부산광역시 자치구 교통개선사업계획 활성화방안에 관한 검토

최낙민,정헌영 釜山大學校 都市問題硏究所 1999 都市硏究報 Vol.8 No.-

Transportation Improvement Program(TIP) is a political methods that work out problems of the illegal parking, increase of traffic accident, walking trouble in dwelling space result from congestion of the street. The purpose of this study is to consider introduction of District-TIP in Pusan in aspects of organization, expert, finance, institution, and to suggest the methods. The following is the contents of this study. This study is suggested that first, it is need to separated expert from organization for introduce District-TIP in Pusan. Second, an increase in parking-income by usage of the special account is improvement program to invest finances. In conclusion, it is right that establish the base-rule in a municipal ordinance supporting for regulations to propel TIP.

Development of Simultaneous Analytical Method for ImidazolinoneHerbicides from Livestock using LC-MSMS

Hyo-Min Heo,Hyeong-WookJo,Kyu-Won Hwang,Jung-Hun Sun,Joon-Kwan Moon 한국농약과학회 2021 한국농약과학회 학술발표대회 논문집 Vol.2021 No.11

Simultaneous analytical method using LC/MSMS for imidazolinone herbicides from livestock (egg, milk, beef, pork and chicken) for monitoring was developed with QuEChERS preparation. Sample weighing (5g) in a 50mL conical tube, added 0.1 M potassium phosphate dibasic solution (5mL) was shaken for 10min. After 0.5mL 6 NHCl, 10mL acetonitrile were added, it was shaken for 10min. And QuEChERS extraction salt (Original method, 4g MgSO₄, 1g NaCl) were added to the sample in the 50 mL conical tube. The mixture was strongly shaken for 1 min and was centrifuged at 3,000g for 10 min. The acetonitrile layer was purification with dSPE (150mg MgSO₄, 25mg C18) and was centrifuged at 13,000g for 5min. The supernatant was filtered with a membrane filters (pore size: 0.2um) before analysis. ME (%, Matrix effect) for almost analytes range were -6.56 to 5.70%. MLOD (Method LOD) and MLOQ (Method LOQ) was calculated by S/N ratio. MLOQs were 0.01 mg/kg. The linear correlation coefficients (r2) were > 0.99 within the range of 2 ~ 100 ug/kg for all of the 3 imidazolinone herbicides. The percentages (of imidazolinone herbicides) recovers were in the range of 84.1 ~ 110.6% (0.01mg/kg level), 90.8 ~ 97.1% (0.1mg/kg level) and 94.4 ~ 102.1% (0.5mg/kg level) within the validation criteria (recover; 70-120% with RSD < 20%)

초기 자궁내막암 환자에서의 복강경유도하 질식 자궁절제술과 복식 자궁절제술에 대한 비교 연구

김민규 ( Min Kyu Kim ),최동석 ( Dong Seok Choi ),김우영 ( Woo Young Kim ),최철훈 ( Chel Hun Choi ),김태중 ( Tae Joong Kim ),이정원 ( Jeong Won Lee ),김병기 ( Byoung Gie Kim ),이제호 ( Je Ho Lee ),배덕수 ( Duk Soo Bae ) 대한산부인과학회 2006 Obstetrics & Gynecology Science Vol.49 No.12

Objective: To compare laparoscopic surgery with conventional abdominal surgery in patients with early stage endometrial cancer. Methods: A retrospective review of 63 patients with early stage endometrial cancer managed between March 2003 and May 2005. Two groups were defined whether they had been treated by laparoscopy (case group: n=26) or by laparotomy (control group: n=37). We compared age, body mass index (BMI), hemoglobin change, operation time, number of pelvic lymph nodes, hospital stay, case with adjuvant treatment and recurrence between two groups. Results: There was no statistical difference in characteristics (age, BMI, nulliparity, previous abdominal surgery, FIGO stage, histologic grade). between case and control group. In addition, there was no statistical difference in operation data and outcomes between two groups. Hemoglobin changes were 1.1 g/dL (case group) vs 1.7 g/dL (control group) (p=0.072). Operation time was 131 min vs. 115 min. The numbers of lymph nodes obtained were 8.7 vs 7.7 (right) 9.2 vs. 7.6 (left). Hospital stays were 8.4 vs. 9.2 days. Adjuvant treatment cases were 7 vs. 15. Recurrent case was one in each group. Two patients initially evaluated by laparoscopy were converted to laparotomy due to bleeding and adhesion. Conclusion: Laparoscopic surgery for treatment of early endometrial cancer is a safe and effective alternative to laparotomy . However, long-term survival and risk of recurrence have yet to be determined.

Artificial Shrinkage Improves Survival and Embryonic Quality of Vitrified Bovine Blastocysts Derived from IVF and SCNT

Sung-Hun Min,Joo-Hee Hong,Humdai Park,Deog-Bon Koo 한국동물생명공학회(구 한국동물번식학회) 2011 발생공학 국제심포지엄 및 학술대회 Vol.2011 No.1

Freezing of bovine blastocysts has been proposed as a tool to improve the feasibility of cattle production by using embryo transfer technique. However, the low efficiency of frozen-thawed embryos survival and further development is a crucial problem. Thus, we examined the effect of artificial shrinkage before vitrification of bovine expanded, hatched and SCNT embryos on the survival rate, apoptosis index and further development after thawing. Expanded, hatched and SCNT embryos were vitrified after artificial shrinkage, which was performed by puncturing the blastocoele with a pulled pasteur pipet. Artificial shrinkage of the blastocyst was achieved after pushing a pulled pasteur pipet into the blastocoele cavity until it contracted. The shrunken and not shrunken embryos were exposed to cryoprotectant solution in 7.5% ethylene glycol-7.5% DMSOPBS with 20% FBS for 5 min. They were placed in a small volume of vitrification solution (15% ethylene glycol+15% DMSO+PBS+20% FBS+0.5 M sucrose) and plunged into liquid nitrogen on a cryotop. Then, after thawing, cryoprotectant was diluted in 1.0 M, 0.5 M, 0.25 M, and 0 M sucrose for 1, 3, 5, and 5 min. Under the optimal conditions, overall efficiency of the survival rate of bovine expanded, hatched, SCNT embryos in artificial shrinkage groups was higher compared with non-artificial shrinkage groups (p< 0.05). Especially, the numbers of TUNEL-positive nuclei in artificial shrinkage groups were significantly reduced than those of non-artificial shrinkage groups among frozen-thawed expanded, hatched, and SCNT blastocysts (p< 0.05). Our results showed that survival rates in cryopreserved expanded, hatched, SCNT embryos could be improved by reducing the fluid content. Therefore, we suggest that artificial shrinkage method is a effective pretreatment technique for the cryotop vitrification of expanded, hatched, SCNT bovine blastocysts.

Eucheuma spinosum으로부터 다양한 효모를 이용한 바이오에탄올 생산

김민지(Min-Ji Kim),김정수(Jung-Soo Kim),라채훈(Chae Hun Ra),김성구(Sung-Koo Kim) 한국생물공학회 2013 KSBB Journal Vol.28 No.5

Ethanol fermentations were performed using separate hydrolysis and fermentation (SHF) processes with monosaccharides from pretreated seaweed, Eucheuma spinosum as the biomass. The pretreatment was carried out with 11% (w/v) seaweed slurry and 150 mM H₂SO₄ at 121℃ for 40 min. Enzyme hydrolysis after H₂SO₄ pretreatment was performed with Celluclast 1.5 L at 45℃ for 24 h. Five % active charcoal were added to hydrolysate to removed 5-hydroxy methylfurfural. Ethanol fermentation with 11% (w/v) seaweed hydrolysate was performed for 72~96 h using Kluyvermyces marxianus, Pichia stipits, Saccharomyces cervisiae and Candida tropicalis. Ethanol concentration was reached to 18 g/L by K. marxianus, 16 g/L by P. stipitis, 15 g/L by S. cerevisiae and 10 g/L by C. tropicalis, respectively. The ethanol yield from total monosugar was obtained 0.50 and ethanol productivity was obtained 0.38 g/L/h by K. marxianus.

항고혈압성 안지오텐신 전환효소 저해제를 생산하는 새로운 효모의 선별 및 저해물질 최적 생산조건

강민구 ( Min Gu Kang ),김하근 ( Ha Kun Kim ),이성훈 ( Sung Hun Yi ),임성일 ( Sung Il Lim ),이종수 ( Jong Soo Lee ) 한국균학회 2011 韓國菌學會誌 Vol.39 No.3

Forty eight strains of yeast were cultured in potato dextorse(PD) broth at 30˚C for 24 hr and centrifuged with 12,000 rpm for 20 min. After concentrated the cultures, antihypertensive angiotensin I-converting enzyme(ACE) inhibitory activities of its concentrates were investigated. Among them, the concentrates from Saccharomyces cerevisiae Y183-3 showed the highest ACE inhibitory activity of 71.8%. The ACE inhibitor from Saccharomyces cerevisiae Y183-3 was maximally produced when Saccharomyces cerevisiae Y183-3 cultured in PD broth at 30˚C for 36 hr.

측정 자세의 변화에 따른 맥의 변화 특성: 선 자세, 앉은 자세, 누운 자세

권선민 ( Sun Min Kown ),강희정 ( Hee Jung Kang ),이상훈 ( Sang Hun Lee ),임윤경 ( Yun Kyoung Yim ),이용흠 ( Yong Heum Lee ) 대한경락경혈학회 2009 Korean Journal of Acupuncture Vol.26 No.4

Objectives: Informations on pulse diagnosis in literature are based on diagnosing pulse waveforms on supine posture. However, today`s pulse waveforms are measured on various postures for the convenience of patients or doctors. For objective measurement, the effect of posture on the pulse waveforms should be considered. The objective of this study was to find posture-related changes in the radial pulse waveforms. Methods: We used an instrument, DMP-3000(DAEYOMEDI Co., Ansan, Korea), measuring radial pulse waveforms noninvasively by tonometric method. 25 male subjects participated in the trial. Before measuring radial pulse waveforms subjects had rest for 5 min. The pulse waveforms were measured on the left wrist. Each subject underwent this course on the supine, sitting, and standing posture. We analyzed pulse waveforms with Height-parameters, Time-parameters, Energy, and Elastic rate. Results: Height-parameters(h1~h5) on the supine posture were bigger than those on the sitting and standing posture. In case of Time-parameters, the parameters making up systolic time decrease in order of on standing, sitting, and supine position. However, systolic time and diastolic time didn`t have any changes. Energy of pulse was the biggest on supine posture and Elastic rate on standing posture. Conclusions: In this study we found that posture changes affect radial pulse waveforms. For quantification of the changes, more trials should be done. After analyzing much data we might apply parameters of pulse waveforms changed by posture. Also, we might diagnose special disease with properties of pulse waveforms by posture.

온도 유지시간 제어를 적용한 하이브리드 분말 압출 공정을 통한 요구 특성의 스퍼기어 제조

이경훈(Kyung Hun Lee),황대원(Dae Won Hwang),김병민(Byung Min Kim) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.8

본 연구는 압출 시 성형온도를 유지하여 Zn-22Al 합금분말의 성형성을 향상시키는 하이브리드 분말 압출 공정의 개발 및 온도 유지시간이 압출된 스퍼기어의 기계적 특성에 미치는 영향을 조사하기 위해 수행되었다. 피치원 지름 1.8mm 의 소형 스퍼기어는 압출온도 290, 300, 310℃에서 성형되었다. 볼밀시간 32h 의 Zn-22Al 합금분말을 압출온도 310℃에서 압출 시 표면 결함이 없는 소형 기어가 제조되었다. 경도분포는 기어 중심부와 치형부에서 불균일하였고 소결공정 후 내부 변형에너지의 차이로 인해 내부균열이 발생하였다. 위와 같은 문제를 해결하기 위해 온도 유지시간 제어를 이용한 하이브리드 압출 연구를 수행하였다. 압출된 스퍼기어의 평가는 압출하중, 비커스 경도 및 치수정밀도 측정을 통해 이루어졌다. 온도 유지시간 15min 에서 압출된 스퍼기어의 기계적 성질이 가장 우수하였다. In this study, a hybrid powder-extrusion process involving the control of temperature dwelling time for improving the formability of Zn-22Al powder was developed and the effect of dwelling time on the mechanical properties of a spur gear with a pitch circle having a diameter of 1.8 mm was investigated. General extrusion experiments were carried out at different temperatures such as 290, 300, and 310°C. Spur gears with good qualities and without any surface defects were obtained in the case of extrusion temperature of 310°C and ball-milling duration of 32 h. The Vickers hardness distribution was non-uniform, and after the sintering process, an internal crack was generated because of the different deformation energy between gear central part and teeth. To overcome the abovementioned problems, research on controlling the dwelling time of the extrusion temperature in the powder-extrusion process was carried out. Good-quality spur gears were obtained when the dwelling time was 15 min.

오죽잎차와 오죽죽순차의 성분 분석 및 항산화 효과

김상민 ( Sang Min Kim ),전제승 ( Je Seung Jeon ),강석우 ( Suk Woo Kang ),김우리 ( Woo Ri Kim ),이기덕 ( Ki Deok Lee ),엄병헌 ( Byung Hun Um ) 한국응용생명화학회 2012 Journal of Applied Biological Chemistry (J. Appl. Vol.55 No.2

Nutritional components of Ojuk leaf tea and Ojuk shoot tea prepared from the leaves and shoots of black bamboo (Phyllostachys nigra Munro) by tea manufacturing process were evaluated. In addition, the extraction yield of water soluble components from these teas in the general tea brewing condition (water extraction in 80oC for 10 min.) and the contents of polyphenol and flavonoid were compared with not only the dried raw materials, but also green tea and mate tea. Finally, offline and online scavenging activities against 2,2`-azino-bis(3-ethylbenzothiazoline- 6-sulphonic acid) (ABTS) and di(phenyl)-(2,4,6 trinitrophenyl)iminoazanium free radicals were investigated to evaluate the antioxidant activity and explore the components showing ABTS free radical scavenging activity from tea infusion. These results demonstrated that these teas from black bamboo contain various nutritional components and can be used as traditional tea beneficial to human health.

열처리가 Al-Mg 코팅 강판의 내식성에 미치는 영향

정재훈(Jae-Hun Jung),양지훈(Ji-Hoon Yang),송민아(Min-A Song),김성환(Sung-Hwan Kim),정재인(Jae-In Jeong),이명훈(Myeong-Hoon Lee) 한국표면공학회 2014 한국표면공학회지 Vol.47 No.4

Double layer films which consisted of aluminum(Al) and magnesium(Mg) have been prepared by e-beam deposition. The structure, alloy phase, and corrosion resistance of the prepared films were investigated before and after heat treatment. The first (bottom) layer fixed with Al, and the thickness ratio between Al and Mg layers has been changed from 1 : 1 to 5 : 1, respectively. Total thickness of Al-Mg film was fixed at 3 μm. The cold-rolled steel sheet was used as a substrate. Heat treatment was fulfilled in an nitrogen atmosphere at the temperature of 400℃ for 2, 3 and 10 min. Surface morphology of as-deposited Al-Mg film having Mg top layer showed plate-like structure. The morphology was not changed even after heat treatment. However, cross-sectional morphology of Al-Mg films was drastically changed after heat treatment, especially for the samples heat treated for 10 min. The morphology of as-deposited films showed columnar structure, while featureless structure of the films appeared after heat treatment. The x-ray diffraction data for as-deposited Al-Mg films showed only pure Al and Mg peaks. However, Al-Mg alloy peaks such as Al3Mg2 and Al12Mg17 appeared after heat treatment of the films. It is believed that the formation of Al-Mg alloy phase affected the structure change of Al-Mg film. It was found that the corrosion resistance of Al-Mg film was increased after heat treatment.