암민코발트(Ⅲ) 착이온의 수소이온해리반응에 미치는 온도의 영향

오상오,박유철,이동철 慶北大學校 1982 論文集 Vol.33 No.-

The acid ionization constants of cis-aquo-bis(ethylenediamine)cobalt(Ⅲ) complexes have been spectrophotometerically (at 500 nm) measured in aqueous solution. According to curve fitting method, the equilibrium constants of reaction(1) and (2), K_1 and K_2 were measured at a various tempratures from analyzing the extinction coefficients of Co(Ⅲ) complex ions in a wide range of pH. 〔Co(en)_2(H_2O)_2〕^3+??〔Co(en)_2(OH)(H_2O)〕^2++H^+ (1) 〔Co(en)_2(OH)(H_2O)〕^2+??〔Co(en)_2(OH)_2〕^++H^+ (2) K_1 and K_2 values increased with increasing the temprature, were 1.5×10 exp (-6) and 1.5×10 exp (-10) respectively at 30℃ in 1M sodium nitrate solution : ΔH_1=7.5Kcal/mole, ΔH_2=6.5Kcal/mole and, ΔS_1=-2e.u., ΔS_2=23.6 e.u. The enthalphy and entropy changes indicate that the acid-base equilibria of Co(Ⅲ) ions are endothermic process and the effect of solvation is controlled over the reactions.

암민코발트(Ⅲ) 착이온의 수소이온해리반응에 미치는 온도의 영향

오상오,박유철,이동철 慶北大學校 物理化學硏究所 1984 硏究論文集 Vol.5 No.-

The acid ionization constants of cis-aquo-bis(ethylenediamine)cobalt(Ⅲ) complexes have been spectrophotometrically (at 500 nm) measured in aqueous solution. According to curve fitting method, the equilibrium constants of reaction(1) and (2), K_1 and K_2 were measured at a various tempratures from analyzing the extinction coefficients of Co(Ⅲ) complex ions in a wide range of pH. 〔Co(en)_2(H_2O)_2〕^3+ ⇔ 〔Co(en)_2(OH)(H_2O)〕^2+ + H^+ (1) 〔Co(en)_2(OH)(H_2O)〕^2+ ⇔ 〔Co(en)_2(OH)_2〕^+ + H^+ (2) K_1 and K_2 values increased with increasing the temperature, were 1.5×10 exp(-6) and 1.5×10 exp(-10) respectively at 30℃ in 1M sodium nitrate solution :ΔH_1=7.5㎉/mole, ΔH_2=6.5㎉/mole and, ΔS_1=-2e.u., ΔS_2=-23.6 e.u. The enthalphy and entropy changes indicate that the acid-base equilibria of Co(Ⅲ) ions are endothermic process and the effect of solvation is controlled over the reactions.

분사법에 의한 탄산칼슘 제조

신보철,한상오,김주호,송지훈,송근호,이광래 강원대학교 석재복합신소재제품연구센터 2001 석재연 논문집 Vol.6 No.-

본 연구는 탄산가스화법에 의한 탄산칼슘 입자 제조 공정에 있어서, 탄산가스로 채워진 반응기에 수산화칼슘 슬러리를 분사하는 방법으로 탄산칼슘 입자를 제조하였다. 수산화 칼슘의 농도(0.25~1.0wt%), 분사압력(0.5kgf /㎠~1.5kgf /㎠) 및 반응기 온도(20℃, 28℃)의 변화에 따른 생성된 탄산칼슘을 관찰하였다. 수산화 칼슘의 농도가 비교적 높으면(0.75wt%, 1.0wt%), 생성물의 pH와 전도도는 높게 나타났다. 분사압력에 의한 탄산칼슘 제조의 변화는 분사압력이 높아질수록(1.5kgf /㎠), pH와 전도도는 높게 측정되었다. 그러나, 수산화 칼슘의 농도와 분사압력의 변화가 탄산칼슘의 입자크기, 형태, 결정구조에 영향을 미치지는 않았다. 반응기의 온도가 28℃에서 생성된 탄산칼슘은 1.0㎛이하의 칼사이트 상 입자가 제조되었으며, 20℃에서 생성된 탄산칼슘은 0.5㎛이하의 칼사이트 상 입자가 제조되었다. 반응기의 온도가 낮아질수록 탄산칼슘 입자의 크기가 작아짐을 알 수 있었다. For the preparation of calcium carbonate particles from aqueous Ca(OH)2 slurry, carbonation reaction of aqueous Ca(OH)2 slurry was carried out by spouting the aqueous slurry of Ca(OH)2 into reactor filled with CO2 gas. The concentration of Ca(OH)2 varies from 0.25wt% to 1.0wt%, nozzle pressure from 0.5kgf /㎠ to 1.5kgf /㎠, and reactor temperature were set at 20℃ and 28℃. With relatively high concentration of 0.75wt% and 1.0wt% of Ca(OH)2, pH and conductivity of product-stream were observed high value. High pH and conductivity were observed at high nozzle pressure of 1.5kgf /㎠. The concentration of Ca(OH)2 and nozzle pressure, however, did not change the particle size and shape of calcium carbonate synthesized by carbonation reaction. The reaction temperature affected particle size. At reactor temperatures of 28℃ and 20℃, the particle sizes were about 1.0㎛ and 0.5㎛, respectively. Crystal structure of calcium calcium carbonate was of calcite. When reactor temperature was lower, the size of calcium carbonate particle was smaller.

회분식 반응기에서의 공정변수 변화에 의한 침강성 탄산칼슘 제조

신보철,한상오,김주호,송지훈,송근호,이광래 江原大學校 産業技術硏究所 2001 産業技術硏究 Vol.21 No.B

For the preparation of calcium carbonate particles from aqueous Ca(OH)2 slurry, carbonation reaction of aqueous Ca(OH)2 slurry was carried out by batch method the CO2 into reactor filled with aqueous slurry of Ca(OH)2. The concentration of Ca(OH)2 varies from 1.00 to 7.00wt%, reactor temperature at 20 and 40℃, and reactor pressure from atmospheric pressure to 6.0kgf/cm2. Crystal structure of calcium carbonate was of calcite, the particle size were about 0.05 ∼2.0㎛, and the particle shape was cubic and spindle. When reactor temperature was higher, particle size of calcium carbonate was bigger and particle share was varied, but reaction rate was increased. When reactor pressure was higher, particle size of calcium carbonate was smaller, particle shape was cubic, and reaction ramie was increased.

數學에서 問題解決의 學習原理 및 方法에 관한 硏究

오영선,이상기,최병로 대구대학교 부설 과학교육연구소 1992 과학교육 Vol.5 No.-

初, 中等 女學生의 體格과 體力의 相關關係에 관한 硏究

오성기 부산외국어대학교 교육대학원 1999 敎育論叢 Vol.- No.-

The purpose of this study was to investigate physique and physical fitness characteristics of primary school female students and middle school female students. 40 females(13age) of primary school student and 40 females(15age) of middle school student volunteered in the study respectively. 1. In primary school student, standing height, body weight, and girth of chest were positively correlated with strength, but sitting height was negatively correlated with physical fitness. 2. In middle school student, the results showed a low correlation between physique and physical fitness. As a result, physical fitness depend on participation in physical practice and not physique. Standing height was positively correlated with strength and sitting height negatively correlated with physical fitness like a result of primary school student. 3. Physique(standing height, body weight, sitting height and girth of chest) was developed by growth stage significantly. 4. Strength, power, and balance were larger in middle school student than in primary school student. And flexibility was larger in primary school student than in middle school student.

초음파신호의 특징추출에 의한 SUS 304강의 크리프 열화도 평가

오상균,안병욱 한밭대학교 생산기반기술연구소 2001 생산기반기술연구소 논문집 Vol.1 No.1

This study is to investigate the applicability of ultrasonic pattern recognition using ultrasonic wave. In order to study the feature of frequency range, sound velocity and attenuation coefficient was extracted from the time series of ultrasonic signals according to material degradation. Creep degradation and accompanied microstructal change in SUS 304 steel caused a decreasing tendency in sound velocity, lowering in center frequency and power spectrum, and increasing in attenuation coefficient. The quantitative extracting method of chaos feature using quadrant distribution value was applied to analyze the feature of frequency range and geometrical shape of chaotic attractor from ultrasonic signals of SUS 304. From the above results, the present study has been suggested a method which improve the accuracy on the evaluation of material degradation.

기지국 최적화를 위한 전역 탐색 알고리즘의 성능 해석

오정근,박미선,이성신,이민혁,변건식 동아대학교 정보기술연구소 2002 情報技術硏究所論文誌 Vol.10 No.1

In the design of mobile wireless communication system, Base station location is one of the most important parameters. Designing base station location, the cost of equipment makes low by combining various, complex parameters. We can solve this problem by combining optimization algorithm, such as Simulated Annealing, Tabu Search, Genetic Algorithm, Random Walk Algorithm that have been used extensively for global optimization. This paper shows the 4 kinds of algorithm to be applied to the base station location optimization of mobile communication system and then compares, analyzes the results and shows optimization process of algorithm.

소요동력 절감을 위한 트랙터용 로타리 커버의 개발

오종진,김기대,이현동,김찬수,김성환,나건영 충남대학교 농업과학연구소 2002 농업과학연구 Vol.29 No.2

본 연구에서는 로타리 경운작업시 흙 부착이 가장 많이 되고 소요동력에 큰 영향을 미치는 로타리 커버 내측에 흙이 부착되는 것을 방지하여 경운 소요동력의 절감에 기여할 수 있는 로타리 커버를 개발하는데 목적이 있으며, 그 구체적인 연구결과는 다음과 같다. 1. 본 연구의 수행을 위하여 트랙터의 로타리 경운소요동력을 측정하고자 트랙터 PTO축과 로타리 동력 입력축을 연결하는 PTO 동력 전달축을 이용하여 로타리 경운 소요동력 측정장치를 설계, 제작하였다. 2. 로타리에 장착한 흙부착 방지장치의 재질로는 스테인리스 스틸, 고무, PE 등을 사용하였다. 흙부착 방지장치 장착 로타리를 이용하여 로타리 경운시험을 통한 경운 소요동력을 측정한 결과 평균 일반 로타리는 52.18ps, 스테인리스 스틸재질 장착 로타리는 52.44ps, 고무재질 장착 로타리는 49.01ps, 그리고 PE재질 장착 로타리는 46.34ps의 소요동력을 나타냈다. 3. 흙부착 방지장치 장착 로타리를 이용하여 로타리 경운시험 후 부착된 흙의 양을 조사한 결과 평균 일반 로타리는 5.6㎏, 스테인리스 스틸재질 장찰 로타리는 5.7㎏, 고무재질 장착 로타리는 3.1㎏, 그리고 PE재질 장착 로타리는 2.7㎏으로 나타났다. 4. 실험결과를 토대로 유의수준 5%의 모평균 차에 의한 검정으로 분석해본 결과 스테인리스 스틸재질의 경우 흙부착 방지효과가 없는 것으로 나타났으며, 고무와 PE재질의 경우에 방지 효과가 있는 것으로 나타났다. 그 중 PE 재질이 소요동력과 흙부착 방지에 각각 11%, 52%의 감소효과가 있어 소요동력 감소 및 흙부착 방지 효과가 탁월한 것으로 나타났다. This study aims at investigating the realities of tractor rotary tilling and paving operations performed by farm families in the central part of the country, measuring the power requirement so as to find the energy-saving factors for tractor rotary tilling, and designing a device to prevent soil adherence to the inside of the rotary cover-this part is the most subject to soil adherence and affects the power requirement. As a result of rotary tilling tests using rotaries equipped with a soil adherence preventer, the power requirement values were measured to be 52.18, 52.44, 49.01 and 46.34 PS for general, stainless steel, rubber and PE rotaries, and as a results of measurement of the quantities of the sod adhered to rotaries after their tilling tests, on the average, the quantities were measured to be 5.6, 5.7, 3.1 and 2.7㎏ for general, stainless steel, rubber and PE rotaries, respectively. The PE rotary cover reduced the power requirement and soil adherence by 11 and 52%, respectively.

유한요소법에 의한 영구자석 전동기의 토오크 특성 해석

오연호,한성진,주수원 동아대학교 공과대학 부설 한국자원개발연구소 1994 硏究報告 Vol.18 No.2

This paper deals with finite element analysis of small motors using permanent field magnets. To improve the computational accuracy, adaptive finite element algorithm is applied and that estimates the normal directional magnetic field densities at the interfaces of neighboring meshes. Results show the flux distribution to be smoothen and the calculated torque to be improved.