http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선내 곡률 반경에 적용 가능한 플렉서블 표면파 공진기 실험 연구
공진우(Jin-Woo Kong),이학곤(Hak-Gon Lee),김학선(Hak-Sun Kim),김부영(Bu-Young Kim),심우성(Woo-Seong Shim) 한국항해항만학회 2022 한국항해항만학회 학술대회논문집 Vol.2022 No.2
본 연구는 선박의 내부의 비금속 재질 등으로 인하여 표면파 공진기의 설치가 어려운 환경에서 이를 극복하는 방법으로 플렉서블기판을 이용한 표면파 공진기의 적용 가능성에 대하여 제작 및 실험을 통해 확인하였다. 설계 제작된 플렉서블 공진기의 곡면구조에서 실험한결과 평면구조에서 평면형 공진기보다 성능은 열화되지만, 곡면구조에서 평면형 공진기 대비 높은 전송속도를 확인하여 그 적용 가능성을 확인하였다. 본 실험을 통해 평면형 표면파 공진기가 부착되기 어려운 구조물에서도 금속체 표면파 통신이 가능할 것으로 생각되며, 선실 선교 등내부가 비금속 포장재로 되어 있는 공간에서도 내부의 연결된 금속 파이프를 통해 선박 전 구간에서 최적의 금속체 표면파 통신 구성이 가능할 것으로 생각한다. This study demonstrates the performance of flexible surface wave resonators in spaces on a ship to overcome environmental limits like non-metallic walls where conventional surface wave resonators cannot installable. Although test results in plane structures show that the performance of conventional surface wave resonators are better than the flexible ones, the results are reversed in curved structures. Flexible surface wave resonators can be installed on metal-pipes that connects all spaces in a ship, and this will allow to build ultimate communication network all over the ship including the rooms like cabins or bridges that are enclosed in non-metallic walls.
선박 밀폐 공간 무선통신 구현을 위한 표면파 통신의 선박 활용 연구
공진우(Jin-Woo Kong),송석근(Suk-Gun Song),김학선(Hak-Sun Kim),김부영(Bu-Young Kim),심우성(Woo-Seong Shim) 한국항해항만학회 2021 한국항해항만학회지 Vol.45 No.6
금속 표면을 매질로 하는 표면파 통신을 선박에 적용하여 무선통신 환경 구현이 어려운 선내 밀폐 공간을 극복하는 표면파 통신 기반의 선내 무선 통신 구현 기술에 관한 연구이다. 표면파 통신을 실제 선박에서 실험하기 위해 선교를 기준으로 선수창고, 갑판창고, 선실, 기관실, 화물창고 등 선박 내부 공간을 관통하는 경로를 대상으로 표면파 발생기를 설치하여 통신 속도 등을 측정하였다. 실험 결과, 각 구역에서 평균 13Mbps 수준의 통신 속도를 확인하였고, 기관실의 경우 정박 중 선박 엔진을 구동했을 시 4.3Mbps, 운항 중에 1.2Mbps의 전송속도 저하가 확인 되었지만, 시험 장비의 설치 위치를 기관실 입구로 변경하면 극복 가능함을 확인하였다. 완전 밀폐 환경인 선수 창고에서는 기존 무선통신보다 8Mbps 이상 높은 전송속도를 확인하여 철 구조물로 둘러싸인 선내 밀폐 공간에서 표면파 통신의 가능성을 확인하였고, 선박의 두꺼운 페인트 문제 해결을 위해 표면파 발생기를 추가 설계하여 적용하였다. 본 실험을 바탕으로 표면파 통신을 적용한 M-IoT 구현 등 선박 내 무선 네트워크 시스템 구현이 가능할 것으로 기대한다. This study suggests surface wave communication, which uses a metal surface as a medium, to provide wireless communication in the extreme environment due to surrounding metal materials on vessels. The test was conducted on a G/T 265 tons tug boat to confirm the possibility of surface wave communication between a bridge and each designated space in the ship. As a result, the transmission speed was 13Mbps on average. In a test case of the bridge via the engine room, the transmission speed was 4.3Mbps on engine running and 1.2Mbps on sailing. It overcame this by partially changing the equipment installation location. Surface wave communication in bow storage, a fully enclosed space, had 8Mbps better transmission speed than wireless communication; this confirmed the superiority of surface wave communication in confined spaces on a vessel. Additional surface wave generators were designed and applied to resolve the paint issue. It is expected to use surface wave communication to implement the new wireless solution for Maritime-IoT system on vessels.