Yoon-Hwae 한국재료학회 2014 한국재료학회지 Vol.24 No.4
A thin Cu seed layer for electroplating has been employed for decades in the miniaturization and integration of printed circuit board (PCB), however many problems are still caused by the thin Cu seed layer, e.g., open circuit faults in PCB, dimple defects, low conductivity, and etc. Here, we studied the effect of heat treatment of the thin Cu seed layer on the deposition rate of electroplated Cu. We investigated the heat-treatment effect on the crystallite size, morphology, electrical properties, and electrodeposition thickness by X-ray diffraction (XRD), atomic force microscope (AFM), four point probe (FPP), and scanning electron microscope (SEM) measurements, respectively. The results showed that post heat treatment of the thin Cu seed layer could improve surface roughness as well as electrical conductivity. Moreover, the deposition rate of electroplated Cu was improved about 148% by heat treatment of the Cu seed layer, indicating that the enhanced electrical conductivity and surface roughness accelerated the formation of Cu nuclei during electroplating. We also confirmed that the electrodeposition rate in the via filling process was also accelerated by heat-treating the Cu seed layer.
박종대,권병국 培材大學校 1997 培材論叢 Vol.2 No.-
반도체 레이저의 주파수를 절대적으로 안정화시키기 위하여 루비듐 원자의 흡수선을 이용하였다. 이를 위해 두 개의 서로 수직인 편광자 안에 류비듐 셀을 설치하고, 광펌핑으로 루비듐 원자에 원형 복굴절을 유도하였다. 반도체 레이저에서 나온 레이저 빔이 이 셀을 통과하여 되먹임 되도록하여 광학적으로 반도체 레이저의 주파수를 안정화 시켰다. Absorption spectrum of Rubidium atoms was utilized to stabilize the oscillation frequency of a semiconductor laser. A Rubidium cell was installed between crossed polarizers and circular birefringence was induced by optical pumping. The frequency of a semiconductor laser was stabilized by optical feedback of transmitted laser beam through the optically pumped cell.