http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
TRNSYS를 이용한 태양열 온수 시스템의 열성능에 관한 해석적 연구
김병기(B.G. Kim),장환영(H.W. Jang),서정세(J.S. Suh) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
A solar water heating system with auxiliary heater was simulated using the TRNSYS. Simulations were performed for three different hot water load temperature(60,70,80℃) and for two types of daily hot water volumes(140㎏, 280㎏) and three types of storage tank volumes(200,300,400㎏). Three patterns of daily hot water consumption profile were used in the present study(continuous, morning and evening). The results show that the increase in solar fraction depends on the load profile and volume, temperature setting, as well as the storage tank volume. Hot water draw profile and volume have a large effect on the performance of the SDHWS, the continuous profile has the highest solar fraction. The annual solar fraction of the system, at the weather conditions of Jinju is , at best, approximately 83% at continuous load pattern, the 140㎏ of load volume, 400㎏ of tank volume and the 60 degree of load temperature.
모바일 전자장비 냉각용 Micro-CPL 의 재질 변화에 따른 열전달특성에 대한 해석
김병기(B.G. Kim),장환영(H.W. Jang),서정세(J.S. Suh),황건(G. Hwang),문석환(S.H. Moon) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.6
Using Micro Electro Mechanical Systems(MEMS) technologies, a micro-capillary pumped loop was designed, fabricated and tested to cool electronics or MEMS type devices. In this study, heat transfer characteristics of micro-capillary pumped loop is analyzed. Especially, this study was focused on heat transport capacity of micro-CPL with the materials of a cover and substrate. The micro-CPL is a bend type which has a grooved wick in evaporator region and a bend tube in condenser region separately. And a micro-CPL consists of two wafer with a cover and substrate. An analysis of heat transfer and pressure drop was conducted under various materials of a cover and substrate with silicon, glass and copper. In order to operate optimally micro-CPL, the optimal design of each part that evaporator, condenser, vapor and liquid line is necessary. In this study, a modified model was suggested with a optimal design of each part. The results of heat transfer characteristics will be discussed.