http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이정렬,곽상우,최하정 한국방재학회 2014 한국방재학회 학술발표대회논문집 Vol.2014 No.-
2012년 골프산업규모를 살펴보면 골프인구 470만명, 년간 골프지출액 23조원, 골프용품시장은 1~1.5조원(클럽 8,000억원 ~ 1조2천억원 / 골프공, 골프화, 골프장갑 등 2~3,000억원), 골프웨어 4,000억원으로 전체 산업 규모는 24.5조원 ~ 25조원에 이를 것으로 추정되고 있다. 이와 같이 소득이 증대되면서 성장하고 있는 골프산업과 비례하여 골프장 안전사고 또한 골프 동호인구의 증가와 함께 어느 순간 사회적 이슈로 떠오를 만큼 증가하고 있는 것이 현실이다. 골프장 사고는 골프장이 갖는 입지적인 문제로 파생되는 주변 기상, 지형상의 사고 유발 환경도 문제이지만 골프장과 골퍼들이 기본적인 안전수칙을 무시해 일어나는 경우가 대부분이다. 골퍼들은 해저드 익사, 카트 전복, 낙뢰 감전, 타구 사고 등을 너무도 가볍게 생각하는 경향이 있다. 이는 안전 불감증 또는 부주의한 방심에 기인하며 무방비 상태에서 갑자기 발생하는 사고로 인하여 대형사고로 이어지곤 한다. 본 연구에서는 골프장 안전사고에 대한 자료가 불충분한 관계로 가상의 골프장 사고 시나리오에 근거한 위험 평가 과정을 제시하고 그 평가 결과에 따른 대처 방안 마련 과정을 FTA분석을 통하여 제시하여 ‘무사고 안전 골프장’ 안전관리가 마련되도록 한다.
김기훈,김정문,곽상우,이종윤,김휘율 한국섬유공학회 2022 Fibers and polymers Vol.23 No.9
Tissue engineering for wound healing is an evolving field to restore skin defects resulted from disease, burn ortrauma. Electrospinning technique has been widely utilized for fabricating nano/micro-scale fibrous scaffolds in tissueengineering for decades. In this study, a blended nanofibrous mat (NFM) using synthetic and natural polymers, polyurethane(PU) and SIS respectively, was fabricated for wound healing. Small intestine submucosa (SIS) was digested with pepsin priorto blending with PU solution. Morphology, functional groups, water contact angle, degradation test, and tensile testing wereexamined for physicochemical properties of the PU/SIS blended NFMs. 3T3-L1 cells seeded on NFMs and cell attachmentand viability were evaluated as well. The PU/SIS blended NFMs showed enhanced hydrophilicity compared to the pure PUNFM. The mechanical properties of PU/SIS blended NFMs were found to be suitable for cell attachment and proliferation. Better initial attachment and proliferation of 3T3-L1 cells of PU/SIS blended NFMs compared to PU NFM were observed bycellular morphology demonstrated by SEM and a water-soluble tetrazolium salt assay kit. These results suggest that the novelcombination of PU and SIS could be potentially applied for potential wound healing application.
우인식,송낙형,이영주,곽상우,방은남,이근수,김정수,장용복,박현택,홍재식,박영민,김양수,최창호,Woo, I.S.,Song, N.H.,Lee, Y.J.,Kwag, S.W.,Bang, E.N.,Lee, K.S.,Kim, J.S.,Jang, Y.B.,Park, H.T.,Hong, Jae-Sik,Park, Y.M.,Kim, Y.S.,Choi, C.H. 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.6
KSTAR (Korea Superconducting Tokamak Advanced Research) 전류전송계 (Current Feeder System)는 4.5 K의 저온에서 운전되는 초전도자석과 300 K의 실온에서 운전되는 전원장치 (Magnet Power Supply)를 전기적으로 연결하는 장치이다. 전류전송계는 최대 35 kA의 DC 전류가 인가되는 TF 자석용 및 350초간 20$\sim$26 ㎄의펄스 전류가 인가되는 PF 자석용으로 분리되어 있으며 리드박스 내부는 전류인입선, 초전도버스라인, 열차폐체 및 냉각라인 등이 설치되어 있다. 리드박스와 초전도버스라인 진공덕트는 KSTAR 주장치와는 별도로 진공배기 시스템이 구축되어있으며, 전체적으로 아령 형상을 하고 있는 진공공간을 효율적으로 진공배기하기 위하여 버스라인 덕트와 주장치 저온용기 사이에 진공 분리막 (Vacuum Separator)이 설치되어 있다. 진공배기를 위한 초벌배기계는 로터리펌프 및 부스터펌프 (Mechanical Booster Pump)로 구축되었으며 고진공 배기계는 4대의 크라이오펌프 (Cryo-pump)로 구축되었다. 진공장치 운전을 위해 PLC 기반의 로컬 제어시스템을 구축하였고 장치 안전을 위한 자체 인터록과 중앙인터록 시스템 및 중앙제어연계시스템이 함께 구축되어 있다. 전류전송계 설치완료 후 진공배기 시운전을 통해 배기시스템의 자가진단 및 리드박스 내부에 설치되어 있는 헬륨배관의 진공누설검사를 완료하였으며, 액체질소를 사용하여 전류인입선 냉각시험을 완료하였다. Current feeder system (CFS) for Korea superconducting tokamak advanced research(KSTAR) project plays a role to interconnect magnet power supply (MPS) and superconducting (SC) magnets through the normal bus-bar at the room temperature(300 K) environment and the SC bus-line at the low temperature (4.5 K) environment. It is divided by two systems, i.e., toroidal field system which operates at 35 kA DC currents and poloidal field system wherein 20$\sim$26 kA pulsed currents are applied during 350 s transient time. Aside from the vacuum system of main cryostat, an independent vacuum system was constructed for the CFS in which a roughing system is consisted by a rotary and a mechanical booster pump and a high vacuum system is developed by four cryo-pumps with one dry pump as a backing pump. A self interlock and its control system, and a supervisory interlock and its control system are also established for the operational reliability as well. The entire CFS was completely tested including the reliability of local/supervisory control/interlock, helium gas leakage, vacuum pressure, and so on.
KSTAR 전류인입선 및 헬륨냉매 제어시스템 제작 및 설치
송낙형,우인식,이영주,곽상우,방은남,이근수,김정수,장용복,박현택,홍재식,박영민,김양수,최창호,Song, N.H.,Woo, I.S.,Lee, Y.J.,Kwag, S.W.,Bang, E.N.,Lee, K.S.,Kim, J.S.,Jang, Y.B.,Park, H.T.,Hong, J.S.,Park, Y.M.,Kim, Y.S.,Choi, C.H. 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.5
KSTAR (Korea Superconducting Tokamak Advanced Research) 전류인입선(CL; Current Lead)은 4.5 K의 저온에서 운전되는 초전도 버스라인과 300 K의 실온에서 운전되는 MPS (Magnet Power Supply)를 전기적으로 연결하는 장치이다. 초기 플라즈마 발생시험을 위하여 TF (Toroidal Field) 및 PF (Poloidal Field) 리드박스에 전류인입선이 설치된다. TF 자석용 CL은 17.5 kA급 4 개의 CL에 최대 35 kA의 DC 전류가 인가되며, PF 자석용은 13 kA급 14 개의 CL에 350초간 $20\;{\sim}\;26\;kA$의 펄스 전류가 인가된다. 각각의 전류인입선은 TF 및 PF 자석에 전류를 인가하기 위한 버스라인이 연결되어 있으며, 전류인입선을 통해 초전도 버스라인으로 전달되는 전도열 및 전류인가시 발생되는 주울(Joule) 열을 차단하기 위한 헬륨냉매 제어시스템이 KSTAR 주장치와는 별도로 설치되어 있다. 리드박스 내 외부의 배관 및 제어시스템 설치완료 후 고진공 배기, 헬륨 누설검사, 전류인입선 유량 검사 및 액체질소 냉각시험을 실시하여 장치의 성능검증을 완료하였다. KSTAR (Korea Superconducting Tokamak Advanced Research) current lead system (CLS) has a role to interconnect magnet power supply (MPS) in room temperature (300 K) and superconducting (SC) bus-line, electrically. For the first plasma experiments, it should be assembled 4 current leads (CL) on toroidal field (TF) current lead box (CLB) and 14 leads on poloidal field (PF) CLB. Two current leads, with the design currents 17.5 kA, and SC bus-lines are connected in parallel to supply 35 kA DC currents on TF magnet. Whereas, it could supply $20\;{\sim}\;26\;kA$ to each pairs of PF magnets during more than 350 s. At the cold terminals of the leads, there are joined SC bus-lines and it was constructed helium coolant control system, aside from main tokamak system, to protect heat flux through current leads and enhanced Joule heat due to supplied currents. Throughout the establishment processes, it was tested the high vacuum pumping, helium leak of the helium lines and hardwares mounted between the helium lines, flow controls for CL, and liquid nitrogen cool-down of possible parts (current leads, CL helium lines, and thermal shield helium lines for CLB), for the accomplishment of the required performances.
Synthesis and Photophysical Properties of (Cl2Ph)Salen-based Indium Complexes
Won Hee Woo,이석호,곽상우,김민,이강문,박명환,김영조 대한화학회 2020 Bulletin of the Korean Chemical Society Vol.41 No.7
Herein, to elucidate the effect of substituent electronic properties on the photophysical properties of indium-based organometallic luminophores, we prepare a series of indium complexes (1?5) with salen ligands bridged by an electron-withdrawing 4,5-dichlorophenylene (Cl2Ph) unit. The structures of all the complexes are fully confirmed by 1H and 13C NMR spectroscopy as well as elemental analysis. In particular, the molecular structure of 3, confirmed by X-ray crystallography, is monomeric and the central indium atom adopts a square-pyramidal geometry. The UV/Vis and fluorescence spectra of 1?5 show typically salen-centered intramolecular charge transfer transitions with gradual bathochromic shifts as the electron-donating ability of the substituents increases. This feature is further supported by electrochimical studies. Furthermore, the lowest unoccupied molecular orbital energy levels of 1?5 are considerably lower (approximately ?3.70?eV) than those of salen-based indium complexes with other aryl-bridging units owing to the reduced electron-donating effect of the (Cl2Ph)salen group.
2011년 KSTAR 캠페인 중 HRS 비상정지 복구 결과
주재준(J.J. Joo),문경모(K.M. Moon),박동성(D.S. Park),장용복(Y.B. Chang),곽상우(S.W. Kwag),송낙형(N.H. Song),이현정(H.J. Lee),박영민(Y.M. Park),김남원(N.W. Kim),우인식(I.S. Woo),양형렬(H.L. Yang) 대한설비공학회 2012 대한설비공학회 학술발표대회논문집 Vol.2012 No.6
The KSTAR cool-down operation is divided 3 steps. One is cool down from ambient temperature to 4.5 K and another is keeping cryogenic state during the plasma experiment and the other is warm up to room temperature. During the 4th campaign of KSTAR, the Helium Refrigeration System (HRS) had been operated for 4 months. In this period, four times of the emergency shutdown (ESD) were happened due to the various reasons. The recovery process from the ESD should be different depending on the temperature of KSTAR cold system and the HRS operating status. At each phase, recovery procedure and recovery period are different.