아시아 종교의 다원성에 관한 연구

황순환 대전신학대학교 2002 신학과 문화 = THEOLOGY AND CULTURE Vol.11 No.-

인간 이해와 기독교 선교 : 철학 그리고 선교신학적 측면에서

황순환 대전신학대학교 2004 신학과 문화 = THEOLOGY AND CULTURE Vol.13 No.-

선교사적 측면에서 고찰한 기독교 선교의 전개

황순환 대전신학대학교 2005 신학과 문화 = THEOLOGY AND CULTURE Vol.14 No.-

21세기 총회 선교신학의 방향성과 과제

황순환 대전신학대학교 2007 신학과 문화 = THEOLOGY AND CULTURE Vol.16 No.-

다원적인 세계속에서 한국교회의 선교적 과제

황순환 대전신학대학교 2003 신학과 문화 = THEOLOGY AND CULTURE Vol.12 No.-

신학교육에 있어서 사회복지교육의 중요성

황순환 대전신학대학교 2008 신학과 문화 = THEOLOGY AND CULTURE Vol.17 No.-

사출성형 CAE를 이용한 스파이럴 금형의 형상 검증에 관한 연구

황순환,이후진,한성열 한국기계기술학회 2021 한국기계기술학회지 Vol.23 No.2

Recently, the demand for reliability verification is increasing while designing and manufacturing molds using injection molding computer aided engineering(CAE). When performing flow analysis verification, a spiral mold is produced and compared with CAE. Because of the spiral shape, we needed a comparative evaluation with the flow distance of products with different forms. So, we compared the weight and flowed length using CAE. Variables are the change in the width of the spiral shape and the shape of the bar and plate. When the width of the spiral shape is 23mm rather than 15mm, the flow distance flows 30∼70mm more, with a maximum difference of 13%. As a result of comparing the spiral shape and the long square shape with the same width, the spiral shape had a flow distance of 60 to 105mm further, and a difference of up to 28% was found. As a result of comparing the plate shape and the spiral shape with a 15mm width product, the spiral shape has a flow distance of 310∼380mm further, and a difference of up to 82% is different.

언어 습관이 세계관에 미치는 영향

황순환 대전신학대학교 2006 신학과 문화 = THEOLOGY AND CULTURE Vol.15 No.-

아시아의 종교적 다원성 속에서의 선교적 과제

황순환 한국선교신학회 2002 선교신학 Vol.6 No.-

This thesis critically analyzes the present condition of Christianity in Asia. It notes the shift of World mission from a Western perspective to Asian perspective. It also provides a descriptive analysis of the factors affecting the spread of Christianity in Asia. Concrete recommendations are drawn to fortify Asian missions. Furthermore, this thesis discusses the role of Korean Christians, as a majority, in the spread of the gospel. The Christian population in Asia is considered statistically as a marginalized denomination with less than ten percent (10%) share of the total world Christian population. However, considering the thirty percent (30%) Christians around the world, Asian Christians constitute a minute proportion to Ule face of the Christian faith. This is taken in the context of a global perspective that Christian Mission in Asiastill continues to be in the state of passivity despite the numbers of missions sent abroad to spread the gospel. The 21st century World Mission has shifted its target to the Asian third world countries. W. B?lman stressed that the center of mission is moving towards the 3rd world countries. Missions have taken into account the number of population and the di stinctive features of Asia. W. B?lman also noted that before the 21st century the Christian population among the whites is more overwhelming than the nonwhite Christians. In the turn of the 21st century, the growth has changed. This is manifested in the growth of non-white Chri stian population in Asia after the evangeli zation by the western missionaries. To date, the 3rd world Christians has taken quantum leaps to share the gospel to their neighboring countries. Despite the missions conducted by churches and Christians in Asia, the people has stayed steadfast to passivity to the acceptance of the gospel. One distinct feature of Asian roots is its various cultural heritage. These roots have been celebrated and preserved to take its truest color. The spirit evolved by this heritage enlivens the Asians. Throughout the years missions have approached these cultures in the light of western ideology and theology. The differences created a conflict and resulted to the passivity of Asians to Christian faith. The author agrees with Aloysius Pieris that poverty is a major factor in the resistance of the Asians to accept the gospel. The control of st ru ctured institutions, s uch as government, eco nomy and education, have hindered the influx of new fa ith. Aloysius Pieris calls this forced poverty. Asian countries have been the crad les of world religions. The growth of these religions all ied the growth of civilization, which strengthened believers in Asia. Some of these world religions are: Shintoism, Confucianism, Buddhism, Taoism, Islam and even Christianity. These religions have guided believers through their respective scriptures and the tides of civilization strengthened these faiths among Asians. Missions have been idealistic to penetrate the threshold of these major religions and make them accept the Christian faith. But the plurality of religions curtailed the light of Christian faith to the Asians. The Asian population plays a vital challenge to the world Christian Mission. It constitutes a big portion of the world population in which the Christian faith has not reached. The immersion of missionaries to do the task of sharing the gospel has been in vain. Passivity of Christians has always been the reason for the resistance. However, this research, P9sits that mission should be revolutionized to achieve its goal of sharing the gospel. Choan Seng Song suggests Transpositional Theology to carry out the mission. This is the change of approach to introduce the gospel based on Asian perspective. Aloysius Pieris calls this as Asian style gospel. Adaptation to the different cultures in Asia through mission research will play crucial role in the attainment of the task. With the adequate knowledge of the culture, genuine empathy to the experiences, situation, condition and status of Asians will ease the immersion of missionaries in a different culture. The establishment of oneness to the particular group of Asian will be timely for the inculcation of the Christian scripture. Thus, increasing the chance to spread the gospel successfully. Since oneness is very important to the spread of the gospel, Asians are more capable of understanding, adapting, empathizing with fellow Hinduism, Asians. This is called by Choan Seng Song as the 3rd ideology that only Asians can see the Asian roots. Theology school system should restructure its westernized method of teaching theology. Western missionaries have left Asian Theology schools with teachings designed in western context and it has effected the spread of the gospel by Asians also using the western approach. Students of theology will appreciate more the teachings of, the gospel when the context is based on their Asian background and experiences. Appreciative students will be potent instruments in the spreading of the truth. Forced poverty as stated earlier has been identified by Aloysius Pieris to hinder the spread of Christianity, which is in contrast to voluntary poverty. Voluntary poverty manifests the features of a true Christian. He who chooses to be poor truly believes in the doctrine and wholeheartedly serves for the spread of the gospe\. He is a selfless servant of the church and tries to live a life that of Jesus Christ. World mission is optimistic that the realization of its vision will be achieved. Asian Christians comprises only less than ten percent (10%) of the Asian population. Despite the Chri stianityis unpopularity in Asia, Korea has reached a majority in number. Recently, statistics shows that twenty five percent (25%) of the Korean population are Christians. Unlike other Asian countries with framed religions such as Japan (Shintoism), India (Hinduism/ Buddism), China (Confucianism), Korea has opened its horizon to other religions, which includes

Injection mold design of reverse engineering using injection molding analysis and machine learning

황순환,김종선 대한기계학회 2019 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.33 No.8

Plastic composites are used in vehicle components to improve fuel efficiency. Thus, the warpage of injection-molded plastic parts has become a quality issue. Factors, such as product shape and thickness, resin, and other injection molding conditions, can be modified to improve the warpage problem. However, if these factors are set with no possible adjustments, reverse engineering may be required. Reverse engineering is a difficult process that requires many trials and errors; thus, it is only used as a last resort. With respect to the warpage issue, reverse engineering considers the following: (1) Predicting and (2) modeling the warpage in opposite directions. Autodesk Moldflow Insight accommodates these key considerations, but many researchers are reluctant to use it. Although existing injectionmolding analysis programs are mainly used to predict qualitative results, computer-aided engineering (CAE) for reverse engineering requires quantitative analysis. Hence, the considerations are different from the existing analyses. An error in warpage prediction may lead to a costly mold modification because of the molds' complex structures. Quantitative warpage prediction for reverse engineering depends on process variables; thus, understanding how warpages are affected by uncertain process variables is important to improve the reliability of reverse engineering. Moreover, even if appropriate process variables are set, they cannot be applied due to tolerance in lengths. For this reason, mold shrinkage must be identified before designing a mold. This study conducted injection molding analysis for a radiator tank that uses glass fiber-reinforced plastic using Autodesk Moldflow Insight 2018.2. Data for warpage prediction were generated in accordance with five process variables to identify the relationship between the level of warpage and process variables. CAE also showed the level of mold shrinkage that can reduce warpage. In addition, a predictive model was created using the multilayer perceptron (MLP)-supervised learning technique, which is a deep learning method for artificial neural networks. The predictive model was compared with typical regression models, such as polynomial regression (also known as response surface model), EDT and RBF, to determine the optimal approximation model. The real modeling time for a radiator tank product is 1 h, but the MLP approximation model required only 1 min and 8 s to perform 8530 iterations with a similar reliability.