MPEG-2 AAC Encoder의 심리음향 모델 최적화

박종태,문규성,이강현,Park, Jong-Tae,Moon, Kyu-Sung,Rhee, Kang-Hyeon 대한전자공학회 2001 電子工學會論文誌-CI (Computer and Information) Vol.38 No.2

최근 멀티미디어 분야 중에서 가장 중요한 기술 중의 하나가 압축이다. 오디오 파일들은 인터넷을 중심으로 급속히 전파되어가고 있으며, 그 중에서 가장 유명한 것이 MP-3(MPEC-1 Layer3)인데, MP-3는 128Kbps에서 CD음질을 얻을 수 있지만 64Kbps 이하에서는 음질이 급속히 떨어진다. 반면에 MPEG-2 AAC(Advanced Audio Coding)는 MPEG-1과 호환성을 무시하지만 MP 3보다 1.4배의 높은 압축 율을 갖으며, 최대 7.1채널과 96KHz의 샘플 율을 갖는다. 본 논문에서는 MPEG-2 AAC 인코더 부분에서 막대한 연산 량을 갖는 심리음향 모델을 최적화하여 AAC 인코딩 연산 량을 감소시키며 처리속도를 증가하는 알고리즘을 제안한다. 심리음향 모델 최적화 응용 프로그램은 C++언어를 이용하여 구현하였으며, 실험결과 심리음향 모델은 SMR(Signal to Masking Ratio)을 위하여 44.1KHz의 샘플 율을 갖고 2048포인트의 FFT(Fast Fourier Transform)연산을 수행하며, 인코더 블록의 제어를 위하여 서브밴드 필터에 각각의 엔트로피 값들이 입력된다. 제안된 심리음향 모델은 비 예측성 값의 최적화로 인하여 빠른 속도로 수행되었다. 또한 비 예측성 값을 순음지수로 변화 시, 고 주파수 영역의 순음지수 값의 최적화로 연산처리 속도가 증가하였다. Currently, the compression is one of the most important technology in multimedia society. Audio files arc rapidly propagated throughout internet Among them, the most famous one is MP-3(MPEC-1 Laver3) which can obtain CD tone from 128Kbps, but tone quality is abruptly down below 64Kbps. MPEC-II AAC(Advanccd Audio Coding) is not compatible with MPEG 1, but it has high compression of 1.4 times than MP 3, has max. 7.1 and 96KHz sampling rate. In this paper, we propose an algorithm that decreased the capacity of AAC encoding computation but increased the processing speed by optimizing psychoacoustic model which has enormous amount of computation in MPEG 2 AAC encoder. The optimized psychoacoustic model algorithm was implemented by C++ language. The experiment shows that the psychoacoustic model carries out FFT(Fast Fourier Transform) computation of 3048 point with 44.1 KHz sampling rate for SMR(Signal to Masking Ratio), and each entropy value is inputted to the subband filters for the control of encoder block. The proposed psychoacoustic model is operated with high speed because of optimization of unpredictable value. Also, when we transform unpredictable value into a tonality index, the speed of operation process is increased by a tonality index optimized in high frequency range.

소지역 추정법에 관한 비교연구

박종태,이상은,Park, Jong-Tae,Lee, Sang-Eun 한국데이터정보과학회 2001 한국데이터정보과학회지 Vol.12 No.2

직접(direct) 추정법, 합성(synthetic) 추정법, 복합(composite) 추정법, 베이즈(Bayes) 추정법 등 소지역 추정법들의 효율성을 비교, 분석하고자 '98 경제활동 인구조사에서 경기도의 실제 자료를 이용하여 각 시부지역의 실업자수 추정값의 편의(bias)와 평균제곱 오차(MSE)를 모의실험을 통해 계산하였다. Usually estimating the means is used for statistical inference. However depending the purpose of survey, sometimes totals will give the better and more meaningful in statistical inference than the means. Here in this study, we dealt with the unemployment population of small areas with using 4 different small area estimation methods: Direct, Synthetic, Composite, Bayes estimation. For all the estimates considered in this study, the average of absolute bias and men square error were obtained in the Monte Carlo Study which was simulated using data from 1998 Economic Active Population Survey in Korea.

이황화탄소 폭로가 혈압에 미치는 영향에 관한 분석적 연구

박종태,김해준,염용태,백도명,Park, Jong-Tae,Kim, Hae-Joon,Yum, Yong-Tae,Paek, Do-Myung 대한예방의학회 1994 Journal of Preventive Medicine and Public Health Vol.27 No.3

To investigate the effect of carbon disulfide on blood pressure, the BP measurements in the periodic health examination results and the medical records of factory clinic were reviewed. The study subjects were composed of 1336 male and 544 female workers, who were categorized into three groups by the exposure status-highly exposed, moderately exposed and non-exposed group. The results of the study were as follows; 1. The age-adjusted mean systolic and diastolic BP of male workers were 122.35 mmHg/79.11 mmHg in highly exposed, 121.57mmHg/79.05mmHg in moderately exposed and 122.67mmHg/82.27mmHg in non-exposed group. For female workers, BPs were 115.13mmHg/74.49mmHg in moderately exposed and 113.48mmHg/74.30mmHg in non-exposed group. 2. In multiple regression analysis of maximum BP against Age and tenure, the slope coefficients of age and tenure on the systolic BP were 0.379, 0.667 respectively and those on the diastolic BP were 0.331, 0.405 respectively in highly exposed male workers. Tenure was a significant variable in this study. For female workers, however the slope coefficients of tenure on BP were significant only for systolic BP of moderately-exposed group. 3. In multiple regression analysis of Bp against age, cumulative exposure index (CEI), cholesterol, all the variables showed significant slope coefficients in male, but age and CEI on systolic BP were significant for female workers (p<0.05). 4. In the multiple analysis of the amount of Bp change and the velocity of Bp change among male workers, the slope coefficients of tenure tended to increase as exposure level increased. Among female workers, the slope coefficients of tenure were significant on the amount of Bp change and the velocity of Bp change in moderately exposed group.

The Electrical Properties of Polycrystalline Silicon Resistors

박종태,최민성,이문기,김봉렬,Park, Jong Tae,Choi, Min Sung,Lee, Moon Key,Kim, Bong Ryul The Institute of Electronics and Information Engin 1986 전자공학회논문지 Vol.23 No.6

High value sheet resistance (Rs, 350\ulcorner/ -80K\ulcorner/) born implanted polysilicon resistors were fabricated under process conditions compatible with bipolar integrated circuits fabrications. This paper includes studies of sensitivity of Rs to doping concentration, the effect of thermal annealing temperature on Rs, temperature coefficient of resistance (TCR), the effect of polysilicon thickness on Rs and the Rs variation within a run and between runs.

수정된 유클리드 알고리즘을 이용한 RS부호화기/복호화기 설계

박종태,Park Jong-Tae 한국정보통신학회 2004 한국정보통신학회논문지 Vol.8 No.7

디지털 통신망을 통한 정보 송수신시 전송로 상에서의 잡음으로 인해 데이터 블록에 발생하는 오류는 전체 통신 시스템의 성능 및 전송효율에 지대한 영향을 미친다. 설계된 RS 코드 복호기는 오류 위치 다항식과 오류평가 다항식을 구하기 위해 수정된 유클리드 알고리즘을 적용하였다. 본 논문에서 적용된 설계 구조와 알고리즘 계산 방식은 복호기 설계시 1개의 셀을 사용하여 면적을 최소화하고, 연산을 ROM과 병렬 구조로 구성하였기 때문에 높은 동작주파수에서 고속 동작을 실현 할 수 있을 것이라 기대된다. 본 논문에서 설계된 회로는 ModelSim과 Active-HDL 그리고 Synopsys Tool상에서 설계되었으며, Xilinx Virtex2 XC2V3000에 PNR시 slice 점유율은 28% 시스템 클럭 스피드는 45Mhz의 결과를 얻었다. The error control of digital transmission system is a very important subject because of the noise effects, which is very sensitive to transmission performance of the digital communication system It employs a modified Euclid's algorithm to compute the error-location polynomial and error-magnitude polynomial of input data. The circuit size is reduced by selecting the Modified Euclid's Algorithm with one Euclid Cell of mutual operation. And the operation speed of Decoder is improved by using ROM and parallel structure. The proposed Encoder and Decoder are simulated with ModelSim and Active-HDL and synthesized with Synopsys. We can see that this chip is implemented on Xilinx Virtex2 XC2V3000. A share of slice is 28%. nut speed of this paper is 45Mhz.

Hot Issue-IP Protection 기술적보호와 법률적보호에 관하여

박종태,Park, Jong-Tae IT-SOC협회 2005 IT SOC magazine Vol.7 No.-

저작권법상의 저작물이란“문학∙학술 또는 예술의 범위에 속하는 창작물”을 말하며, 저작물성의 판단에 있어서 가장 중요한 점은 창작성이 있는지 여부인데, 우리나라의 학설 및 판례에 따르면 저작권법상의 창작성이란 단지 남의 것을 베끼지 않은 것으로서 창작자 자신의 개성이 들어나면 족한 것으로 보고 있으므로, 창작성이 인정되는 IP의 경우에는 저작권법상의 어문저작물 또는 설계도 등에 해당하는 저작물로 볼 여지가 있다.

빅데이터 분석 적용을 통한 공정 최적화 사례연구: LCD 공정 품질분석을 중심으로

박종태,이상곤,Park, Jong Tae,Lee, Sang Kon 한국IT서비스학회 2022 한국IT서비스학회지 Vol.21 No.2

Recently, interest in smart factories is increasing. Investments to improve intelligence/automation are also being made continuously in manufacturing plants. Facility automation based on sensor data collection is now essential. In addition, we are operating our factories based on data generated in all areas of production, including production management, facility operation, and quality management, and an integrated standard information system. When producing LCD polarizer products, it is most important to link trace information between data generated by individual production processes. All systems involved in production must ensure that there is no data loss and data integrity is ensured. The large-capacity data collected from individual systems is composed of key values linked to each other. A real-time quality analysis processing system based on connected integrated system data is required. In this study, large-capacity data collection, storage, integration and loss prevention methods were presented for optimization of LCD polarizer production. The identification Risk model of inspection products can be added, and the applicable product model is designed to be continuously expanded. A quality inspection and analysis system that maximizes the yield rate was designed by using the final inspection image of the product using big data technology. In the case of products that are predefined as analysable products, it is designed to be verified with the big data knn analysis model, and individual analysis results are continuously applied to the actual production site to operate in a virtuous cycle structure. Production Optimization was performed by applying it to the currently produced LCD polarizer production line.

검사 용이화를 위한 VHDL의 동작기술 합성에 관한 연구

박종태,최현호,허형팔,Park, Jong-Tae,Choi, Hyun-Ho,Her, Hyong-Pal 대한전자공학회 2002 電子工學會論文誌 IE (Industry electronics) Vol.39 No.4

본 논문은 검사 용이화를 위하여 VHDL을 이용하여 설계를 할 때, 상위 수준 합성 방법에서 자체검사가 가능한 데이터 경로 구조를 자동으로 합성할 수 있는 알고리즘을 제안하였다. 그리고 MUX와 레지스터는 본 논문에서 제안된 디자인 시스템의 데이터 패스에 할당되어진다. VHDL에 의하여 기술된 하드웨어 명세를 검사 가능한 라이브러리로 매핑을 할 수 있는 검사 가능한 회로가 된다. 결과적으로 충돌그래프에서 레지스터를 최소로 하는 할당 알고리즘에 의하여 H/W로 매핑되는데 BILBO(built-in logic block Observation)레지스터를 재구성하여 TP(test pattern generator)와 MISR(multi input signature response)로서 데이터 경로 구조가 자체검사가 가능하게 되는 것이다. For the testability, this paper proposed the algorithm at autonomous synthesis which includes the data path structure as the self testing as possible on high level synthesis method when VHDL, coding is used in the system design area. In the proposed algorithm of this paper, MUXs and registers are assigned to the data path of designed system. And the designed data path could be mapped the H/W specification of described VHDL coding to the testable library. As a results, it was mapped H/W to the assign algorithm that is minimized MUX and the registers in collision graph.

GMPLS 네트워크에서 다중 경로 장애 발생시 Resilience를 만족하는 동적 경로 관리 방법

박종태,이위혁,권정호,Park Jong-Tae,Lee Wee-Hyuk,Kwon Jung-Ho 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.5b

최근 광네트워크 기반 IP 서비스가 증가함에 따라 GMPLS 관리 프레임워크는 더욱 중요해지고 있다. 본 논문에서는 이러한 GMPLS 네트워크의 장애 요인들 중 다중 경로 장애 시 사용자의 트래픽 엔지니어링 복구 요구조건을 만족하고 최적의 서비스에 대한 대체 경로를 찾을 수 있는 동적 GMPLS 경로 관리 알고리즘을 제안한다. 구체적으로 GMPLS 네트워크에서 복구 조건을 만족하는 대체 경로의 가용성 조건들을 도출하고 있다. 또한 고속 대체 경로 설정 알고리즘을 제안하여 사용자의 복구 요구조건을 만족하고 서비스의 중지를 최소한으로 막을 수 있게 한다. As an increase in recent optical network-based IP services, GMPLS management framework becomes more important than ever before. In this paper, we propose the dynamic GMPLS path management algorithm, which can satisfy the users with their traffic engineering recovery requirements and find out the best backup service path under multiple link failures. To be more specific, we are deriving the soluble conditions of a backup path which is satisfied in a GMPLS network. In addition, through proposing the fast backup path selection algorithm, we can sufficiently satisfy a user's recovery requirement and minimally protect the suspension of the service against a link failure.

제언 - 지금 산업보건분야의 경쟁상대는 누구인가?

박종태,Park, Jong-Tae 대한산업보건협회 2009 산업보건 Vol.256 No.-