http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이화련,홍인석,티투안,조용섭,Lee, Hwa-Ryun,Hong, In-Seok,Trinh, Tu Anh,Cho, Yong-Sub 한국진공학회 2009 Applied Science and Convergence Technology Vol.18 No.3
양성자기반공학기술개발사업단에서는 설치된 금속이온주입기를 이용하여 금속이온의 인출 시험 중에 있으며 120keV의 금속 이온주입이 가능하다. 현재 코발트 이온 주입의 타당성 확인을 위한 특성시험을 수행하고 있다. 이온원에 알루미나 도가니를 설치하여 분말 코발트 염화물을 고온($648^{\circ}C$) 가열에 의한 증기화로 인하여 플라즈마 방전이 되도록 하였다. 아크전압 120V, EHC 출력 250W에서 코발트 이온을 인출하기 위한 플라즈마를 발생하고 유지할 수 있었다. 코발트 이온 빔 전류는 플라즈마 내 아크전류에 의존하였으며 0.18A일 때 최대 빔전류 $100{\mu}A$를 얻을 수 있었다. 질량분리전자석에 의해서 $Co^+$와 $CoCl^+$, $Cl^+$ 이온의 첨두 빔 전류 비율을 확인하였고 전체 이온 대비 $Co^+$ 이온의 비율이 70% 수준을 유지함을 알 수 있었다. $Co^+$ 이온을 알루미늄 시료에 빔전류 $10{\mu}A$, 90분 동안 이온주입 하여 RBS(Rutherford Backscattering Spectrometry)분석법으로 $1.74{\times}10^{17}#/cm^2$의 이온량을 확인하였다. Proton Engineering Frontier Project (PEFP) has supplied the metal ions to users by using an installed metal ion implanter of 120 keV. At present a feasibility study is being performed for a cobalt ion implantation. For a cobalt ion extraction we studied to sustain the high temperature($648^{\circ}C$) for metal ions vaporization from a cobalt chloride powder by using an alumina crucible in the ion source. The temperature condition of the crucible was satisfied with the plasma generation at the arc current of 120V and EHC power of 250W. The extracted beam current of $Co^+$ ions was dependent on the arc current in the plasma. The maximum beam current was $100{\mu}A$ at 0.18A of the arc current. The 3 peak currents of the extracted ions such as $Co^+$, $CoCl^+$ and $Cl^+$ were obtained by adjusting a mass analyzing magnet and the $Co^+$ ion beam peak current fraction as around 70% in the sum of the peak currents. The fluence of the implanted cobalt ions at the $10{\mu}A$ of the beam current and 90 minutes of the implantation time into an aluminum sample as measured around $1.74{\times}10^{17}#/cm^2$ by a quantitative analysis method of RBS (Rutherford Backscattering Spectrometry).
GNU Radio와 USRP 플랫폼을 이용한 OFDM및 COFDM 구현에 관한 연구
디엔 뉴옌 반(Dien Nguyen Van),투안 뉴옌 안(Tuan Nguyen Anh),티엔 호아 뉴옌(Tien Hoa Nguyen),반 둑 뉴옌(Van Duc Nguyen),노승환(Soonghwan Ro) 한국정보기술학회 2014 한국정보기술학회논문지 Vol.12 No.2
SDR allows users to adjust a system with its flexibility and re-configurability for any frequency band and different modulation of various physical parameters by using programmable hardware and software. In this paper, we implement an Orthogonal Frequency Division Multiplexing (OFDM) system with and without channel coding blocks based on Software-Defined Radio. Quadrature amplitude modulation QAM-16, convolutional encoder with block interleaving algorithm and hard decision Viterbi decoder are deployed for the implementation. Different scenarios have been implemented in real-time wireless transmission in order to evaluate the Packet Failure Rate (PFR). The results show that the introduction of channel coding reduces the PFR of transmitted data signals.