CBCT findings of periapical cemento-osseous dysplasia: A case report

Amir Eskandarloo,Faezeh Yousefi1 대한영상치의학회 2013 Imaging Science in Dentistry Vol.43 No.3

Periapical cemento-osseous dysplasia (PCOD) is a subtype of cemento-osseous dysplasia that usually occurs in middleaged black women. This report described a case of a 45-year-old Iranian woman who was diagnosed with PCOD on the basis of cone beam computed tomographic (CBCT) findings. CBCT enabled detailed visualization of the bone changes. This report described the special radiographic characteristics of PCOD, including discontinuity of the lingual cortex on the CBCT sectional and three-dimensional images.

Position of impacted mandibular third molar in different skeletal facial types: First radiographic evaluation in a group of Iranian patients

Abbas Shokri,Majid Mahmoudzadeh,Maryam Baharvand,Hamed Mortazavi,Javad Faradmal,Samira Khajeh,Faezeh Yousefi1,Maruf Noruzi-Gangachin 대한영상치의학회 2014 Imaging Science in Dentistry Vol.44 No.1

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the β angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean βangle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, βangle showed no significant difference in different types of facial growth.. Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the β angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean βangle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, βangle showed no significant difference in different types of facial growth.

Assessment of the accuracy of laser-scanned models and 3-dimensional rendered cone-beam computed tomographic images compared to digital caliper measurements on plaster casts

Yousefi, Faezeh,Shokri, Abbas,Zahedi, Foozie,Farhadian, Maryam Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.-

Purpose: This study investigated the accuracy of laser-scanned models and 3-dimensional(3D) rendered cone-beam computed tomography (CBCT) compared to the gold standard (plaster casts) for linear measurements on dental arches. Materials and Methods: CBCT scans and plaster models from 30 patients were retrieved. Plaster models were scanned by an Emerald laser scanner (Planmeca, Helsinki, Finland). Sixteen different measurements, encompassing the mesiodistal width of teeth and both arches' length and width, were calculated using various landmarks. Linear measurements were made on laser-scanned models using Autodesk Meshmixer software v. 3.0 (Autodesk, Mill Valley, CA, USA), on 3D-rendered CBCT models using OnDemand 3D v. 1.0 (Cybermed, Seoul, Korea) and on plaster casts by a digital caliper. Descriptive statistics, the paired t-test, and intra- and inter-class correlation coefficients were used to analyze the data. Results: There were statistically significant differences between some measurements on plaster casts and laser-scanned or 3D-rendered CBCT models (P<0.05). Molar mesiodistal width and mandibular anterior arch width deviated significantly different from the gold standard in both methods. The largest mean differences of laser-scanned and 3D-rendered CBCT models compared to the gold standard were 0.12±0.23 mm and 0.42±0.53 mm, respectively. Most of the mean differences were not clinically significant. The intra- and inter-class correlation results were acceptable for all measurements(>0.830) and between observers(>0.801). Conclusion: The 3D-rendered CBCT images and laser-scanned models were useful and accurate alternatives to conventional plaster models. They could be used for clinical purposes in orthodontics and prostheses.

Assessment of the accuracy of laser-scanned models and 3-dimensional rendered cone-beam computed tomographic images compared to digital caliper measurements on plaster casts

Yousefi Faezeh,Shokri Abbas,Zahedi Foozie,Farhadian Maryam 대한영상치의학회 2021 Imaging Science in Dentistry Vol.51 No.4

Purpose: This study investigated the accuracy of laser-scanned models and 3-dimensional (3D) rendered cone-beam computed tomography (CBCT) compared to the gold standard (plaster casts) for linear measurements on dental arches. Materials and Methods: CBCT scans and plaster models from 30 patients were retrieved. Plaster models were scanned by an Emerald laser scanner (Planmeca, Helsinki, Finland). Sixteen different measurements, encompassing the mesiodistal width of teeth and both arches’ length and width, were calculated using various landmarks. Linear measurements were made on laser-scanned models using Autodesk Meshmixer software v. 3.0 (Autodesk, Mill Valley, CA, USA), on 3D-rendered CBCT models using OnDemand 3D v. 1.0 (Cybermed, Seoul, Korea) and on plaster casts by a digital caliper. Descriptive statistics, the paired t-test, and intra- and inter-class correlation coefficients were used to analyze the data. Results: There were statistically significant differences between some measurements on plaster casts and laser- scanned or 3D-rendered CBCT models (P<0.05). Molar mesiodistal width and mandibular anterior arch width deviated significantly different from the gold standard in both methods. The largest mean differences of laser- scanned and 3D-rendered CBCT models compared to the gold standard were 0.12±0.23 mm and 0.42±0.53 mm, respectively. Most of the mean differences were not clinically significant. The intra- and inter-class correlation results were acceptable for all measurements (>0.830) and between observers (>0.801). Conclusion: The 3D-rendered CBCT images and laser-scanned models were useful and accurate alternatives to conventional plaster models. They could be used for clinical purposes in orthodontics and prostheses.

Dental age estimation using cone-beam computed tomography: A systematic review and meta-analysis

Yousefi Faezeh,Mohammadi Younes,Ahmadvand Mehrnaz,Razaghi Parnian 대한영상치의학회 2023 Imaging Science in Dentistry Vol.53 No.2

Purpose: This systematic review aimed to investigate the correlation between chronological age and dental pulp volume in cone-beam computed tomography (CBCT). Materials and Methods: The literature was searched in 4 databases (PubMed, Scopus, Web of Science, and Google Scholar). Within each study, the outcome of interest was the correlation (r) between chronological age and pulp volume. A random-effect meta-analysis was conducted. Subgroup analysis was carried out according to sex and tooth type. Results: Of 5,693 identified studies, 27 fulfilled the inclusion criteria and were selected for meta-analysis. These articles focused on single-rooted teeth (n = 21), multi-rooted teeth (n = 6), maxillary teeth (n = 14), mandibular teeth (n = 6), and maxillary and mandibular teeth (n = 12). The relationship between chronological age and dental pulp volume was examined in the entire population (r = -0.67), men (r = -0.75), and women (r = -0.77) in single- and multi-rooted teeth. The results of the total population analysis showed a relatively strong negative relationship between age and pulp volume. Conclusion: This study suggested that CBCT is a reliable and repeatable tool for dental age estimation. A strong inverse relationship was observed between pulp chamber volume and age. Further studies on the correlation between chronological age and pulp volume of multi-rooted teeth may be beneficial.

Accuracy of maxillofacial prototypes fabricated by different 3-dimensional printing technologies using multi-slice and cone-beam computed tomography

Yousefi, Faezeh,Shokri, Abbas,Farhadian, Maryam,Vafaei, Fariborz,Forutan, Fereshte Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.1

Purpose: This study aimed to compare the accuracy of 3-dimensional(3D) printed models derived from multidetector computed tomography (MDCT) and cone-beam computed tomography (CBCT) systems with different fields of view (FOVs). Materials and Methods: Five human dry mandibles were used to assess the accuracy of reconstructions of anatomical landmarks, bone defects, and intra-socket dimensions by 3D printers. The measurements were made on dry mandibles using a digital caliper (gold standard). The mandibles then underwent MDCT imaging. In addition, CBCT images were obtained using Cranex 3D and NewTom 3G scanners with 2 different FOVs. The images were transferred to two 3D printers, and the digital light processing (DLP) and fused deposition modeling (FDM) techniques were used to fabricate the 3D models, respectively. The same measurements were also made on the fabricated prototypes. The values measured on the 3D models were compared with the actual values, and the differences were analyzed using the paired t-test. Results: The landmarks measured on prototypes fabricated using the FDM and DLP techniques based on all 4 imaging systems showed differences from the gold standard. No significant differences were noted between the FDM and DLP techniques. Conclusion: The 3D printers were reliable systems for maxillofacial reconstruction. In this study, scanners with smaller voxels had the highest precision, and the DLP printer showed higher accuracy in reconstructing the maxillofacial landmarks. It seemed that 3D reconstructions of the anterior region were overestimated, while the reconstructions of intra-socket dimensions and implant holes were slightly underestimated.

Magnetic resonance imaging study of incidental findings in the paranasal sinuses and ostiomeatal complex

Yousefi Faezeh,Mollabashi Mina,Shokri Abbas,Tavakoli Emad,Farhadian Maryam,Tavakoli Ali 대한영상치의학회 2022 Imaging Science in Dentistry Vol.52 No.1

Purpose: This study aimed to assess incidental abnormal findings in the paranasal sinuses and anatomical variations of the ostiomeatal complex (OMC) on magnetic resonance imaging (MRI) scans. Materials and Methods: MRI scans of 616 patients (mean age, 44.0±19.4 years) were evaluated. Prior to obtaining the MRI scans, a checklist of patients’ clinical symptoms was filled out after obtaining their consent. The Lund- Mackay classification was used to assess the paranasal sinuses and OMC. The prevalence of abnormal findings and their associations with patients’ age, sex, and subjective symptoms were analyzed by the chi-square test, independent-sample t-test, and analysis of variance. The level of significance was set at 0.05. Results: Abnormal findings in the paranasal sinuses were detected in 32.0% of patients, with a significantly higher prevalence in males (P<0.05), but no significant association with age (P>0.05). Epithelial thickening and retention cyst were the most common abnormal findings in the paranasal sinuses. According to the Lund-Mackay classification, 93% of the study population had normal sinuses (score<4). Concha bullosa and paradoxical concha were detected in 15.3% and 3.4%, respectively, with no significant association with the presence of septal deviation or Lund-Mackay classification (P>0.05). Conclusion: Considering the relatively high prevalence of abnormal findings in the paranasal sinuses, it appears that clinical symptoms alone are not sufficient to diagnose sinusitis. A more accurate strategy would be to assess radiographic images of the paranasal sinuses and use a classification system. Sinusitis should be suspected in patients receiving a high score in this classification.

CBCT findings of periapical cemento-osseous dysplasia: A case report

Eskandarloo, Amir,Yousefi, Faezeh Korean Academy of Oral and Maxillofacial Radiology 2013 Imaging Science in Dentistry Vol.43 No.3

Periapical cemento-osseous dysplasia (PCOD) is a subtype of cemento-osseous dysplasia that usually occurs in middle-aged black women. This report described a case of a 45-year-old Iranian woman who was diagnosed with PCOD on the basis of cone beam computed tomographic (CBCT) findings. CBCT enabled detailed visualization of the bone changes. This report described the special radiographic characteristics of PCOD, including discontinuity of the lingual cortex on the CBCT sectional and three-dimensional images.

Position of impacted mandibular third molar in different skeletal facial types: First radiographic evaluation in a group of Iranian patients

Shokri, Abbas,Mahmoudzadeh, Majid,Baharvand, Maryam,Mortazavi, Hamed,Faradmal, Javad,Khajeh, Samira,Yousefi, Faezeh,Noruzi-Gangachin, Maruf Korean Academy of Oral and Maxillofacial Radiology 2014 Imaging Science in Dentistry Vol.44 No.1

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the ${\beta}$ angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean ${\beta}$ angle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, ${\beta}$ angle showed no significant difference in different types of facial growth.