http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RF 열플라즈마를 이용한 TEOS로 부터의 SiC 나노분말 합성
고상민,구상만,김진호,김지호,변명섭,황광택,Ko, Sang-Min,Koo, Sang-Man,Kim, Jin-Ho,Kim, Ji-Ho,Byeon, Myeong-Seob,Hwang, Kwang-Taek 한국세라믹학회 2011 한국세라믹학회지 Vol.48 No.1
Silicon carbide (SiC) has recently drawn an enormous industrial interest because of its useful mechanical properties such as thermal resistance, abrasion resistance and thermal conductivity at high temperature. RF Thermal plasma (PL-35 Induction Plasma, Tekna CO., Canada) has been utilized for synthesis of high purity SiC powder from cheap inorganic solution (Tetraethyl Orthosilicate, TEOS). It is found that the powders by thermal plasma consist of SiC with free carbon and amorphous silica ($SiO_2$) and, by thermal treatment and HF treatment, the impurities are driven off resulting high purity SiC nano-powder. The synthesized SiC powder lies below 30 nm and its properties such microstructure, phase composition, specific surface area and free carbon content have been characterized by X-ay diffraction (XRD), field emission scanning electron microscopy (FE-SEM), thermogravimetric (TG) and Brunauer-Emmett-Teller (BET).
아연 코팅된 스틸코드와 접착증진제가 적용된 고무 Compound와의 접착특성 연구
고상민 ( Sang Min Ko ),최희석 ( Hee Seok Choi ),손우정 ( Woo Jung Son ),강신정 ( Sin Jung Kang ) 한국 접착 및 계면학회 2014 접착 및 계면 Vol.15 No.2
본 연구에서는 아연 코팅 스틸코드와 접착증진제가 적용된 배합고무와의 접착 특성을 연구 하였다. 접착증진제로는 cobalt boroacylate (코발트 염), resorcinol-formaldehyde resin (RF resin) 그리고 hexamethoxymethylmelamine (HMMM)을 사용하였다. 코발트 염이 첨가된 배합고무에서는 코발트 염이 아연 코팅 스틸코드 표면에서 아연 황화물 성장을 촉진시켜 코발트 염이 포함되지 않은 배합고무에 비하여 pullout force가 증가하는 것을 확인하였다. 또한 코발트 염, RF resin과 HMMM을 모두 적용한 배합고무의 경우, 코발트 염은 아연 황화물 성장을 촉진시키고, RF resin과 HMMM은 배합고무의 modulus를 높여 고무 matrix로 성장한 아연 황화물을 더 강하게 interlocking하기 때문에 pullout force와 스틸코드의 고무 부착율이 가장 높게 나타난다는 것을 확인하였다. In this study, properties of adhesion between adhesion promoter-containing rubber compound and zinc coated steel cord was investigated. Cobalt salt, resorcinol formaldehyde resin (RF resin) and hexamethoxymethylmelamine (HMMM) were used to adhesion promoter. Since cobalt salts accelerate sulphidation rate of zinc at zinc coated steel cord surface, pullout force of rubber compound applying cobalt salts was increased compared to that of rubber compound without applying cobalt salts. Pullout force and rubber coverage of rubber compounds applying all adhesion promoters were superior because strong interlocking between rubber matrix increased modulus due to applying RF resin and HMMM and grown zinc sulfides at zinc coated steel cord surface.
고상민(Sang-Min Ko),황보환(Bo-Hwan Hwang),지용구(Yong-Gu Ji) 한국전자거래학회 2010 한국전자거래학회지 Vol.15 No.1
웹 2.0의 개념과 기술의 확산과 함께 페이스북, 마이스페이스, 유튜브, 트위터 등의 소셜네트워크서비스에 대한 사용이 증가하고 있다. 본 연구에서는 ‘사회적 자본 이론’을 기반으로하여 소셜네트워크서비스 사용으로 인해 형성되는 온라인 사회적 자본에 대한 조사를 수행하였다. 사용자들의 인구통계학적 정보와 소셜네트워크서비스 이용 동기 및 사용행태, 온라인 사회적 자본을 평가할 수 있는 설문문항을 구성하고 한국과 중국의 사용자들을 대상으로 설문조사를 진행하였다. 추가적으로 소셜 네트워크 서비스 이용을 통한 온라인 사회적 자본의 강도를 설명하기 위해 다중회귀분석을 수행하여 그 인과관계를 파악하고 결과를 제시하였다. 본 연구의 결과는 소셜네트워크서비스를 사용함으로써 형성되는 사용자들의 온라인 사회적 자본을 확인하고 서비스 기능과의 관계를 분석하여 제시함으로써 향후 서비스 개발에 있어 고려해야 할 속성들을 판단하는데 도움을 줄 수 있을 것으로 예상된다. In the past, the existing Internet service was used to simply gather information and show, with the development of Web 2.0 where everyone is allowed to access and share information. Since the development of the concept and the technology of the Web 2.0, the users of Social Network Service (SNS) such as Facebook, MySpace, Youtube, Twitter, etc., have been increasing. In this study, we researched into the Social Capital formed by using SNS based on “Social Capital Theory.” We constructed the survey to obtain the demographical information of the users, motive of using the SNS and the evaluation of the On-line Social Capital. The survey was aimed for the Korean and the Chinese. In addition, a multi-regression analysis was performed to explain the relationship between the function of Social Network Service and the Online Social Capital. The result of this study, presents a relationship between the Online Social Capital form and function of Social Network Service users. Therefore, the information obtained in this study can be applied when developing the service.
이승용,고상민,구상만,황광택,한규성,김진호,Lee, Seung-Yong,Ko, Sang-Min,Koo, Sang-Man,Hwang, Kwang-Taek,Han, Kyu-Sung,Kim, Jin-Ho 한국결정성장학회 2014 韓國結晶成長學會誌 Vol.24 No.5
2차원 흑연구조를 갖는 카본나노시트는 큰 비표면적과 우수한 전기적, 화학적 및 기계적 물성으로 인하여 미래소재로 각광받고 있다. 경제적이고 쉬운 카본나노시트의 양산공정개발을 위해 본 연구에서는 메테인($CH_4$)과 프로페인($C_3H_8$) 가스를 이용한 유도 열플라즈마 공정을 통해 기상 합성하여 카본나노시트 분말을 합성하였다. 유도 열플라즈마를 이용한 카본나노시트 합성은 촉매나 증착공정 없이 진행되었으며, 합성된 카본나노시트의 물성을 TEM, Raman, XRD, BET로 분석하였다. 메테인과 프로페인으로부터 합성된 카본 나노시트는 각각 5~6개의 그래핀 층과 15~16개의 그래핀 층으로 이루어진 분말로 합성되었으며 분말의 크기는 약 100 nm임을 확인할 수 있었다. An ultrathin sheet-like carbon nanostructure provides an important model of a two-dimensional graphite structure with strong anisotropy in physical properties. As an easy and cheap route for mass production, RF thermal plasma synthesis of freestanding carbon nanosheet from $CH_4$ (Methane) and $C_3H_8$ (Propane) is presented. Using vapor synthesis process with RF inductively thermal plasma, carbon nanosheets were obtained without catalysts and substrates. The synthesized carbon nanosheets were characterized using transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET) analysis. The carbon nanosheets synthesized using methane and propane generally showed 5~6 and 15~16 layers with a wrinkled morphology and size of approximately 100 nm.
이정영(Jeongyoung Lee),고상민(Sang Min Ko),김민종(Meenjong Kim),지용구(Yong Gu Ji),김훈태(Hoontae Kim) 한국전자거래학회 2018 한국전자거래학회지 Vol.23 No.4
축산업 분야는 대량적이고 밀집적인 생산이 가능하기 때문에 양돈․양계․오리를 중심으로 대규모 형태의 자본 집약적인 산업으로 빠르게 진행되고 있다. 하지만 전염병이 급격히 확산되면 축산업과 국민 생활에 심각한 위협이 될 수 있다. 이에 대비하기 위해 국가는 가축 방역 5단계에 맞추어 2013년 국가동물방역통합시스템(KAHIS)을 구축하여 운영하고 있다. 이에 따라 구축된 디지털화된 데이터와 정보는 관리의 용이성이 뛰어나지만, 유기적 연계를 통한 대책 마련이 쉽지 않다는 어려움이 지적되고 있다. 최근 사물인터넷(IoT), 빅데이터, 인공지능(AI) 등과 같은 제4차 산업혁명 시대의 기술이 빠르게 발전하면서 이를 도입하여 스마트 가축방역으로의 발전이 추진되고 있다. 이에 따라 본 연구는 5개 방역단계별로 국내외 4차 산업혁명 기술 적용현황을 조사하여 가까운 시일 내에 실천 가능한 후보 과제 13개를 도출하였다. 정책 수립의 우선순위를 확인하기 위하여 전문가 집단을 대상으로 조사하여 5개 방역단계의 우선순위와 각 단계별 우선순위를 조사하였다. 본 연구의 결과물은 스마트 가축방역 연구, 가축방역 분야의 선진화를 위한 정책 수립에 도움이 될 것으로 기대한다. With massive and dense production, the livestock industry is rapidly moving into a large-scale, capital-intensive industry especially in swine, poultry, and ducks. However, livestock epidemics can pose a serious threat to the livestock industry and the lives of the people. The government has established and operates the National Animal Protection and Prevention System (KAHIS) since 2013 in order to control the threat, in accordance with the five stages. The digitalized data and information are excellent in ease of management, but it is also pointed out that it is difficult to take countermeasures through linkage with the data in an emergency situation. Recently, the technology of the fourth industrial revolution such as Internet of Things (IoT), Big Data, Artificial intelligence (AI) has been rapidly implemented to the livestock industry, which makes smart livestock disease control system possible. Therefore, this study investigated the domestic and overseas cases which apply 4th Industrial Revolution technology in the industry, and derived 13 possible candidate tasks in the near future. In order to ascertain the priority of policy formulation, we surveyed the expert groups and examined the priority of each of the five stages of the prevention and the priority of each stage. The results of this study are expected to contribute to the establishment of policies for the advancement of smart livestock disease control research and livestock protection.
장기적 사용 측면에서 AI 스피커의 사용자 경험 평가 연구
정므엘(Meuel Jeong),고상민(Sang Min Ko) 한국HCI학회 2019 한국HCI학회 학술대회 Vol.2019 No.2
본 연구의 목적은 장기적인 관점에서 사용자의 경험을 회상하여 AI speaker 사용자의 의미 있고 중요한 이슈를 발굴하고, 평가하는 것이다. 본 연구는 장기적 측면에서 사용자 경험을 평가하는 UX Curve 와 사용자의 경험을 활성화 시키기 위한 기억인출 (Memory Retrieval)을 통해 AI speaker 에 대한 사용자 경험 평가를 수행하였다. 평가는 UX Curve 의 General, Attractiveness, Ease of use, Utility, Usage volume 의 5 가지 관점에서 진행하였다. 본 연구는 AI speaker 사용자 경험에 영향을 미치는 요인에 대한 연구인 동시에 발견된 이슈들을 통해 추후 정량적인 연구의 기반이 될 수 있다는 점에서 의의를 가진다.
Biomechanical Analysis of the Lower-Limb Exoskeleton (CEX) in Harvesting Task
Yong-Ku Kong(공용구),Kyeong-Hee Choi(최경희),Seoung-Yeon Kim(김승연),Min-Jung Kim(김민정),Sang-Soo Park(박상수),Jin-Woo Shim(심진우),Dong Jin Hyun(현동진),Kihyeon Bae(배기현),Jong Kyu Choi(최종규),Sang Min Ko(고상민),Min-Uk Cho(조민 대한인간공학회 2021 대한인간공학회 학술대회논문집 Vol.2021 No.6