http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이제근,황영기 慶南大學校 附設 工業技術硏究所 1984 硏究論文集 Vol.2 No.-
Plane parallel cylindrical geometry를 갖는 유동충전극 반응기에서 황산동 수용액으로 부터 구리를 전착하였다. 전해액 농도(100∼5000ppm), 입자크기(0.3∼0.7mm) 및 층팽창율(20∼40%) 변화에 따라 전하 전달 계수를 조사하였다. 그 결과 전하 전달 계수는 층팽창의 0.34승에 역비례하고, 입자크기의 0.81승에 비레하였으며, 전해액 농도에는 무관함을 알 수 있었다. A fluidized bed electrode reactor with plane parallel cylindrical geometry was used to deposit copper from acidified aqueous copper sulfate solution. The effect of variables, electrolyte concentration (100∼5.000ppm), copper particle size (0.3∼0.7mm in diameter) and bed expansion (20∼40%), on the charge transfer coefficient was investigated. Results showed that the charge transfer coefficient was inversely proportional to the 0.34 power of the bed expansion and proportional to the 0.81 power of the particle size, but was independent of electrolyte concentraion.
이재희,김정국,양희철,김준형,이제근 한국화학공학회 2003 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.41 No.1
KA, NaA, CaA 및 NaX 제올라이트가 충전된 실험실 규모의 흡착층을 이용하여 SO_2 유입농도, 충전층 높이 및 공간속도를 변화시키면서 SO_2 흡착실험을 수행하였다. 평형흡착량과 파과시간 모두 제올라이트 세공크기에 따라 KA, NaA, CaA, NaX 순으로 증가하였다. NaX상에서 SO_2를 흡착시킬 경우 SO_2 유입농도 504ppm 이하에서 파과시간은 증가하나 역시 물질전달범위도 증가하여 물질전달 속도는 감소하였다. Wheeler 식으로부터 제올라이트상의 파과시간에 대한 평형흡착량, 공간속도 및 1/C_0의 관계를 확인한 결과, 504ppm 이상보다 504ppm 이하의 저농도에서 파과시간이 상대적으로 증가하였다. The experimental of SO_2 adsorption, with varying SO_2 concentration, packed-bed depth, and space velocity, was carried out using a lab-scale fixed bed with zeolites, such as KA, NaA, CaA and NaX. Both of an equilibrium adsorption capacity and a breakthrough time increased with zeolite pore size, in order of KA, NaA, CaA and NaX. Breakthrough time of NaX increased under SO_2 concentration of 504 ppm, but mass transfer rate decreased due to expansion of mass transfer zone. Breakthrough time is relatively increased in the low gas concentration(<504 ppm) more than high concentration(>504 ppm), which is proved by the effects of equilibrium adsorption capacity, space velocity and l/C_0 for the zeolite from the relationship of Wheeler equation.
동국제강에서 배출되는 대기오염물질이 인접지역 환경에 미치는 영향
朴淸吉,李起浩,李濟根,許喆九 釜山水産大學校 1989 釜山水産大學 硏究報告 Vol.29 No.1-2
The environmental effect of air pollutants emitted from Dong-Kuk Steel Company on neighboring area was assessed by measuring air pollutants and using the computer simulation model. Some results from this study were summarized as follows; The concentration of sulfur dioxide in winter was mostly exceeded the Air Quality Criteria(0.05ppm) but its annual average concentration was far below the Criteria. However, the annual average concentration of total suspended particulates(TSP) in the atmosphere(170㎍/㎥) was largely exceeded the Criteria(150㎍/㎥) and the fluctuation of its concentration between months was very great. The results calculated from the computer simulation by TEM-8 Model showed that the air quality in this region was fairly good in view of the concentration of sulfur dioxide with the range from 0.01 to 0.03ppm. However, it was assessed by simulation that when the wind blew from the ESE direction the maximum concentration of sulfur dioxide might be reached up to 0.078ppm and then could be largely exceeded the Criteria. Fortunately, according to the data from in situ measuruement, those undesirable wether condition was little occurred during the term of research.
용융슬래그로부터 합성된 제올라이트 이용한 해수 중의 N, P 제거
임준혁,정진영,이성우,홍성호,김경희,이제근 한국공업화학회 2003 응용화학 Vol.7 No.1
This study examined, as the one way of using zeolite, the about the removal of ammonia nitrogen and phosphorus that cause the eutrophication occurred the adjoining seas.4A type zeolite was used as an adsorbent to remve NH_4-N, PO_4^3-P ion in the artificial seawater. Zeolite is more required than in the fiesh water, under the same conditions, in order to remove NH_4-N in the sea water. The lower the thickness of NH_4-N is in the early stage, the more Freundlich type equation the value of 1./n increases. In case of PO_4^3-P indicated that the removal efficiency was relatively independent of PO_4^3-P concentration. Freundlich parameter 1/n has the value nuder 2. So it shows that absorption is made with relatively ease.
Lee, Sang-Hee,Lee, Kyung-Jin,Woo, Jea-Seok,Lee, Seung-Hwan,Cheong, Hee-Tae,Yang, Boo-Keun,Park, Choon-Keun 韓國受精卵移植學會 2014 한국동물생명공학회지 Vol.29 No.2
The objective of this study was to evaluate the characteristics of Korean Native Cattle sperm frozen-thawed with L-cysteine and/or catalase. The semen from bulls was collected by the artificial vagina method, and Triladyl containing 20% egg-yolk and/or L-cysteine (L), catalase (C) and L-cysteine+ catalase was added to the diluted semen for cryopreservation. The results showed that sperm viability was significantly higher in the L-cysteine+ catalase (69.49 ± 3.16%) group than in the control (60.5 ± 3.94%) group (p<0.05). Acrosome damage was significantly lower in the L-cysteine (17.12 ± 1.08%) group than in the control (21.46 ± 1.14%), catalase (20.54 ± 0.76%), and L-cysteine+ catalase (19.29 ± 0.65%) groups (p<0.05). In addition, the level of intact mitochondria in the spermatozoa was significantly higher in the L-cysteine (58.65 ± 1.39%) group than in the control (50.63 ± 2.37%) group (p<0.05). The hydrogen peroxide level in the frozen-thawed sperm was significantly lower in the L-cysteine (3.74 ± 1.66%), catalase (4.65 ± 1.87%), and L-cysteine+ catalase (8.11 ± 2.15%) groups than in the control (13.22 ± 1.6%) group (p<0.05). The glutathione level was significantly higher in the L-cysteine (1.33 ± 0.03%) group than in the control (1.08 ± 0.06 %), catalase (1.05 ± 0.02%) and L-cysteine+ catalase (1.11 ± 0.03%) groups (p<0.05). In conclusion, L-cysteine and catalase could protect the membrane of Korean Native Cattle sperm from damage during sperm cryopreservation. Especially, L-cysteine was more effective for keeping acrosomes and mitochondria intactness during sperm cryopreservation.
우제근 ( Jea-keun Woo ),최일수 ( Il-su Choi ),이춘구 ( Chun-gu Lee ),이명희 ( Myung-hee Lee ),김영화 ( Young-hwa Kim ),유승화 ( Seoung-hwa Yu ),최용 ( Yong Choi ),최덕규 ( Duck-kyu Choi ),김영근 ( Young-keun Kim ),이충근 ( Choung 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
농가인구의 고령화 및 감소, 1인당 경지면적 증가 등으로 인해 노동력 부족 현상이 조명되고 있다. 따라서 시간당 더 많은 면적을 작업할 수 있도록 농기계의 고성능화가 요구되고 있다. 현재 4~6조 콤바인이 시판 중에 있으며, 앞서 설명된 영농 규모 변화에 따라 대형 콤바인의 수요가 늘어나는 추세이다. 이에 본 연구는 6조식 자탈형 콤바인 고성능화를 위하여 작업속도에 따른 수확성능과 작업능률을 측정 및 분석하였다. 시작기의 벼 수확 포장성능 시험은 경남 창녕군 남지읍 소재 농가포장에서 수행하였으며, 시작기 선별부의 구동조건을 선별체 회전수 422 rpm, 풍구 회전수 800 rpm, 채프각 45°으로 고정하고, 작업속도 3수준(1.5 m/s, 1.7m/s, 1.9 m/s)을 시험요인으로 설정하였다. 수확성능 분석을 위해 작업구간을 10 m로 설정하고 임의로 1 m 구간을 선정하여 시작기 뒤로 배출된 볏집, 검불 등을 조사하여 곡립구중의 손실립비를 측정하였다. 작업능률의 경우 시험 당시 측정된 평균 작업속도, 유효 작업폭, 회행시간을 측정하여 도출하였다. 공시작물의 생육조사 결과 경장 86.83±4.95 cm, 이삭길이 20.40±5.85 cm, 곡물 함수율 15.37±0.43%, 천립중 28.65±1.05 g으로 나타났다. 시험 결과, 최대 작업속도인 1.9 m/s일때, 곡립구중의 손실립비가 0.41%로 농업기계 검정기준(1% 이하)을 충족하는 것으로 나타났다. 또한, 전년도에 동일한 구동 조건으로 수행한 선별부 시뮬레이터 시험 결과인 1.08%보다 낮게 나타났다. 이는 선별부 시뮬레이터 구동 시, 시작기에 부착된 선별부 대비 고정력이 약하여 더 큰 진동이 발생, 손실립비가 시작기에 비해 높게 발생한 것으로 판단된다. 작업능률은 평균 작업속도 1.9 m/s 기준, 유효 작업폭 1.8 m, 회행시간 9.33s로 측정되어 0.11시간/10a로 나타났다.
가변 제어형 식용 풋옥수수 수확기 기계수확 시스템 설계 및 제작
우제근 ( Jea-keun Woo ),최일수 ( Il-su Choi ),윤상희 ( Sang-hee Yun ),강연구 ( Youn-koo Kang ),이상희 ( Sang-hee Lee ),박석호 ( Seok-ho Park ),김영근 ( Young-keun Kim ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
세계적으로 옥수수는 쌀 다음으로 생산량이 많으며 벼, 밀과 함께 세계 3대 작물 중 하나이다. 식용 또는 사료용, 에탄올 제조 등 다양한 용도로 쓰이는 옥수수는 사료용의 경우 전용 수확기가 개발 및 실용화가 되었다. 식용 풋옥수수 수확의 경우 인력에 의존하고 있으며, 수확 작업에 소요되는 시간은 16.2시간/10a으로 총 재배 작업시간 58.6시간/10a 중 가장 많은 비중인 27.6%를 차지하고 있다. 또한 농촌인구의 지속적 감소 및 고령화, 코로나19 등으로 인해 노동력 부족현상이 심화되고 있는 상황이기에, 수확기 개발 요구가 높은 실정이다. 따라서 본 연구에서는 찰옥수수와 단옥수수를 포함하는 식용 풋옥수수의 예취, 이송 및 탈과, 수집을 동시에 작업하는 트랙터 부착형 풋옥수수 수확기의 일관 수확 시스템을 설계 및 제작하였다. 수확기는 트랙터 측면 부착방식으로 PTO를 통해 유압펌프 및 발전기를 구동, 주요부가 작동하도록 설계하였으며, 기체의 크기는 3,900×2,882×2283(L×W×H)이다. 풋옥수수 줄기의 하단을 원형톱날을 이용하여 베는 예취부와 벨트를 통해 줄기를 이송하는 이송부, 줄기로부터 풋옥수수를 분리하는 회전식 롤러를 적용한 탈과부는 유압모터를 통해 작동되며 유압 조절밸브를 통해 이송속도 및 롤러의 회전속도 조절이 가능하도록 하였다. 국내에서 주로 재배되는 찰옥수수의 경우, 열매가 열리는 높이가 지상으로부터 약 1 m지만, 단옥수수는 약 30 cm에서 열리는 특성을 고려하여 줄기 이송부와 탈과부를 유압실린더를 통해 작동위치의 상하제어가 가능하도록 하였다. 줄기로부터 분리된 풋옥수수를 수집부로 이송하는 컨베이어 벨트와 수집부 톤백에 담긴 풋옥수수의 무게 및 수량을 계측하는 무게 감응형 장치는 발전기를 통해 작동된다. 추후 국내 풋옥수수 주산지를 대상으로 지역적응성 시험을 통하여 최적 작업조건을 구명할 예정이다.
가변 제어형 식용 풋옥수수 수확기 개발을 위한 적정 작업속도 분석
우제근 ( Jea-keun Woo ),최일수 ( Il-su Choi ),윤상희 ( Sang-hee Yun ),강연구 ( Youn-koo Kang ),이상희 ( Sang-hee Lee ),박석호 ( Seok-ho Park ),김영근 ( Young-keun Kim ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
국민 식습관 변화로 인해 쌀 소비 감소에 따른 논 밭작물 재배 확대가 늘어나는 추세로 밭작물 중 식용 풋옥수수가 경쟁력 있는 품목으로 주목받고 있다. 하지만 풋옥수수 주요 재배작업 중 파종ㆍ정식 작업은 보급중인 농기계로 작업이 가능하지만 재배에 필요한 시간(58.6시간/10a) 중 가장 큰 비중(27.6%)을 차지하는 수확 작업은 인력으로 이루어지고 있다. 따라서 본 연구에서는 설계ㆍ제작한 가변 제어형 식용 풋옥수수 수확기의 적정 작업속도를 구명하는데 목적이 있다. 적정 작업속도 도출을 위한 성능시험은 경남 밀양시 국립식량과 학원 남부작물부 소재 포장에서 일미찰 품종을 대상으로 실시하였으며, 107 kW급 트랙터를 이용하여 PTO 540 rpm, 엔진 1,500 rpm으로 고정하고, 초저속 2단, 초저속 3단, 초저속 4단 3수준을 시험 요인으로 설정하였다. 수확기의 구동조건은 줄기 이송속도 0.25 m/s, 탈과용 롤러의 회전속도 180 rpm으로 고정하였다. 시험은 10 m 구간 작업 후 탈과율, 수집률, 손상률을 조사하였으며, 요인당 3반복 실시하였다. 작업속도에 따른 수확성능 유의성을 검정하기 위해 5% 유의수준에서 일원배치 분산분석(One-way Anova)을 실시하였다. 작업속도 측정 결과 초저속 2단은 0.10 m/s, 초저속 3단은 0.13 m/s, 초저속 4단은 0.17 m/s로 나타났다. 탈과율은 작업속도 0.10, 0.13, 0.17 m/s에서 98.20, 98.22, 97.37%로 나타났으며, 통계분석결과 작업속도에 따른 유의차가 없는 것으로 나타났다. 수집률의 경우, 0.10 m/s에서 89.03%, 0.13 m/s에서 92.44%, 0.17 m/s에서 88.60%로 나타나 0.13 m/s의 속도 요인이 다른 요인 대비 수집률이 3% 높게 나타났지만, 검정결과 유의성이 없는 것으로 나타났다. 손상률은 0.10 m/s에서 1.80%, 0.13 m/s에서 1.78%, 0.17 m/s에서 2.63%로 나타났으며 탈과율, 수집률과 마찬가지로 작업속도의 영향은 없는 것으로 나타났다. 시작기의 수확성능을 고려하였을때, 0.13 m/s가 적정 작업속도라고 판단된다.