http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한문식(Moon Sik Han),조재웅(Jae Ung Cho) 한국생산제조학회 2011 한국생산제조학회지 Vol.20 No.1
This study analyzes about the variation of pressure and stream velocity according to the movement of tail wing. The pressure at the front part of airplane becomes lower than at the rear part and the stream velocity has decreased by being bumped against the wing of airplane. The pressure at the front part of rudder becomes higher than at its rear part according to the movement of rudder among the tail wings of airplane. The more stream velocity becomes decreased, the more rudder spreads out. As the tail wing of airplane folds, the pressure at its front part becomes higher. And the pressure at its rear part becomes lower than at its front part. The more tail wing of airplane folds, the more stream velocity becomes decreased.
전투기 형상의 외부 장착물과 꼬리 날개 공력 간섭에 대한 수치적 연구
김민재(M.J. Kim),권오준(O.J. Kwon),김지홍(J.H. Kim) 한국전산유체공학회 2007 한국전산유체공학회 학술대회논문집 Vol.2007 No.-
A three-dimensional inviscid flow solver has been developed based on unstructured meshes for the simulation of steady and unsteady flowfields around a generic fighter aircraft and for the investigation of the aerodynamic interference between the external stores and the tail surfaces. The flow solver is based on a vertex-centered finite-volume method and an implicit point Gauss-Seidel relaxation scheme. To validate the flow solver, calculations were made for a steady flow and the computed results were compared with experimental data. An unsteady time-accurate computation of the generic fighter aircraft with external stores at transonic flight conditions showed that the external stores cause undesirable vibration on the horizontal tail surface due to the mutual interference between their wake and the horizontal tail surface. It was shown that downward deflection of the trailing edge flap significantly reduces the undesirable interference effect.
전투기 형상의 외부장착물이 꼬리날개에 미치는 영향에 대한 수치적 연구
김민재(Min-Jae Kim),권오준(Oh-Joon Kwon),김지홍(Ji-Hong Kim) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.3
본 연구에서는 삼차원 비정렬 비점성 유동 해석 코드를 이용하여 전투기 형상의 외부 장착물이 꼬리 날개에 미치는 공력 간섭효과에 대한 연구를 수행하였다. 수치적 기법으로는 격자점 중심(vertex-centered)에 기초한 유한체적법과 시간 적분을 위한 내재적인 point Gauss-Seidel 반복 계산법을 사용하였다. 해석 코드의 검증을 위해 전투기 형상에 대한 정상 유동 계산을 수행하였으며 결과를 실험 데이터와 비교하였다. 외부 장착물의 후류(wake)를 정확히 포착하기 위해 예상되는 후류 영역에 대해 국부적인 격자 조밀화를 수행하였으며 천음속 영역에서의 비정상 유동 해석을 통해 외부 장착물에서 발생하는 후류가 수평꼬리날개에 미치는 간섭효과를 확인하였다. 공력 간섭효과를 감소시키기 위한 대안으로는 뒷전 플랩 꺽임각(trailing edge flap deflection)을 고려하였으며 이에 대한 정량적인 감소효과를 제시하였다. A three-dimensional inviscid flow solver has been developed based on unstructured meshes for the investigation of the effect of the external stores on the tail surfaces of a generic fighter aircraft. The numerical method is based on a vertex-centered finite-volume discretization and an implicit point Gauss-Seidel time integration The calculations were made for a steady flow and the computed results were compared with experimental data to validate the flow solver. An unsteady time-accurate computation of the generic fighter aircraft with external stores at transonic flight conditions showed that the external stores cause unsteady loading on the horizontal tail surface due to the mutual interference between their wake and the horizontal tail surface. It was shown that downward deflection of the trailing edge flap significantly reduces the undesirable interference effect.