http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강태준,김용협,김정길,이호영,이재상,이재형,한준희 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.
Aluminum (Al) thin films are used widely as an electronic material in a variety of applications because of their high conductivity,optical reflectance and low cost. In the present study, helium (He) and nitrogen (N2) ions were implanted in sputter-deposited Al thinfilms with different doses and energies, and the changes in the film properties, such as the surface roughness, optical reflectance,hardness and Young's modulus, were investigated. The results showed that the implantation of both ions smooth the surface of Al thinfilms by decreasing the hillock density, resulting in low global surface roughness. In particular, in the case of He ion implantation,the moderated degradation of optical reflectance was observed compared to the film implanted with nitrogen ion. On the other hand,excessive ion implantation increased the local (short-range) surface roughness, which deteriorated the optical reflectance of the Alfilms. The continuous stiffness measurement technique in nano-indentation showed that ion implantation increased the hardness nearthe surface. He ion implantation hardened the surface of the Al thin film, and almost 2 times higher surface hardness was achievedwith an ion dose of 1018 ions/cm2 at 40 KeV.
시스톨릭 어레이에 기반한 SADCT의 효율적 VLSl 구조설계
강태준,정의윤,권순규,하영호,Gang, Tae-Jun,Jeong, Ui-Yun,Gwon, Sun-Gyu,Ha, Yeong-Ho 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.38 No.3
본 논문에서는 시스톨릭 어레이에 기반한 모양 적응적 이산 여현 변환(SADCT)의 효율적 VLSI 구조를 제안한다. 모양 적응적 이산 여현 변환은 이산 여현 변환과 달리 변환 크기가 각 블록에서의 객체의 모양에 따라 가변적이므로 기존의 시간 순환구조에서는 각 처리소자의 이용도와 처리속도가 모두 저하된다. 본 논문에서는 이러한 단점을 극복하기 위해 메모리를 필요로 하지 않는 시스톨릭 어레이에 기반한 구조를 제안한다. 제안된 구조에서는 1차원 SADCT를 연속적으로 수행함으로 처리속도를 향상시키고 첫 번째 열의 처리소자들을 마지막 열의 처리소자들과 연결하고, 입력 데이터는 각각의 재배열된 블록에서의 최대 데이터 크기에 따라 각 열에 병렬로 입력하여 처리소자의 이용도를 향상시켰다. 제안된 구조는 VHDL로 기술하고 MentorTM를 이용하여 기능검증을 수행하였다. 검증결과, 하드웨어 복잡도가 다소 증가하나, 처리속도는 기존의 방법에 비해 두 배정도 향상되었다. In this paper, an efficient VLSI architecture of Shape Adaptive Discrete Cosine Transform(SADCT) based on systolic array is proposed. Since transform size in SADCT is varied according to the shape of object in each block, it are dropped that both usability of processing elements(PE´s) and throughput rate in time-recursive SADCT structure. To overcome these disadvantages, it is proposed that the architecture based on a systolic way structure which doesn´t need memory. In the proposed architecture, throughput rate is improved by consecutive processing of one-dimensional SADCT without memory and PE´s in the first column are connected to that in the last one for improvement of usability of PE. And input data are put into each column of PE in parallel according to the maximum data number in each rearranged block. The proposed architecture is described by VHDL. Also, its function is evaluated by MentorTM. Even though the hardware complexity is somewhat increased, the throughput rate is improved about twofold.
강태준,남기대,김유옥,윤영균,김상춘 ( Tae Jun Kang,Ki Dae Nam,Yu Ok Kim,Young Kyun Yun,Sang Chun Kim ) 한국공업화학회 1993 공업화학 Vol.4 No.3
올리고글리세를 모노라우레이트 에스테르류를 단계적인 합성 방법으로 monoglycerol monolaurate, diglycerol monolaurate, symmetrical triglycerol monolaurate 및 symmetrical tetraglycerol monolaurate 등을 85∼95%의 높은 수율로 각각 제조하였다. 그리고 이 화합물들에 대한 TLC 및 관크로마토그래피를 행하여 순수한 물질로 잘 분리 정제하였고, IR 및 ^1H NMR로 구조를 확인하였다. Defined oligoglycerol monolaurate esters were synthesized by means of step by step synthesis methods, and monoglycerol monolaurate, diglycerol monolaurate, symmetrical triglycerol monolaurate and symmetrical tetraglycerol monolaurate were obtained in a rate of 85∼95% yields. All the reacted products could be separated by means of column and thin layer chromatography, and the structure of products has been analyzed with IR, ^1H NMR spectra respectively.
사용자 중심의 클라우드 서비스 중개를 위한 AHP 기반의 기능적 요구사항 분석 방법
강태준 ( Taejun Kang ),박준석 ( Joonseok Park ),염근혁 ( Keunhyuk Yeom ) 한국정보처리학회 2014 한국정보처리학회 학술대회논문집 Vol.21 No.2
클라우드 서비스가 다양해지고 그 수가 급격히 증가하면서 클라우드 서비스 사용자에게 적합한 서비스를 제공하기가 어려워지고 있다. 이러한 문제를 해결하기 위해 서비스 사용자와 제공자 사이에서 클 라우드 서비스를 중개해주는 클라우드 서비스 브로커라는 개념이 제시되었다. 클라우드 서비스 브로커의 핵심적인 역할은 사용자의 요구사항에 적합한 서비스를 찾아주는 것이다. 그러나 현재 제시된 클라 우드 서비스 브로커 대부분은 클라우드 서비스 전문가의 도움으로 사용자의 요구사항을 분석하는 수동적인 과정이 수행되고 있으며,체계적으로 기능적 요구사항을 분석하는 과정이 미흡하다. 따라서 유사한 기능을 가지고 있는 클라우드 서비스들 중 사용자의 요구사항의 중요도를 분석해서 가장 근접한 서비스의 선택을 지원해 줄 수 있는 요구사항 분석 기법이 필요하다. 본 논문은 AHP(Analytic Hierarchy Process)의 쌍대비교법을 응용하여 클라우드 서비스에 대한 사용자의 기능적 요구사항을 분석하고 그 결과에 따라 클라우드 서비스를 선택하는 방법을 제시한다.