The Bioenergy Conversion Characteristics of Feedlot Manure Discharging from Beef Cattle Barn

Seung-Yong Oh,Chang-Hyun Kim,Young-Man Yoon 한국토양비료학회 2015 한국토양비료학회지 Vol.48 No.6

This study was carried out to assess bioenergy conversion efficiency by biogas and solid fuel production in the cattle feedlot manure discharged from beef cattle barn. Feedlot manure was sampled from the cattle farmhouse located in Yong-in, Gyeonggi during the mid-fattening stage, periodically. The chemical characteristics, BMP (Biochemical methane potential) and HV (Heating values) of feedlot cattle manures were analyzed. Total solid contents of cattle feedlot manure were in the range of 29.98~44.28%, and volatile solid contents were in the range of 23.53~24.47%. In the anaerobic digestion of cattle feedlot manure, the methane production potential has increased from 0.141 to 0.187 Nm<SUP>3</SUP> kg<SUP>-1</SUP> -VSadded. The methane production of fresh cattle feedlot manure showed the range 0.141~0.187 Nm<SUP>3</SUP> kg<SUP>-1</SUP> -Manure (average 0.047 Nm<SUP>3</SUP> kg<SUP>-1</SUP> -Manure), the LHVs (lower heating values) of the produced methane were in the range of 316~560 kcal kg<SUP>-1</SUP> -Manure (average 400 kcal kg <SUP>-1</SUP> - Manure). In the direct combustion of fresh cattle feedlot manure, the LHVs were measured in the range of 747~1,271 kcal kg<SUP>-1</SUP> -Manure (average 916 kcal kg<SUP>-1</SUP> -Manure), and LHVs of solid fuel which have the water content of 20% were in the range of 2,694~2,876 kcal kg<SUP>-1</SUP>-Manure (average 2,791 kcal kg<SUP>-1</SUP> -Manure). Then, the drying energy of average 443 kcal kg<SUP>-1</SUP> -Manure was consumed in the production of solid fuel which has a water content of 20%. Therefore, the direct combustion of cattle feedlot manure showed about 2.3 times higher LHV than the LHV of methane produced by anaerobic digestion. And LHV of solid fuel was about 6.0 times higher than the LHV of methane produced by anaerobic digestion. Then, the production of solid fuel presented more bioenergy conversion efficiency than the biogas production in the bioenergy use of cattle feedlot manure.

The Bioenergy Conversion Characteristics of Feedlot Manure Discharging from Beef Cattle Barn

Oh, Seung-Yong,Kim, Chang-Hyun,Yoon, Young-Man 한국토양비료학회 2015 한국토양비료학회지 Vol.48 No.6

This study was carried out to assess bioenergy conversion efficiency by biogas and solid fuel production in the cattle feedlot manure discharged from beef cattle barn. Feedlot manure was sampled from the cattle farmhouse located in Yong-in, Gyeonggi during the mid-fattening stage, periodically. The chemical characteristics, BMP (Biochemical methane potential) and HV (Heating values) of feedlot cattle manures were analyzed. Total solid contents of cattle feedlot manure were in the range of 29.98~44.28%, and volatile solid contents were in the range of 23.53~24.47%. In the anaerobic digestion of cattle feedlot manure, the methane production potential has increased from 0.141 to $0.187Nm^3kg^{-1}-VS_{added}$. The methane production of fresh cattle feedlot manure showed the range $0.141{\sim}0.187Nm^3kg^{-1}$-Manure (average $0.047Nm^3kg^{-1}$-Manure), the LHVs (lower heating values) of the produced methane were in the range of $316{\sim}560kcalkg^{-1}$-Manure (average $400kcalkg^{-1}$-Manure). In the direct combustion of fresh cattle feedlot manure, the LHVs were measured in the range of $747{\sim}1,271kcalkg^{-1}$-Manure (average $916kcalkg^{-1}$-Manure), and LHVs of solid fuel which have the water content of 20% were in the range of $2,694{\sim}2,876kcalkg^{-1}$-Manure (average $2,791kcalkg^{-1}$-Manure). Then, the drying energy of average $443kcalkg^{-1}$-Manure was consumed in the production of solid fuel which has a water content of 20%. Therefore, the direct combustion of cattle feedlot manure showed about 2.3 times higher LHV than the LHV of methane produced by anaerobic digestion. And LHV of solid fuel was about 6.0 times higher than the LHV of methane produced by anaerobic digestion. Then, the production of solid fuel presented more bioenergy conversion efficiency than the biogas production in the bioenergy use of cattle feedlot manure.

위암환자의 복강내에 투여한 Mitomycin C-Carbon Particle의 Mitomycin 용출에 관한 연구

노승무,조영훈,정경수,오정연,김진향,양준묵,강대영,송규상,조준식,최선웅,이진호,민병무,김용백,김창식,박근성,인현빈,정현용,김학용 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Locoregional recurrence is the most common type of recurrence in surgical operation of gastric adenocarcinoma, and peritoneal dissemination is one of the most difficult problems in advanced gastric adenocarcinoma treatment. Because the peritoneal cavity is the most common site of the first recurrence after gastric cancer resection, intraperitoneal chemotherpy seems a logical choice for cancer chemotherapy. The Mitomycin C(MMC) adsorbed by the activated charcoal particles(CH) is relatively released when the drug concentration surrounding the carbon particles becomes low in the peritoneum of the peritoneal cavity. For the intraperitoneal chemotherapy on the advanced gastric adenocarcnoma, mitomycin C adsorbed on activated carbon particles was administered in the peritoneal cavity just before abdominal wall closure. The closed drainage tubes were inserted in the peritoneal cavity and clamped for tuo hours after completion of operation. MMC concentrations were serially measured in peritoneal fluid, plasma and urine at 2hour, 48 hour, 72 hour and 168 hour following its administration in order to study the efficacy of the MMC-CH as a drug delivery system. There were minimal toxicities in born marrow, liver, and gastrointestinal system after intraperitoneal MMC-CH administration. The data of this study suggested that MMC-CH may have a somewhat more beneficial effect than surgery alone when administered in optimal dose and schedules, but the MMC concentration of the peritoneal fluid was not sufficient to eradicate remnant cancer cells, and effective duration of maintenance was only below 24 hours in the peritoneal fluid and plasma.

우심방을 침범한 거대 비호지킨씨 림프종 1예

강상범,진승원,이은경,박용현,최용호,김용주,박준철,김재형,홍순조,최규보,권종범,원용순,박건,이은희 대한순환기학회 2000 Korean Circulation Journal Vol.30 No.4

라즈베리파이와 아두이노를 활용한 캠핑 멀티 박스

김종현,오제용,함승수,이재건,이순흠 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2

There is a rising hobby in the COVID-19 pandemic era. At this point, camping accidents are also occurring a lot as more people are camping in cars and outdoors. Most of the casualties among them are carbon monoxide poisoning accidents. Therefore, to prevent carbon monoxide poisoning, we measured with an Arduino board using a "DHT22" sensor and an "MQ7" sensor to know temperature, humidity, and carbon monoxide levels, and then printed it out on LCD after storing it in Raspberry Pi database. Therefore, it is implemented through 3D printing on the appearance modeled directly to the actual user.

잠김 금속판을 이용한 대퇴골 전자하 골절의 치료 : 압박 고 나사와 비교

손현철, 김용민, 김동수, 최의성, 박경진, 조병기, 박지강, 배승환 충북대학교 의과대학 충북대학교 의학연구소 2011 忠北醫大學術誌 Vol.21 No.2

-본문참고-

면역성 혈소판감소성 자반증 및 호중구감소증을 동반한 궤양성 대장염 2예

남승우,양석균,김진천,지현숙,김우건,정훈용,박주상,홍원선,민영일 大韓消化器病學會 1999 大韓消化器病學會誌 Vol.33 No.1

고등어 반건품(半乾品)의 Shelf-Life에 미치는 기체치환포장의 효과

양승택,이현숙 경성대학교 2000 論文集 Vol.21 No.1

An experiment was conducted for extension of shelf-life of semi-dried mackerel using modified atmosphere packaging. Keeping qualities of the products were investigated by measuring moisture content, pH, volatile basic nitrogen(VBN), viable cell count, thiobarbituric acid(TBA) value, peroxide value(POV), color value and sensory evaluation. Good qualities of the products packaged with air, CO₂, N₂ and vacuum, respectively, were maintained at least for 3 days, 5 days, respectively during storage at 5℃, while those of all products stored at 20℃ were only maintained for 12 hr.

신발산업의 공급망 비즈니스 프로세스 분석

현승용,최형림,조민제 東亞大學校 經營問題硏究所 2002 經營論叢 Vol.23 No.-

국내 신발산업(Foodwear Industry)은 주로 외국의 대형 바이어에 의존적인 형태로 생산하는 주문자 상표 부착 생산방식이 대부분을 차지하며, 신발 제조에서 인건비가 차지하는 비중이 절대적이어서 대형 바이어들이 중국, 베트남, 인도네시아 등의 저임금 국가로 신발 생산기지를 옮겨가고 있다. 이로 인해 국내 신발산업은 많은 어려움을 겪고 있는 것이 사실이다. 또한 국내의 신발제조기업들도 상당수 해외에 생산공장을 운영하고 있으며, 국내 생산공장은 그 규모가 굉장히 축소되어 있거나 혹은 연구개발 및 부품 조달기지로서의 역할을 수행하고 있다. 이러한 신발산업의 환경에 변화에 대해 산업 차원에서 대응할 필요성이 있다. 앞으로 국내 신발산업이 성장하기 위해서는 전체 공급망의 협업체제를 갖추는 것이 필요하다. 이를 위해서는 신발산업의 공급망 네트워크 구조를 분석하여 비효율적인 부분을 개선해야 하며, 기업간의 비즈니스 프로세스를 새롭게 정립하여 혁신해야 한다. 이에 본 연구에서는 신발산업의 공급망 네트워크 구조를 분석하여 개선 모델을 제시하였으며, 공급망에서 대부분을 차지하는 신발 완제품 제조기업과 부품 제조기업간의 비즈니스 프로세스를 분석하여 개선된 비즈니스 프로세스를 제시하였다.

시민참여와 정부신뢰

정수현,강한솔,황은진,이정주,노승용 서울여자대학교 사회과학연구소 2012 사회과학논총 Vol.19 No.-

이 연구는 시민참여와 정부신뢰와의 관계를 분석하는데 그 목적이 있다. 이를 위하여, 이 연구에서는 시민참여를 전통적인 오프라인 시민참여와 디지털 방식인 온라인 시민참여로 그 유형을 분류하고, 오프라인 시민참여와 온라인 시민참여의 경험이 정부신뢰와 어떤 관계가 있는지를 분석하였다. 2차 자료를 활용하여 빈도분석, 교차분석, t-test, 분산분석, 회귀분석 등을 실시한 결과 먼저, 우리나라 시민참여 경험자는 약 22% 정도이며, 오프라인 시민참여 경험자는 약 12%, 온라인 시민참여 경험자는 약 15%, 그리고 온라인과 오프라인 시민참여를 모두 경험한 시민은 약 5% 정도인 것으로 나타났다. 또한, 시민참여와 정부신뢰와는 관계를 분석한 결과 통계적으로 유의미한 관계가 없는 것으로 나타났다. 오히려, t-test 및 분산분석 결과 오프라인 및 온라인 시민참여 경험자에 비하여 무경험자의 정부신뢰 수준이 상대적으로 약간 더 높은 것으로 나타났다. 시민참여의 경험 유무 만으로 정부신뢰를 설명하는데는 한계가 있음을 보여 주는 결과일 뿐만 아니라 시민참여를 제도적으로 보장하는 것에서 나아가서 시민참여가 실질적 효과를 높일 수 있도록 시민참여과정에서 정부와 시민의 보다 적극적인 노력이 필요함을 보여주는 결과라 하겠다. Trust in government adds legitimacy to political system, provides social stability, and helps government to work effectively. In addition it increases cooperation between governments and citizens, and improves effectiveness of government affairs. However, citizens' trust in government has been quite low sine 1990s. In Korea, citizens' trust in government dropped after financial crisis in late 1990s. Various literatures indicated that citizen participation is one of the best ways to increase citizens' trust in governments. Especially as information technology increases, it is expected that citizens acquire information about different policy areas, and actively participate in surveys, discussion, and policy evaluation through internet. This research attempts to prove the relationship between citizen participation and trust in government by comparing online and offline citizen participation. The research utilized 2nd dataset from 'the influence of information on citizens' participation in policy-making.' With various statistical techniques such as frequency analysis, cross tabulation, ANOVA, and regression analysis, the characteristics of offline and online policy participants are examined. The results showed that citizens, who participate in policy-making processes more actively both online and offline, trust in government less. Comparing online and offline participation, online participants distrusted government more than offline participants. Such variables as policy competitiveness, democracy in government, quality of government, and transparency in government have direct influences on trust in government. However, citizen participation is not statistically significant. Key Words:Citizen Participation, Traditional Citizen Pariticipation, Digital Citizen Participation, Trust in Government.