혈액 투석 환자에서 중심정맥 협착에 대한 스텐트 삽입술 : Wallstent Placement

임대승,노상필,이유선,정승현,김보영,이정우,강정아,김정희,이민수,정준용,최시완,정진옥,성인환,이강욱,신영태 충남대학교 의과대학 의학연구소 2002 충남의대잡지 Vol.29 No.1

Stenosis of central vein is a common complication arising after percutaneous subclavian vein catheter insertion performed for temporary vascular access in chronic renal failure patients undergoing hemodialysis. There are several treatment methods for the condition like percutaneous angioplasty(PTA), stent insertion, and surgery, but recent trend is toward PTA and stents. Among the patients diagnosed with chronic renal failure from March 1993 to May 2002 and undergoing hemodialysis through AV fistula, the 14 Patients in whom central vein stenosis arose were selected for the study. A total of 28 percutaneous interventions(5 PTA and 23 stent placement) were performed, and restenosis rate and the time taken till the restenosis in de novo lesions and instant lesions were compared. All 28 cases were operated successfully. The 14 cases that received both anigioplasty and stent placement initially. (de novo lesion : 14 cases), Among the 10 cases with de novo lesion that followed up more than 1 year, 3 cases are currently undergoing hemodialysis without restenosis, and the remaining 7 cases have recurred stenosis with the mean time to restenosis of 10.9 months. In the 7 cases in whom stenosis recurred, 11 interventions were done(instent lesion: 11 cases). 4 of these were using only ballon angioplasty with 100% restenosis rate and the mean time of 3 months until restenosis. The remaining 7 cases were using both balloon angioplasty and stent placement, also with 100% restenosis rate but with the mean time of 12 months until restenosis, which was later than the group receiving only balloon angioplasty. In treating the patients with central vein stenosis, stent placement seems to be more advantageous over PTA in terms of restenosis rate and the mean duration of patency. In the case of instent lesion, inserting the stent for the second time after stenosis recurred lengthened the duration of patency compared to performing balloon angioplasty alone.

골격성 Ⅲ급 부정교합에서 수직적 안모형태에 따른 혀와 설골의 위치 비교

우광수,윤정현,김상철 대한치과교정학회 2000 대한치과교정학회지 Vol.30 No.5

혀와 설골의 위치가 안모형태와 어떤 양태로 상관성을 갖는지 비교평가하기 위해 69명의 성인군과 63명의 성장군에서 두부방사선계측사진을 얻었다. 성인군과 성장군에서 SN 평면에 대해 큰 하악평면각을 갖는 군과 작은 하악평면각을 갖는 군으로 구분하여 다음과 같은 결론을 얻었다. 1.혀의 높이는, 큰 하악평면각을 갖는 군보다는 작은 하악평면각을 갖는 군에서, 성인군보다는 성장군에서 높게 나타났다. 2.설골의 수직적 높이는 큰 하악평면각을 갖는 군보다는 작은 하악평면각을 갖는 군에서, 성인군보다는 성장군에서 높게 나타났다. 3.연령과 안모형태의 수직적 분류에 따른 설골의 전후방적인 위치는 차이가 없었다. 4.두개저에 대한 설골의 기울기에 있어, 성인군보다 성장군에서 좀 더 가파른 경사도를 갖고 있었다. The purpose of this study was to evaluate the position of tongue and hyoid bone in relation to vertical facial patterns in the adult and child. Lateral cephalograms taken in adults(63 cases, 11.7 years in average age) and children(69 cases, 22.6 years in average age) were traced and measured about position and posture of tongue and hyoid bone using the horizontal and vertical reference lines. The angle of mandibular plane to SN plane was employed to classify the samples into groups of hypodivergent and hyperdivergent. The comparison of the tongue/hyoid bone measurements between hypodivergent group and hyperdivergent group in the adult and child were statistically executed with Student's t-test. The results were as follows ; 1.The tongue height was lower in the hyperdivergent group than in hypodivergent group, and higher in children than in adults. 2.The vertical height of hyoid bone was higher in hypodivergent group than in hyperdivergent group and also higher in children than in adults. 3.The anteroposterior position was of no significant difference in relation to age or vertical facial pattern. 4.The inclination of hyoid bone in relation to cranial base was steeper in children than in adults.

Cobb

이은우,임정수,손민균,김봉옥 大韓再活醫學會 1998 Annals of Rehabilitation Medicine Vol.22 No.4

우리나라 여행수지의 구조와 변동요인 분석

정병우,박수자 경성대학교 2000 論文集 Vol.21 No.2

This paper is designed to make analysis of the determinant factors on Korea's travel balance by using empirical work. This paper also resorts to a corroborative analysis of the deciding factors of Korea's travel balance with the help of a presumptive formula, which regards the revenue and expenditure of Korea travel balance as subordinary variables. As results of empirical work, We found that the per capital GNP of each countries are significant variable on determinant travel balance. Amount of trade between countries is also important factor on determinant travel balance. The real exchange rate is an important factor on determinant travel expenditures.

서울시 지하철 역사내부의 음향특성평가에 관한 연구

이상우,정대업,이수열,차상곤,심명석 대한건축학회 2003 대한건축학회논문집 Vol.19 No.4

This study aims at providing useful data for the design of underground stations through an extensive survey of acoustic properties in underground stations in Seoul. In order to improve the sound efficiency at the underground station, sound characteristics in the space of the underground station were studied. Architectural features of underground stations located in Seoul were examined by visiting every site and analyzing drawings. The distinction in architectural features of this study resulted in the line-side section, the shape of under-platform section and ceiling material. Number of underground stations was selected and categorized based on architectural features, such as line-side section, the shape of platform section and ceiling material. Each selected station was revisited and the noise levels were measured and compared with the architectural features. The study found that the Sum-Sik type is more efficient than the one of the Sang-Dae-Sik type, which can be used for subway stations. The semi-circular section for the railway-side seems to contribute on the attenuation of noise transmitting from trains to the platform. In addition, the aluminum absorbing panel, net luber and zinc plate (panel 40% and net 60%) as ceiling meterial are more efficient than the horizontal aluminum spendral panel, vertical aluminum spendral panel with line and zinc plate (panel 40% and net 60%), respectively.

Olfactory neuroblastoma 증례보고

박익수,이정근,노양호,김동우,김우형,이희철 大韓顎顔面成形再建外科學會 2003 Maxillofacial Plastic Reconstructive Surgery Vol.25 No.2

Olfactory neuroblastoma is an uncommon malignant tumor(just over 300 cases have been reported in the medical literature by 1996)arising within the nasal cavity. This tumor has a neuroectodermal cell origin and is believed to specifically arise from the olfactory epithelium. The tumor was ftrst decribed in the French medical literayure by Berger and associates in 1924 by the name esthesioneuropitheliome olfactif. The english version of this term is esthesioneuroblastoma, and current medical literture uses this name interchangeably with olfactory neuroblastoma. We experienced a case of olfactory neuroblastoma in the mxillary sinus. We treated this patient with tumor resection, chmotherapy and radiotherapy. And now, the patient has been following up for 2years 6month, but olfactory neuroblastoma is very rare. SO we report this case with a review of literature.

RISC 구조 프로세서 및 CMOS이미지 센서를 이용한 영상신호처리 시스템 개발

윤수정,김우식,김응석 한라대학교 2006 論文集 Vol.9 No.-

In this paper, we develop the on board type image processing system using the CMOS sensor and the RISC type main processor The main processor transmits YUV 4:2:2 type raw data captured by a CMOS image sensor to another processor(such as motion controller, PC, etc) via serial communication (rs232, SPI, I2C, etc) The role of another processor is line and obstacle detecting in image data received from the image processing board developed in this paper

고추 역병 저항성 재료의 특성평가와 종자 증식

김동우,김병수,배수연,한정혜 慶北大學校農業科學技術硏究所 2002 慶北大農學誌 Vol.20 No.-

역병 저항성 재료로 도입하여 유지하고 있는 PI123469, PI201234, PI201232, AC2258 (=Line 29), CM334, KC268, KC358, KC820, KC821, KC822, KC823 (Line 29 = AC2258), KC462, KC463, KC464 혹은 이들 유전자원에서 선발한 계통들의 역병에 대한 저항성 검정, 원예적 특성 조사 및 종자 증식을 실시하였다. PI123469, PI201234, PI201232, AC2258, KC823 에서 선발된 계통들이 가장 저항성이 강한 것으로 나타났다. 동일한 유전자원에서 선발한 계통간에도 저항성 수준에서 현저한 차이가 관찰되는 경우가 있었으며, 이러한 경우는 주로 유지 증식과정에 자연교잡이 일어난 결과로 추정되었다. 따라서 순도 높은 저항성 재료를 얻기 위해서는 봉지를 씌워 자식종자를 채종하는 것이 가장 안전하며, 다음으로는 계통 망실 혹은 망상을 이용하는 것이 바람직한 것으로 판단되었다. Resistance to Phytophthora capsici and horticultural characteristics of selections from the resistance sources such as PI123469, PI201234, PI201232, AC2258 (=Line 29), CM334, KC268, KC358, KC820, KC821, KC822, KC823 (Line 29), KC462, KC463, KC464 were evaluated and recorded in the process of seed increase. Selections of PI123469, PI201234, PI201232, AC2258, KC823 (Line 29 = AC2258) of them showed the highest level of resistance. A considerable difference in the level of resistance was observed between lines selected from the same sources. The variation between selections derived from the same source was thought to ve attributable to natural cross-pollination that may have occurred during the seed increase. Therefore, securing self-pollinated seed by wrapping the flower buds before anthesis would be necessary to obtain genetivally pure resistant lines. The next alternative would be to increase the seed in small net houses for single line or field cage.

전자선 증착장치 및 ITO 박막의 제작과 그 특성에 관한 연구

김수길,최범식,우정주,고년규,황정남,정원모,이철주 연세대학교 자연과학연구소 1982 學術論文集 Vol.9 No.-

태양 전지의 제작시 투명 전극막으로 쓰이는 ITO 박막을 제조하기 위하여 cathode 접지 방식의 전자총을 가진 정전 편향 집속형의 전자선 증착 장치를 제작하였다. 가속전압이 0∼15kV, 필라멘트 전류가 0∼28A, 두 전극판 사이의 간격이 11mm, anode와 deflector 사이의 간격이 30mm인 최적 실험조건하에서 생성된 전자선 spot의 크기는 길이가 20mm 폭이 1mm였으며, 전자선의 출력은 약 400W였다. 이 전자선 증착 장치를 이용하여 1600℃까지의 증발 온도를 가진 도체와 절연체 등을 쉽게 증착시킬 수 있었으며, 만드어진 ITO 박막은 약 5000Å의 두께에서 10^-1∼10^-2Ω·㎝의 비저항과 95%의 광투과율을 갖는다. An electron beam evaporator with a cathode grounded type electron gun was designed and constructed in order to deposit ITO thin films for photovoltaic applications. The optimum condition was observed with electode spacing of 11mm, 30mm between anode and deflector, a cathode inner diameter of 3mm and an anode inner diameter of 5mm. As the accelerating voltage varies from 0 to 15kV and ghe filament current from 0 to 28 A, the minimum electron beam spot has a 20mm length, and 1mm width and the output power ranges from 0 to 400W under the above optimum conditions. We can deposit materials whose evaporation temperature is over 1600℃ using this evaporator. And as a result ITO thin film showed a low resistivity of 10^-1∼10^-2Ω·㎝ and the transmittance of 95%.

혈소판 풍부혈장의 임상적 응용

하정완,김수관,조세인,이철우,정태영,김수흥,김영균 대한악안면성형재건외과학회 2001 Maxillofacial Plastic Reconstructive Surgery Vol.23 No.5

Platelet-rich plasma is an autologous source of platelet-derived growth factor and transforming growth factor beta that is obtained by sequestering and concentrating platelets by gradient density centrifugation. We have used platelet-rich plasma for bone graft, especially allobone graft, at implant surgery, sinus lift procedure, and cyst enucleation. This article is retrospective study from October 1999 to November 2000. All cases were good healing and clinical success.