http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Effect of Ni and Si addition on electrical, tribological and corrosion behavior of novel Cu-Zn alloy
Saravanan. R,Suresh. P,Prabu. M,Bagyalakshmi. Pd 한양대학교 세라믹연구소 2022 Journal of Ceramic Processing Research Vol.23 No.4
The goal of this research is to evaluate the electrical, dry sliding wear and corrosion behaviour of copper-zinc alloy reinforcedwith Ni and Si through Powder Metallurgy (P/M) technique. Six different wt. % of novel copper-zinc alloy are considered forthis research study namely 90Cu-10Zn, 88.16Cu-10Zn-1.5Ni-0.34Si, 85Cu-15Zn, 83.16Cu-15Zn-1.5Ni-0.34Si, 80Cu-20Zn and78.16Cu-20Zn-1.5Ni-0.34Si. The fabricated composites were characterized by using Scanning Electron Microscope (SEM) withEnergy Dispersive Spectroscopy (EDS) line mapping. The electrical, wear and corrosion behaviour of the fabricatedcomposites was assessed. The hardness of the fabricated composites was evaluated using Vickers Hardness Tester. Theelectrical conductivity was assessed using four-point probe tester. The result shows a significant improvement on electrical andtribological properties by increasing the wt.% of Zn, Ni and Si led of the composites. The research results concludes that78.16Cu-20Zn-1.5Ni-0.34Si composite possessed better hardness about 287 HV and the electrical conductivity about 121%IACS. The investigation result shows that Zn acts as a vital role to enhance the properties in all aspects. Also, theexperimentation results portrays that Cu-20Zn-1.5Ni-0.34Si composite possessed better specific wear rate and coefficient offriction such as 1.85 * 105 mm3/N-m and 0.29 respectively.