가압가열 및 microwave에 의한 중력분 반죽 gliadin의 항원성 변화

곽지희(Ji-Hee Kwak),김꽃봉우리(Koth-Bong-Woo-Ri Kim),이청조(Chung-Jo Lee),김민지(Min-Ji Kim),김동현(Dong-Hyun Kim),선우찬(Chan Sunwoo),정슬아(Seul-A Jung),김현지(Hyun-Jee Kim),최정수(Jung-Su Choi),김성원(Seong-Won Kim),안동현(Dong-Hyun 한국식품과학회 2012 한국식품과학회지 Vol.44 No.1

본 연구에서는 가압가열 및 microwave 처리에 의한 중력분 반죽 추출물 내의 gliadin 단백질의 항원성 변화에 대해 살펴보았다. 중력분 반죽에 가압가열과 microwave를 단독 또는 병행으로 처리하여 ci-ELISA, SDS-PAGE 및 immunoblotting을 실시하였으며, 가압가열 처리에 의해서 anti-gliadin IgG 항체와 gliadin과의 결합력이 다소 감소한 것을 확인하였다. 특히 30 min 이상 처리시 더욱 감소한 것으로 나타났으며, SDS-PAGE와 immunoblotting 결과에서도 gliadin band의 강도가 약해지고 항체와의 반응도 나타나지 않았다. Microwave 처리의 경우, 5 min 이상 처리시 일부 gliadin 단백질의 소실이 관찰되었으나, 항원성에는 큰 변화가 없었다. 또한 가압가열 및 microwave 병행 처리에 의해 항원-항체 결합력이 더욱 감소되었으며, 특히 가압가열 50 min, microwave 10 min 처리시 약 35.0%로 감소되었다. 이상의 결과를 통해 가압가열 처리에 의해 중력분 반죽 추출물 내 gliadin의 항원성이 감소되는 것을 확인하였으며, microwave와 병행 처리하는 경우, 더욱 감소하는 것을 확인하였다. The aim of this study was to determine the optimal physical treatment to reduce the antigenicity of gliadin in wheat dough. Medium wheat dough was treated with an autoclave (5, 10, 30, and 50 min at 121℃, 1 atm), a microwave (1, 5, and 10 min) or both (10, 30, and 50 min/5, 10 min). The proteins in the dough extracts were analyzed by SDS-PAGE and the binding ability of anti-gliadin IgG to gliadin was examined by ci-ELISA and immunoblotting. Results showed that the ability of anti-gliadin IgG to bind to gliadin in wheat dough treated with an autoclave alone or in combination with a microwave was decreased. Especially, it declined to ~77% after autoclaving for 30 min and 35% after both autoclaving for 50 min and microwaving for 5 min. In addition, the intensity of gliadin bands in SDS-PAGE were weakened and anti-gliadin IgG did not recognize gliadin in immunoblotting. However, microwaving alone did not affect the antigenicity of gliadin in wheat dough. These results indicate that autoclaving may affect the reduction of the antigenicity of gliadin in medium wheat dough. Moreover, autoclaving in combination with microwaving is more effective for reducing the antigenicity of wheat dough.

가압가열 및 Microwave 처리에 의한 중력분 Gliadin의 항원성 변화

곽지희(Ji-Hee Kwak),김꽃봉우리(Koth-Bong-Woo-Ri Kim),이청조(Chung-Jo Lee),김민지(Min-Ji Kim),김동현(Dong-Hyun Kim),선우찬(Chan Sunwoo),정슬아(Seul-A Jung),강주연(Ju-Youn Kang),김현지(Hyun-Jee Kim),최정수(Jung-Su Choi),김성원(Seong-Won 한국식품영양과학회 2011 한국식품영양과학회지 Vol.40 No.10

본 연구에서는 가압가열 및 microwave 처리가 gliadin의 항원성에 미치는 영향을 살펴보기 위해 중력분에 가압가열과 microwave를 단독 또는 병행으로 처리하여 Ci-ELISA, SDS-PAGE 및 immunoblotting을 실시하였다. 가압가열 처리의 경우, 처리 시간이 길어질수록 IgG와의 결합력이 감소하였으며, 특히 50분 처리구에서 약 69%로 가장 낮은 결합력을 보였다. 또한 SDS-PAGE와 immunoblotting 결과에서도 무처리구에서 강하게 보였던 gliadin band가 처리에 의해 거의 소실되고 항체와 반응하지 않았다. 가압가열 및 microwave를 병행 처리한 경우도 마찬가지로 gliadin의 결합력이 다소 감소하였으며, 처리구 중에서는 가압가열 50분, microwave 5분 처리구에서 약 73%로 가장 낮은 결합력을 보였다. 반면 microwave를 단독으로 처리하였을 때에는 일부 단백질의 변화는 관찰되었으나 항원성 감소에는 큰 영향을 미치지 않았다. 이상의 결과를 통해 가압가열을 단독 처리에 의해 gliadin의 항원성이 다소 감소되었으며, microwave 병행 처리에 의한 차이는 크게 나타나지 않은 것을 확인하였다. This study was conducted to evaluate the effect of physical treatments on the antigenicity of gliadin in medium wheat flour. The wheat flour was treated with an autoclave (5, 10, 30, 50 min), a microwave (1, 5, 10 min), and both (10, 30, 50 min/ 5, 10 min), and investigated by SDS-PAGE, immunoblotting and Ci-ELISA using anti-gliadin IgG. The results showed that the binding ability of anti-gliadin IgG to gliadin in wheat flour was slightly decreased when autoclaved or when autoclaved and microwaved. Especially, it was reduced to about 69% after autoclaving for 50 min and 73% after autoclaving for 50 min and microwaving for 5 min. In addition, gliadin bands in the 50 min autoclaved group disappeared in both SDS-PAGE and immunoblotting. On the other hand, the antigenicity of gliadin was unaffected by microwaving alone. Consequently, there were no considerable changes in using an autoclave alone or in combination with a microwave. These results suggest that autoclaving may affect the reduction of the antigenicity of gliadin in medium wheat flour.

A comparison of Min’s glasses and conventional occlusion therapy in the treatment of amblyopic children: a prospective study

Byung Moo Min,Seung Young Kim,Kil Hwan Ko,Seong Bok Lee 대한안과학회 2000 Korean Journal of Ophthalmology Vol.14 No.1

Min’s glasses are specially manufactured in order to enhance the satisfaction of the wearer and increase treatment effectiveness. We compared the effectiveness of Min’s glasses with that of conventional occlusion therapy in amblyopic pediatric patients. We prospectively studied 60 amblyopic patients. For four to 30 months, 24 of the patients were treated with conventional patch occlusion (patch group) and 36 of them were treated with Min’s glasses (glasses group). We compared the improvement in visual acuity and the treatment compliance between both groups, according to age (over six and less than six), sex, type of amblyopia, and the duration of treatment. Sixteen patients (66.7%) in the patch group and 32 patients (88.9%) in glasses group showed improvement in visual acuity (p=0.002). The pre-treatment average log MAR acuity was 0.56±0.25 in the patch group, and 0.59 ±0.25 in the glasses group. The average improvement in visual acuity was a 0.17 log MAR score in the patch group, and a 0.31 log MAR score in the glasses group (p=0.004). Compliance was 59.54% in the patch group and 83.44% in the glasses group (p=0.012). The pre-treatment average log MAR acuity was 0.49 ± 0.23 for children over six years of age in the patch group, and 0.58±0.28 for children over six years of age in the glasses group. For children over six years of age in the glasses group the improvement in visual acuity (0.29 log MAR score) was greater than for children over six years of age in the patch group (0.06 log MAR score) (p=0.0003). The pre-treatment average log MAR acuity was 0.55±0.22 for female patients in the patch group, and 0.60±0.25 for female patients in the glasses group. Female patients in the glasses group also showed a greater visual acuity improvement (0.29 log MAR score) than female patients in the patch group (0.14 log MAR score) (p=0.0028). However, there were no differences between the groups in patients less than six years of age and in male patients. In conclusion, Min’s glasses were more effective than conventional treatment with a patch in improving visual acuity and encouraging compliance in pediatric amblyopic patients, especially in children over six years of age and in girls.

Effect of Forging Type on the Deformation Heterogeneities in Multi‑Axial Diagonal Forged AA1100

Min‑Seong Kim,Sang‑Chul Kwon,Sun‑Tae Kim,Seong Lee,Hyo‑Tae Jeong,Shi‑Hoon Choi 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.3

The present study investigated the effects that different types of forging exert on the deformation heterogeneities developedin AA1100 during multi-axial diagonal forging. To measure the deformation heterogeneities of deformed workpieces, thevalues for hardness and Kernel average misorientation were measured at the center section following each forging process. Type-D forging that consists of diagonal forging and return-diagonal forging was relatively advantageous compared withType-P forging that includes plane forging and return-plane forging for minimizing the non-uniformity of deformationdeveloped in workpieces. The effective strain developed in a workpiece during the 2 types of forging was simulated using3-D FEA. FEA revealed that the positions and degrees of occurrence for soft and hard-zones in workpieces vary greatlydepending on the forging type. Type-D forging was relatively advantageous compared with Type-P forging for minimizingthe non-uniformity of effective strain developed in workpieces.

3단계 층화확률화응답모형

김종민,채성산,Kim, Jong-Min,Chae, Seong-S. 한국통계학회 2010 응용통계연구 Vol.23 No.3

직접면접으로 민감한 질문을 할때 발생하는 무응답이나 거짓응답의 문제를 개선하고자 Warner (1965)가 최초로 제안한 확률화응답모형에 관한 연구는 이후 많은 연구자들에 의해 개선, 발전되어 오고 있다. 본 연구에서 표본은 층화임의복원추출법에 의해 추출되었으며, 표본배분은 최적배분법에 의해 배분되었다. 한편, Kim과 Elam (2005)의 2단계 층화확률화응답모형을 확장한 3단계 층화확률화응답모형을 사용하였다. Kim과 Elam (2005)의 2단계 층화확률화응답모형과 상대효율을 비교한 결과 본 논문에서 제시한 3단계 층화확률화모형의 효율성이 상대적으로 높다는 결과가 도출되었다. 그러나 2단계확률화응답모형을 3단계로 확장함으로써 상대적으로 효율성은 증대되지만 반대로 조사과정의 어려움이 예상된다. Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.

한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

목형의 엔드 밀링시 절삭조건에 따른 가공 특성에 관한 연구

김성일,김종택,김민호,신형곤,김태영 한국공작기계학회 2006 한국공작기계학회 추계학술대회논문집 Vol.2006 No.-

The cutting tests of wood patterns are carried out using CNC milling machine. The cutting forces and surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, cutting direction of wood pattern and wood material. In the CNC end-milling, the surface roughness increases as feed speed increases and decreases as spindle speed increases. However, the cutting force and surface roughness are different along the cutting direction and material of wood pattern.

서울의 PPNG 발생 빈도(1991-1992)

김재홍,윤기범,박평원,김영진,전경민,김영태,김중환,곽호,구상완,송민석,유옥,지혜구,김동원,문상은,박영립,정승호,성범진,성순제,엄주용,황정열,이기홍,이주협,전태진 대한화학요법학회 1994 대한화학요법학회지 Vol.12 No.1

The prevalence of PPNG among pretreated gonorrhea cases isolated at the STD clinic of Choong-Ku Public Health Center in Seoul has been studied and reported annually since 1981. In 1991, 123 strains of N.gonorrhoeae were isolated, among which 58(47.1%) were PPNG. In 1992, 98 starains of N.gonorrhoeae were isolated, among which 51(52.0%) were PPNG. In all, 109(49.3%) strains were found to be PPNG among 221 strains isolated between 1991-1992. The prevalence of PPNG in Seoul showed increased tendency till 1989, thereafter, it has been stationary or slightly decreasing.

생체분해성 고분자를 이용한 사시수술용 제형개발 및 효용성에 대한 연구

민병무,김용백,김승영,김창식,박근성,길숙종,조항진,이성복,노승무,송규상,강대영,조준식,양준묵,정경수,최선웅,이진호,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

A new device, muscle clamping system was developed to facilitate exact quatifying technique A strabismus surgery, and reduce the risk of complications. The device is composed of a lower fixing body with three jaws and an upper supporting body. They are used to clip an extraocular muscle and fix it to the sclera with a single bite. Superior rectus recession on 16 rabbit eyes were performed with this new device. Conjunctival injection, muscle adhesion strength, and light microscopic findings were examined at 1, 2, 4 and 8 weeks postoperatively. The Conjunctival injection were minimal, adhesion power ranged from 420 to 600 gram gravity, which is sufficient in withstand the normal pull of human extraocular muscle. In microscopic exam, some Inflammatory cells and fibrosis were found. The new device was technically easy, fast, and accurate, so it may be useful in stabismus surgery.

생체분해성 망막압정을 이용한 망막고정에 대한 실험적 연구

김용백,민병무,김창식,박근성,김승영,길숙종,조항진,이성복,노승무,송규상,강대영,조준식,양준묵,정경수,최선웅,이진호,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Biodegradable retinal fixation devices obtain mechnical fixation of the retina with desirable chorioretinal scarring and with the potential for local, sustained release of antimetabolites and steroids to inhibit proliferative vitreoretinopathy. We manufactured a biodegradable retinal tack with barb that was designed in order to prevent intrusion from implantation of retinal tacks. This study was carried to evaluate the efficacy for retinal fixation and the capability for sustained release of drugs with a newly designed biodegradable retinal tack Biodegradable retinal tacks were made of polymers of glycolic acids and were designed with barbs in a shape to prevent the disinsertion. Biodegradale retinal tacks are divided into 3 parts, a conical portion that is inserted into the sclera, a cylinder portion that remains in the vitreous, and a neck portion between the pin and the cylinder. The tapered conical end was manufactured to allow easy insertion through the retina and choroid into the sclera. A cylinder portion was manufactured with a tapered angle that fixes firmly into the orifice of 19 gauge spinal needle. A neck portion, 0.4 mm in diameter, was designed to prevent disinsertion from following implantation of retinal tack. The applicator was a 19 gauge spinal needle and its orifice was prepared to 15°angle to accept the tapered cylinder portion of the retinal tack. The retinal tacks, secured in the needles, were passed through the formed vitreous and inserted into the retina, choroid, and sclera and were released by pushing the internal needle, usually within 2-3mm of the medullary ray of the posterior rabbit retina A retinal tack was placed in each of 8 pigmented rabbit eyes. Slit-lamp biomicroscopy, indirect ophthalmoscopy and fundus photography were performed periodically from 1 day to 8 weeks after surgery. Eight eyes were enucleated and studied by light microscopy at 8 weeks. Biomicroscopic evaluation of the animals revealed edemas adjacent to the retinal surfaces immediately after insertion of the biodegradable retinal tacks in all the animals. These edemas disappeared after 1 week. The first noticeable change in the size of retinal tacks was shown after 2weeks. The size of the retinal tacks gradually got smaller, decreasing to about one-half at 4 weeks and about one-third at 8 weeks. All retinal tacks remained in inserted places without any movement for an 8 week period. On light microscopy, epiretinal proliferations were seen to extend into the vitreous cavity. Cellular capsules that lined the inner aspect of the scleral defect caused by tack insertion were found. However the adjacent retina had a normal cytologic appearance and architecture in all specimens. We manufactured a biodegradable retinal tack that is designed to prevent intrusion from implantation of retinal tacks. All biodegradable retinal tacks reduce in size with time, but no retinal tacks extruded from the inserted place. The newly designed biodegradable retinal tack can be used for retinal fixation and may be used as a vehicle for the introduction of pharmacologic agents to prevent the cellular events that promote proliferative vitreoretinopathy.