http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최창주,조금배 조선대학교 에너지.자원신기술연구소 2001 에너지·자원신기술연구소 논문지 Vol.23 No.1
The automation system of distribution needed to seperate with quick response for the reliability coefficient in electric power transmission which interruption of service and breakdown This paper obtained the plan of the operation on power distribution system by automated distribution systems, and then transmission line and component of distribution automation system are analyzed for the remote supervisor control function. system configuration and its technological fesibility to distribution automation system. And it will be based for improvement of grid connecting distribution automation system.
인버티드 스태거형 비정질 실리콘박막 트랜지스터의 전압-전류 특성
崔昌柱,李愚宣 조선대학교 생산기술연구소 1996 生産技術硏究 Vol.18 No.1
Electrical characteristics of inverted staggered type amorphous silicon thin film transistor was studied and experimentally verified. It was determined that the saturated drain current increased at a fixed gate voltage. The results show that the log-log plot of drain current increased by voltage increase. According to the increase of gate voltage. activation energy of electron and the increasing width of Id at high voltage were decreased. Id saturation current saturated at high Vd over 4.5V. Vg-Id hysteresis characteristic curve showed between -15V and 15V of Vg. Hysteresis current decreased at low voltage of -15V and increased at high voltage of 15V.
최창주,송환기 조선대학교 에너지.자원신기술연구소 2000 에너지·자원신기술연구소 논문지 Vol.22 No.1
The instantaneous speed measurement method using a three phase sinusoidal encoder is described in this paper. The proposed method can easily detect the AC motor speed by using that the encoder is directly proportional to the AC motor speed. The performance of proposed method is confirmed by experiment results using speed detection. For the high accuracy of the optimum control system. AC motor speed detection is designed and proposed.
평판 표시기용 비정질 실리콘 박막 트랜지스터의 전기적인 특성과 수학적인 모델
최창주,이우선,김병인 한국조명전기설비학회 1994 조명.전기설비 Vol.8 No.5
평판 디스플레이용 비정질 실리콘 박막 트랜지스터의 전기적인 특성과 수학적인 모델에 대하여 연구되었고 이론적인 모델은 실험을 통하여 그 타당성을 입증하였다. 게이트전압이 고정된 상태에서 드레인 전압 증가에 따른 드레인 포화전류는 증가되었고 디바이스의 포화는 드레인 전압이 증가될수록 더 증가되었으며 문턱전압은 감소되었다. 세 개의 변수로 구성된 디바이스의 전달특성과 출력특성에 대한 실험 결과값에 대한 모델식이 제시되었는데 이 모델은 디비이스의 기하학적인 구조를 간단화 하기위한 모델식이다.
驅動 및 回生制動이 可能한 2相 2重 초퍼方式에 관한 硏究
崔昌柱,鄭壽福,曺錦培 조선대학교 동력자원연구소 1990 動力資源硏究所誌 Vol.12 No.1
This paper states the scheme which makes powering and Regenerative Brakon operation occur without increasing the number of devices, implimenting Reverse Conductive Thyristor in the chopper circuit. The Powering and Regenerative Brakon operation in the Sepafately excited DC Motof can be controlled continously the only by gate sognal of Chopper Sysem. The above, the Chopper System with a function of powerinf and Regenerative Braking operation proves a study on the theory and experiment.
Thyristor를 利用한 單相誘導電動機의 起動Switch 改善에 關한 硏究
崔昌柱,金昌錫 조선대학교 생산기술연구소 1987 生産技術硏究 Vol.9 No.2
The starting switch of single phase induction motor is mechanically operated by the centrifugal force, On account of the complex structure and high frequency in use, it is frequently broken down by defacement. In this viewpoint, in order to turn on and off the centrifugal starting switch fixed to the auxiliary winding in series without a point of contact. I make an attempt to improve conventional structure of starting switch by means of thyristor circuit through experiment.
Brookite TiO2 코팅용 졸의 제조 및 광촉매 효과
최창주,김선재,이남희,이강 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.7
Transparent TiO2 sols were prepared by hydrothermal synthesis to heat Ti precursor solutions, from Ti hydroxides obtained with neutralizing aqueous TiOCl2 solutions having various concentrations of NaCl by aqueous NaOH solution, in the autoclave at 120oC. The photocatalytic abilities of glass beads coated with the sol for gaseous benzene were evaluated. As a result, it was found that due to the increase of brookite phase in TiO2 by controlling the concentration of Na ion the optical absorption of TiO2 increases toward long wavelength but that in the area of short wavelength becomes relatively low and consequently the photocatalytic performance of TiO2 thin film for benzene gas rather decreases, compared to that of composite film of anatase and brookite phases. These results suggest that in order for coated TiO2 thin film to have high dissociation performance for benzene gas it is effective to form anatase and brookite phases compositely in TiO2.
電力 MOSFET의 出力電壓과 Threshold 電壓의 온도 의존성
崔昌柱 조선대학교 생산기술연구소 1991 生産技術硏究 Vol.13 No.1
Double-diffused metal oxide power semiconductor field effect transistors are used extensively in recent years in various circuit applications. One of the most important parameters of any semiconductor device is its operating temperature. The operating temperature is important in determining the reliability and operating life of the device, and it also has a strong influence on many of the electrical pramaters of the device. The temperature variation of the drain current at a fixed bias shows both positive and negative resistance characteristics depending on the gate threshold voltage and gate to source bias voltage. In this study, the temperature dependent of threshold voltage and output voltage characteristics of power VDMOSFET are presented.
최창주,서강성,박수강,조금배,백형래,임병옥 조선대학교 에너지.자원신기술연구소 2002 에너지·자원신기술연구소 논문지 Vol.24 No.2
Single phase induction motor(SPIM) is one of the most widely used type of low power AC motors in the world, especially for domestic or commercial applications where a three phase power supply is not available. Fractional horse power single phase induction motors have no starting torque their own. So there are several ways of starting single phase induction motors. The most common type is the starting capacitor installed in series with the auxiliary winding to increase the starting torque. Also, the auxiliary winding is disconnected once the speed of the motor reaches 70 to 80% of the rated speed. In the conventional systems, this function is conducted by a centrifugal switch. But the mechanical centrifugal switch has many problems such as switch malfunction. This paper presents the new methods of universal starting switch by digital controller to overcome these shortcomings of centrifugal switch.
崔昌柱 조선대학교 동력자원연구소 1984 動力資源硏究所誌 Vol.6 No.1
The starting switch of single-phase induction motor is mechanically operated by the centrifugal force. On account of the complex structure and high frequency in use, it is frequently broken down by defacement. In this viewpoint, in order to turn on and off the centrifugal starting switch fixed to the auxiliary winding in series without a point of contact. it is possible to improve conventional structure of starting switch by means of thyristor circuit through experiments.