고압하에서의 Al-4.5wt.%Cu 합금의 응고현상

조인성,홍준표 ( In Sung Cho,Chun Pyo Hong ) 한국주조공학회 1995 한국주조공학회지 Vol.15 No.2

N/A Solidification of aluminum alloys under moderate pressures has been investigated. Interfacial heat transfer coefficient at the casting/mold interface varies with time after pouring the molten metal into the die cavity, and therefore plays an important role in determining solidification sequence. The heat transfer coefficients were evaluated by using an inverse problem method, based on the measured temperature distribution. The calculated heat transfer coefficients were used for solidification simulation in the squeeze casting process. The effects of applied pressure and positions of insulation in the mold have also been investigated on solidification microstructures and on the formation of macrosegregation of Al-4.5wt.%Cu alloys.

SOLA-VOF 법에 의한 정밀 주형내 용탕흐름의 수치 모델링

조인성,홍준표 ( In Sung Cho,Chun Pyo Hong ) 한국주조공학회 1992 한국주조공학회지 Vol.12 No.5

N/A A numerical model based on the SOLA-VOF method, which can calculate the transient free-surface configuration of the melt, has been developed in order to analyze melt flow in the investment mold. The computational results were compared with experimental results obtained from pure aluminum investment casting. Heat transfer analysis, with and without consideration of melt flow effect has been performed. It can be concluded that analysis of melt flow in the investment mold, provides the optimum conditions for gating design. It also enables more precise solidification simulation, since heat loss, while filling the thin and complex investment mold, plays an important role in determining the solidification sequence.

주조공정 데이터 처리 및 분석 (1)

조인성,Cho, In-Sung 한국주조공학회 2022 한국주조공학회지 Vol.42 No.1

In the present paper, the data management of casting processes has been discussed. In order to construct a smart factory in the foundry industry, understanding of the whole casting processes has to be in the first place. Casting process data can be obtained at the kiosk operated by casting engineers and data acquired by sensors in the foundry facility. However, preprocessing of the casting process data must be carried out in order to analyze the casting process by the data. Techniques and some examples for data preprocessing in the foundry was introduced.

용탕단조시 Al-4.5wt%Cu 합금의 조직예측

조인성,홍준표,이호인 ( In Sung Cho,Chun Pyo Hong,Ho In Lee ) 한국주조공학회 1996 한국주조공학회지 Vol.16 No.6

N/A A stochastic model, based on the coupling of the finite volume(FV) method for macroscopic heat flow calculation and a two-dimensional cellular automaton(CA) model for treating microstructural evolution was applied-for the prediction of microstructural evolution in squeeze casting. The interfacial heat transfer coefficient at the casting/die interface was evaluated as a function of time using an inverse problem method in order to provide a quantitative simulation of solidification sequences under high pressure. The effects of casting process variables on the formation of solidification grain structures and on the columnar to equiaxed transition of an Al-4.5wt%Cu alloy in squeeze casting were investigated. The calculated solidification grain structures were in good agreement with those obtained experimentally.

원전 코호트 연구의 적정 대상규모와 검정력 추정

조인성,송민교,최윤희,이충민,안윤옥,Cho, In-Seong,Song, Min-Kyo,Choi, Yun-Hee,Li, Zhong-Min,Ahn, Yoon-Ok 대한예방의학회 2010 Journal of Preventive Medicine and Public Health Vol.43 No.6

Objectives: The objective of this study was to calculate sample size and power in an ongoing cohort, Korea radiation effect and epidemiology cohort (KREEC). Method: Sample size calculation was performed using PASS 2002 based on Cox regression and Poisson regression models. Person-year was calculated by using data from '1993-1997 Total cancer incidence by sex and age, Seoul' and Korean statistical informative service. Results: With the assumption of relative risk=1.3, exposure:non-exposure=1:2 and power=0.8, sample size calculation was 405 events based on a Cox regression model. When the relative risk was assumed to be 1.5 then number of events was 170. Based on a Poisson regression model, relative risk=1.3, exposure:non-exposure=1:2 and power=0.8 rendered 385 events. Relative risk of 1.5 resulted in a total of 157 events. We calculated person-years (PY) with event numbers and cancer incidence rate in the nonexposure group. Based on a Cox regression model, with relative risk=1.3, exposure:non-exposure=1:2 and power=0.8, 136 245PY was needed to secure the power. In a Poisson regression model, with relative risk=1.3, exposure:non-exposure=1:2 and power=0.8, person-year needed was 129517PY. A total of 1939 cases were identified in KREEC until December 2007. Conclusions: A retrospective power calculation in an ongoing study might be biased by the data. Prospective power calculation should be carried out based on various assumptions prior to the study.

$Fe^{2+}$와 $H_2O_2$에 의한 Hyaluronic Acid, Lipid와 Collagen의 산화성 손상에 나타내는 Harmaline과 Harmalol의 영향

조인성,신용규,이정수,Cho, In-Sung,Shin, Yong-Kyoo,Lee, Chung-Soo The Korean Society of Pharmacology 1995 대한약리학잡지 Vol.31 No.3

Harmaline을 포함한 ${\beta}-Carboline$ 알카로이드들은 마이크로조움의 효소성 또는 비효소성 지질 과산화를 억제한다고 제시되고 있으나, 이들의 항산화 작용기전은 분명하지 않다. 본 연구에서는 $Fe^{2+}$와 $H_2O_2$에 의한 hyaluronic acid, 지질과 콜라젠의 산화성 손상에 있어 harmaline과 harmalol의 항산화 능력을 관찰하였다. 또한 반응성 산소대사물에 대한 이들의 제거작용을 조사하였다. Harmaline, harmalol, superoxide dismutase, catalase와 DMSO는 $Fe^{2+}$와 $H_2O_2$에 의한 hyaluronic acid의 변성과 $Fe^{2+}$에 의한 지질 과산화를 억제하였다. 이들 반응에서 DABCO는 hyaluronic acid의 변성을 억제하였으나 지질 과산화에 영향을 나타내지 않았다. ${\beta}-Carboline$은 $Fe^{2+}$, $H_2O_2$와 ascorbic acid에 의한 cartilage collagen의 변성을 억제하였다. Superoxide dismutase에 의하여 억제되는 $Fe^{2+}$의 자가산화에 따른 ferricytochrome c의 환원은 harmaline과 harmalol의 영향을 받지 않았다. 또한 이들은 $H_2O_2$에 대하여 분해작용을 나타내지 않았다. $Fe^{2+}$와 $H_2O_2$의 존재하에서 OH 생성은 harmaline, harmalol과 DMSO에 의하여 억제되었다. Harmaline과 harmalol은 반응성 산소대사물인 OH 과 아마도 철이온-산소 복합체에 대한 제거작용으로써 $Fe^{2+}$와 $H_2O_2$에 의한 hyaluronic acid, 지질과 콜라젠의 산화성 손상을 억제하고, 항산화 능력을 나타낼 것으로 추정된다. ${\beta}-Carboline$ alkaloids including harmaline have been shown to inhibit enzymatically or nonenzymatically induced-lipid peroxidation of microsomes. This study was done to explore the antioxidant ability of harmaline and harmalol on the oxidative injuries of hyaluronic acid, lipid and collagen by $Fe^{2+}$ and $H_2O_2$. Their scavenging actions on reactive oxygen species were also examined. Harmaline, harmalol, superoxide dismutase, catalase and DMSO inhibited both degradation of hyaluronic acid by $Fe^{2+}$ and $H_2O_2$ and lipid peroxidation of microsomes by $Fe^{2+}$. In these reactions, DABCO inhibited degradation of hyaluronic acid but did not affect lipid peroxidation. ${\beta}-Carbolines$ inhibited degradation of cartilage collagen by $Fe^{2+}$, $H_2O_2$ and ascorbic acid. The reduction of ferricytochrome c due to autoxidation of $Fe^{2+}$, which is inhibited by superoxide dismutase, was not affected by harmaline and harmalol. They also did not have a decomposing action on $H_2O_2$. Hydroxyl radical production in the presence of $Fe^{2+}$ and $H_2O_2$ was inhibited by harmaline, harmalol and DMSO. Harmaline and harmalol may inhibit the oxidative injuries of hyaluronic acid, lipid and cartilage collagen by $Fe^{2+}$ and $H_2O_2$ through their scavenging actions on reactive oxygen species, OH and probably iron-oxygen complexes and exert antioxidant abilities.

최우정권하의 문한관 - 능문 , 능이 의 인사기준을 중심으로 -

조인성(In Sung Cho) 서강대학교 동아연구소 1985 東亞 硏究 Vol.- No.6

N/A

천공홀 가압 팽창 개념을 도입한 터널 보조 신공법 연구

조인성,박정준,김종선,이인모,Cho, In-Sung,Park, Jeong-Jun,Kim, Jong-Sun,Lee, In-Mo 한국터널지하공간학회 2010 한국터널지하공간학회논문집 Vol.12 No.6

A new tunnel auxiliary method is proposed in this paper which utilizes the concept of cavity expansion for tuunel reinforcement by forming an umbrella arch on the roof of tunnel. When an inflatable pipe is inserted and expanded by pressure in the bore hole of umbrella arch, the ground around the bore hole can be compacted so that the stress condition above the tunnel perimeter is favorably changed. In order to verify the reinforcement effect of new concept, pilot-scale chamber test, trapdoor test and numerical analysis were performed and compared. In pilot-scale chamber test, three types of inflatable pipes are tested to verify the capability of expansion, and the results arc compared with analytical results obtained by applying cavity expansion theory and with results obtained from finite clement analysis, and the experimental results showed agreeable matches with analytical and numerical ones. Numerical analysis of a tunnel and trapdoor test applied with the inflatable pipes are also performed to figure out the reinforcement effect of the proposed techniques, and the results implied that the new method with 3 directional inflatable pipe (no pressure to downward direction) can contribute to reduce tunnel convergence and face settlement. 현재 널리 적용되고 있는 대표적인 터널보조공법인 강관다단그라우팅공법은 그라우팅 기술을 도입하여 지반의 물성치를 개선하는 개념이나, 풍화토 지반조건에서는 그라우트재 주입 시 입자의 막힘현상으로 주입범위가 극히 제한되어 계획했던 보강 범위 형성이 어려운 문제가 있다. 본 연구에서는 천공홀 가압 팽창 개념을 도입하여 터널 막장면에 Umbrella Type으로 천공홀을 설치하고 팽창형 강관을 삽입하여 터널을 보강하는 신공법에 대한 연구를 수행하였다. 신공법은 삽입된 강관을 팽창시킴으로서 주변 지반 다짐으로 인한 지반응력상태 변화를 유도하고 이로 인하여 터널 굴착에 의한 지반 거동을 안정하게 하는 공법이다. 본 연구에서는 천공홀 팽창으로 인한 주변 지반의 거동을 연구하기 위해서 챔버모형을 실시하였다. 세 가지 형태의 시험적인 팽창관에 대해 팽창 실험을 실시하여 천공홀 벽면에서의 응력과 변위를 이론과 챔버모형실험을 모델링한 수치해석 결과와 실험결과를 비교하였으며, 그 결과가 유사한 것을 확인하였다. 신공법의 터널 보강 효과를 평가하기 위하여 신공법과 강관다단그라우팅공법을 적용한 2차원 터널 수치해석과 Trapdoor 모형토조실험을 수행하였으며, 수치해석 결과와 실험 결과에서 모두 삼방향 팽창형 강관(하부 방향 무가압) 신공법을 적용하였을 경우에 터널 굴착 시 내공변위가 감소하는 결과를 보여주어 신공법의 적용가능성을 확인하였다.

독일 CO₂ 저장법(KSpG)상 집중효 제도와 그 시사점

조인성(Cho, In-Sung) 한양법학회 2015 漢陽法學 Vol.26 No.1

TV-CM에서 나타난 멀티스팟(multi spot)광고의 활용성에 관한 고찰

조인성(Cho, In-Sueng) 한국전시산업융합연구원 2006 한국과학예술융합학회 Vol.2 No.-