http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스트러트 인슐레이터 열화가 차량 소음에 미치는 영향에 관한 연구
손성현 ( Seong Hyun Son ),강성수 ( Sung Su Kang ),김국용 ( Gug Yong Kim ),박순철 ( Soon Cheol Park ) 한국고무학회 2010 엘라스토머 및 콤포지트 Vol.45 No.4
차량에서 스트러트 인슐레이터는 도로노면으로부터 발생하는 소음과 진동을 방지하는 역할을 한다. 대부분의 점탄성 마운트들은 고무로 되어있으며 천연고무가 주성분이다. 이러한 고무 부품들은 초기에는 제 역할을 하지만 오랜 시간 고온과 반복하중에 노출되면 성능저하가 일어난다. 고무성능 변화는 NVH를 떨어뜨리고 승차감을 저하시킨다. 본 연구에서는 차량실험을 통해 스프링 변위를 측정하였고, 재현실험에서 가속도 센서를 이용하여 운행거리와 차량연식에 따른 인슐레이터 고무성능을 가속도 값, 고무 영구 변형량, 경도를 나타내었다. Strut insulator in a vehicle is an important part to prevent noise and vibration which is created for driving on the road. Most of the viscoelastic-mounts are made of rubber and natural rubber is the key ingredient. These rubber products show well performance for the initial time, but they will degrade after they are exposed to a high temperature circumstance and a cyclic load. NVH performance and comfort in a vehicle were decreased by these degradation of the rubber. In this study, spring displacement in a vehicle was measured to make a profile in the simulation test performed with an acceleration sensor. In addition, acceleration level, rubber permanent deformation and hardness of the rubber were measured according to drive distance and vehicle model.
ROM 構造를 갖는 電流방식 COMS 回路에 依한 GF ( $2^m$ ) 上의 演算器 설계
유인권,성현경,강성수,김흥수,Yoo, In-Kweon,Seong, Hyeon-Kyeong,Kang, Sung-Su,Kim, Heung-Soo 대한전자공학회 1988 전자공학회논문지 Vol. No.
本 論文에서는 多値論理 函數를 계산하기 위해 GF ($2^m$)上의 元素生成, 加算, 裵算 및 除算에 대한 알고리듬을 제시하고 이 알고리듬에 의한 加算과 裵算의 결과를 ROM 構造의 電流방식 CMOS 回路로 設計하였다. 제시된 황算 알고리듬은 GF ($2^m$)上에서 多値論理 函數의 계산에 있어서 표조사방법이나 유클리드 알고리듬이 要하는 많은 양의 계산을 決數 m의 증가에 관계없이 범용 컴퓨터를 이용해 비교적 용이하게 처리할 수 있다. 또한 제시한 ROM 構造의 電流방식 CMOS 回路로 대칭적 多値論理値表 回路設計에 적합하고 GF ($2^m$)上의 加算 및 裵算을 동시에 실현할 수 있다. In this paper, it is presented element generation, addition, multiplication and division algorithm over GF ($2^m$) to calculate multiple-valued logic function. The results of addition and multiplication among these algorithms are applied to the current mode CMOS circuits with ROM structure to design of adder and multiplier on GF ($2^m$). Table-lookup and Euclid's algorithm are required the computation in large quentities when multiple-valued logic functions are developed on GF ($2^m$). On the contrary the presented operation algorithms are prefered to the conventional methods since they are processed without relation to increasing degree m in the general purpose computer. Also, the presened logic circuits are suited for the circuit design of the symmetric multiplevalued truth-tables and they can be implemented addition and multiplication on GF ($2^m$) simultaueously.
정원욱,정연수,강성수,Jeong, Won-Uk,Jeong, Yeon-Su,Kang, Seong-Su 대한기계학회 1998 大韓機械學會論文集A Vol.22 No.3
Vehicle body structures are formed by thousands of spot welds and fatigue failure of vehicle structures occur near the spot welds after driving a long way at a durability test road. It is necessary to know accurately the reason of the fatigue failure of the spot weld in the developing stage in order to reinforce it. Many investigations have been done regarding the strength of spot welded joints, contributing to understand its fatigue strength. In developing process, a fatigue failed spot welded area can be repaired by $CO_2$ welding or another method to continue the test. To know the effect of reinforcing these welds, several methods of welding were analyzed and compared to spot welding. With the results of this test, the appropriate repair method can be used instead of spot welding during the development of new car and best design guide can be given for the strength. In this study, fatigue and static tensile tests are made and microstructure is investigated for the purpose of estimating the strength of welded joints by using spot welded and $CO_2$ plug welded specimens. The tested specimens are of two types : Tensile-shear type(TS) and L-tension type(LT).
토끼의 관절병증에 미치는 SCAN-BIO 레이저의 치료효과
조형진,김영수,오동민,심경미,강성수,임성철,조용성,이수한,최석화,배춘식,Cho, Hyung-Jin,Kim, Young-Su,Oh, Dong-Min,Sim, Kyung-Mi,Kang, Seong-Soo,Lim, Sung-Chul,Cho, Yong-Seong,Lee, Soo-Han,Choi, Seok-Hwa,Bae, Chun-Sik 대한수의학회 2004 大韓獸醫學會誌 Vol.44 No.3
For the induction of arthropathy, 4% hydrogen peroxide ($H_2O_2$) was injected for 4 weeks into the intra-articular space of the 25 New Zealand white rabbits to damage articular cartilage. The verification of arthropathy induction and the effect of scan-bio laser treatment were determined by measuring superoxide dismutase (SOD) activity, by observing gross and histopathologic findings. The SOD activity increased by about 40% in arthropathy group, as compared to controls. Although SOD activity in arthropathy group was not significantly different from the 2-week group, it was significantly different from the 4-week control and treatment groups. There was also a significant difference between the 4-week control and treatment groups. Grossly, erosions formed on the articular cartilage surface, and the lateral femoral condyle was damaged in arthropathy group. In comparison, there was slight, but not significant, progression of the lesion in the 2-week control group, and no difference between the 2-week treatment and control groups. Conversely, severe erosions damaged the articular cartilage in the 4-week control group. Cartilage proliferation was seen in gross observations in the 4-week treatment group, suggesting a treatment effect. Histopathologically, there was slight articular surface damage and apoptosis in arthropathy group, and serious cartilage damage, despite slight chondrocyte proliferation, in the 4-week control group. By contrast, the 4-week treatment group showed chondrocyte replacement, with close to normal articular cartilage on the articular surface. There was significant cartilage proliferation with regeneration of the articular cartilage on the articular surface in the group treated with low-level laser, as compared to control group, when arthropathy was induced by $H_2O_2$ injections. Therefore, low-level laser was effective in the treatment of chemically induced arthropathy.
지구온난화 대응을 위한 CDR(Carbon Dioxide Removal) 기술 - 바이오차를 중심으로 -
이종문(Jong-Mun Lee),강성수(Seong-Su Kang),최은정(Eun-Jung Choi),권효숙(Hyo-Suk Gwon),이형석(Hyoung-Seok Lee),이선일(Sun-Il Lee) 한국토양비료학회 2021 한국토양비료학회 학술발표회 초록집 Vol.2021 No.11
이산화탄소(Carbon dioxide, CO₂)는 대표적인 온실가스로써 2019년 기준 평균 농도는 410.5±0.2ppm이고, 2009년부터 2019년까지 연평균 2.37ppm yr<SUP>-1</SUP> 증가하였다. 이에 따라 기후변화 관련 정부간 협의체(Intergovernmental Panel on Climate Change, IPCC)에서는 CDR(Carbon dioxide removal) 기술을 제시하였고, 최근 바이오차 적용을 통한 탄소제거 기술이 추가되었다. 따라서 본 연구는 CDR 기술과 최근 추가된 바이오차와 관련한 연구들을 검토하여 바이오차 현안과 시사점을 도출하고자 하였다. CDR 기술은 대기 중 탄소를 제거하는 기술로써, BECCS(Bioenergy with carbon capture and storage), AR(Afforestation and reforestation), EW(Enhanced weathering), Biochar, SCS(Soil Carbon Sequestration) 등 총 5가지 기술을 제시하고 있다. 이중 바이오차는 바이오매스를 산소가 없는 환경에서 열분해하여 만든 탄소 함량이 높은 고형물로, 토양 미생물에 의해 쉽게 분해되지 않기 때문에 토양에 투입하면 탄소를 반영구적으로 토양에 격리할 수 있다. 2050년 바이오차의 글로벌 잠재력은 0.3-2 Gt CO₂ y<SUP>-1</SUP>으로 추정되며, 추가적으로 아산화질소(Nitrous oxide, N₂O) 배출량 감축과 토양개선 효과가 보고된 바 있다. 하지만, 이를 제거하기 위해서는 16-100 Mha의 토지가 필요하며, 바이오차 생산을 위해 30-120 $ t CO₂<SUP>-1</SUP>가 필요할 것으로 보고되었다. 바이오차는 토양유형 및 관리, 환경적 특성에 따라 수십년에서 수백년까지 토양 내 격리될 수 있는 잠재력을 가지고 있다. 따라서, 향후 바이오차와 관련한 다양한 변수들의 정량적인 연구가 필요할 것으로 판단된다. 더불어 원활한 공급을 위한 재료 개발과 생산에 따른 에너지 및 비용을 절감할 수 있는 방안 마련 연구가 필요할 것으로 사료된다.
이종문(Jong-Mun Lee),강성수(Seong-Su Kang),최은정(Eun-Jung Choi),권효숙(Hyo-Suk Gwon),이형석(Hyoung-Seok Lee),유예슬(Ye-Seul Yu),조정일(Jung-Il Cho),이선일(Sun-Il Lee) 한국토양비료학회 2021 한국토양비료학회 학술발표회 초록집 Vol.2021 No.11
최소경운 재배는 농경지에서 경운 시 손실되는 양분을 최소화하며, 온실가스 배출을 줄일 수 있는 기술로써 주목 받고 있다. 이러한 기술을 국내 농경지 중 면적 비중이 높은 논에 적용한다면 국가 온실가스 감축목표 달성에 이바지할 수 있을 것이다. 따라서 본 연구는 벼 재배 시 최소경운 농법 적용에 따라 방출되는 온실가스(N₂O, CH₄) 배출 특성을 평가하였으며, 더불어 벼 생육 시기별 온실가스 배출량을 비교·분석하였다. 연구는 농가에서 직접 재배하는 논(35° 48’ 37.4”N, 126° 50’ 34.4”E)을 대상으로 실시하였다. 시험구 처리는 경운 여부에 따라 최소경운 (Minimum-tillage, MT) 처리구와 관행경운 (Conventional tillage, CT) 처리구로 구분하여, 주 1회 이상 온실가스 배출량을 조사하였다. 벼 재배 기간 중 초기 82일간의 온실가스 배출량을 분석한 결과, 활착기, 중간물떼기, 물걸러대기, 출수기 중 상대적으로 중간물떼기 직후 온실가스 배출량이 높은 것으로 나타났다. 약 3주간의 중간물떼기 기간 동안 N₂O 배출량의 경우, CT와 MT에서 각각 22.5±6.5 mg m<SUP>-2</SUP>, 24.3±17.1 mg m<SUP>-2</SUP>로 나타났으며, CH₄ 배출량은 각각 2.7±0.5 g m<SUP>-2</SUP>, 2.7±0.7 g m<SUP>-2</SUP>로 분석되었다 (p<0.05). 출수기까지 누적 N₂O 배출량은 CT에서 28.2±10.0 mg m<SUP>-2</SUP>, MT에서 18.1±21.8 mg m<SUP>-2</SUP>로 MT 처리구에서 낮게 나타났으나, 유의미한 차이는 없는 것으로 분석되었다. 누적 CH₄ 배출량은 CT에서 5.2±0.3 g m<SUP>-2</SUP>, MT에서 4.6±1.0 g m<SUP>-2</SUP>로 MT 처리구에서 유의미하게 낮은 것으로 분석되었다 (p<0.05). 따라서, 최소경운 재배를 통해 약 13%의 CH₄ 가스를 줄일 수 있는 것으로 분석되었다. 국내 논에서 관행 시 되고 있는 경운방식을 최소화함으로써 대기 중으로 직접 배출되는 온실가스를 저감할 수 있을 것으로 판단된다. 향후 수확기까지 온실가스 배출량을 모니터링하여 최소경운을 통한 정량적인 온실가스 감축 효과를 검증할 것이다. 또한, 향후 벼 생육기간 이외의 휴경기간까지를 포함하여 온실가스 배출량을 평가하는 연구가 필요할 것으로 사료된다.