http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주조 및 압출가공된 SiC입자강화 알루미늄복합재의 피로거동 및 피로수명에 대한 비교 연구
고승기,이경엽,Go, Seung-Gi,Lee, Gyeong-Yeop 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.3
The low-cycle fatigue behaviors of cast AI-Si alloy and composite with reinforcement of SIC particles were compared with those of extruded unreinforced matrix alloy and composite in order to investigate the influence of cast and extrusion processes on the cyclic deformation and fatigue life. Generally, both cast and extruded composites including the unreinforced alloy exhibited cyclic hardening behaviour, with more pronounced strain-hardening for the composites with a higher volume fraction of the SiC particles. However, cast composite under a low applied cyclic strain showing no observable plastic strain exhibited cyclic softening behavior due to the cast porosities. The elastic modulus and yield strength of the cast composite were found to be quite comparable to those of the extruded composite, however, the extrusion process considerably improved the ductility and fracture strength of the composite by effectively eliminating the cast porosities. Low-cycle fatigue lives of the cast alloy and composite were shorter than those of the extruded counterparts. Large difference in life between cast and extruded composites was attributed to the higher influence of the cast porosities on the fatigue life of the composite than that of the unreinforced alloy material. A fatigue damage parameter using strain energy density effectively represented the inferior life in the low-cycle regime and superior life in the high-cycle regime for the composite, compared to the unreinforced alloy.
외경에 홈을 지닌 자긴가공된 압력용기의 응력해석 및 피로수명평가
고승기 대한기계학회 1991 大韓機械學會誌 Vol.31 No.4
선형 탄성 유한요소 응력해석과 평균응력 효과를 고려한 저주기 피로실험으로부터 결정된 피로 특성, 그리고 국부변형률 방법을 종합하여 외경에 흠이 존재하는 자긴가공된 두꺼운 압력 용기의 피로수명이 평가되었다. 직사각형의 매우 날카로운 흠에서의 응력집중계수는 타원형 홈에서의 응력집중계수의 약 두배의 값이 얻어졌으며, 고강도 압력용기강인 ASTM A723의 저주기 피 로거동에 대한 평균응력 영향은 Morrow 및 SWT 파라메타를 이용하여 충분히 고려되었다. 균열발생이 예상되는 위험한 부분인 홈의 뿌리부분에서의 국부적인 응력, 변형률이 계산되었으며 예측된 피로수명은 실험적으로 얻어진 수명과 비교했을 때 2에서 4배의 오차를 보이면서 일치 하는 결과를 얻었다.
SiC입자강화 주조Al-Si복합재의 피로수명에 대한 인장평균변형률의 영향
고승기,Go, Seung-Gi 대한기계학회 1999 大韓機械學會論文集A Vol.23 No.11
The low-cycle fatigue behaviour of a SiC-particulate-reinforced Al-Si cast alloy with two different volume fractions has been investigated from a series of strain-control led fatigue tests with zero and nonzero tensile mean strains. The composites including the unreinforced matrix alloy, exhibited cyclic hardening behaviour, with more pronounced strain-hardening for the composites with a higher volume fraction of the SiC particles. For the tensile mean strain tests, the initial high tensile mean stress relaxed to zero for the ductile Al-Si alloy, resulting in no influence of the tensile mean strain on the fatigue life of the matrix alloy. However, tensile mean strain for the composite caused tensile mean stresses and reduced fatigue life. The pronounced effects of mean strain on the low-cycle fatigue life of the composite compared to the unreinforced matrix alloy were attributed to the initial large prestrain and non-relaxing high tensile mean stress in the composite with very limited ductility and Cyclic plasticity. Fatigue damage parameter using strain energy, density efficiently accounted for the mean stress effects. Predicted fatigue life using the damage parameter correlated fairly well with the experimental life within a factor of 3. Also, the fatigue damage parameter indicated the inferior life in the low-cycle regime and superior life in the high-cycle regime for the composite, compared to the unreinforced matrix alloy.
바우싱거 효과가 자긴가공된 압력용기의 잔류응력 분포에 미치는 영향
고승기 한국기계기술학회 2021 한국기계기술학회지 Vol.23 No.4
Application of a very high internal pressure on the thick-walled pressure vessel induces beneficial compressive tangential residual stresses near the bore of the pressure vessel after unloading the internal pressure. However, a reverse yielding due to the Bauschinger effect during the unloading process causes the reduction of the compressive residual stress near the bore. In order to evaluate the autofrettage residual stress distributions of the thick-walled pressure vessel, the Bauschinger effects were considered. Magnitudes of the compressive residual stresses at the bore determined by considering the Bauschinger effects decreased by about 25 percent, compared to the case of linear elastic unloading, i.e., without Bauschinger effects. Measured residual stress distributions agreed fairly well with the calculated distributions considering the Bauschinger effects.