http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A finite-element analysis of the connecting bolts of slewing bearings based on the orthogonal method
Ming Qiu,Jiafei Yan,Binhai Zhao,Long Chen,Yaoxing Bai 대한기계학회 2012 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.26 No.3
This paper presents an analysis of the main factors affecting the performance of connecting bolts for slewing bearings. For double row four-point contact ball bearings, major factors include the preload, friction coefficient and height of the bushes. First, bolt connection performances with different levels of each factor are calculated with the finite element method (FEM). Then, the calculation results are analyzed with the orthogonal method. The analysis indicates that the preload is the most important factor affecting the bolt connection performance, followed, to a lesser degree, by the height of the bushes. The friction coefficient is the least important factor.
Yi Zhang,Weiwei Jian,Yangchun Zhan,Yongchen Song,Mingjun Yang,Jiafei Zhao,Yu Liu,Weiguo Liu,Yong Shen 한국화학공학회 2015 Korean Journal of Chemical Engineering Vol.32 No.1
Densities of CO2+Dagang - formation brine solution were measured by a magnetic suspension balance(MSB) in the pressure range from (10 to 18) MPa, at the temperatures from (313.15 to 363.15) K and CO2 mass frac-tions at 0, 0.0101, 0.0198 and 0.0299. The experimental results revealed that the solution densities increased linearlywith the increasing pressure and CO2 concentration, while decreasing with the increasing temperatures in the experi-mental range. When the temperature increased from (313.15 to 363.15) K, the slopes of the densities versus (vs.) CO2mass fractions decreased from (0.193 to 0.106) g·cm−3. A correlation equation was developed based on thermody-namic theory and experimental data. The absolute average deviation between the correlation equation and the experi-mental data was 0.05%, and the maximum deviation was 0.37% for the density of CO2+water/brine solution in com-mon geological storage conditions. According to the density of CO2 - free brine and apparent molar volume of CO2 inbrine, the equal density temperature (Te) of CO2+Dagang brine solution was obtained at 464.67 K when pressure is10MPa, which means that the density of brine dissolved with CO2 will be less than that of CO2-free brine when thetemperature is higher than 464.67 K at 10MPa. In this work the formation temperature of the Dagang oilfield reser-voir is from 313.15 K to 363.15 K, which is lower than the equal density temperature. Therefore, the safety of CO2 stor-age in Dagang oilfield reservoir can be guaranteed.