http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스크린 프린팅을 이용한 태양전지 에미터 형성에 관한 연구
공대영(Gong, Dae-Yeong),양두환(Yang, Doo-Hwan),김선용(Kim, Sun-Yong),이용우(Lee, Yong-Woo),권태영(Kwon, Tae-Young),윤석우(Yun, Seog-Woo),이광일(Lee, Kwang-Il),이준신(Yi, Jun-Sin) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
This paper shows that you can achieve high quality N+ emitter layers using a screen printable phosphorous diffusion paste and firing in an infrared belt furnace. Spreading resistance measurement from a beveled sample is used to measure carrier concentration as a function of depth for different phosphorous concentrations. Contours of estimated sheet resistance are shown for different processing conditions. This paper describes newly developed low cost phosphorous pastes. It shows the characterization of the newly developed phosphorous paste (DP99-038). This low cost pastes can easily be printed and make 16% efficiency.
백수곤(Soo-Gon Baek),류호근(Ho-Geun Ryu),최기현(Ki-Hyun Choi),양두환(Doo-Hwan Yang),백훈현(Hoon_Hyun Baek),이병인(Byung-In Lee),김건영(Kun-Young Kim) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
When the nuclear power plant reaches the end of their lives, the whole machineries inside the containment vessels, aux. building, fuel handling building should be dismantled. To dismantle the nuclear equipments, a remote controlled cutting robot is useful. In this paper, the current status of the dismantling robots and new cutting robot mechanism was proposed. The main purpose of this system is to penetrate into the internals of the metal component. The slider which is located between the front and rear bodies propels the cutting manipulator. Extendable base to adjust the height, Angle changer for body bending, multi leg for fixing the position of dismantling components have been developed to control motions of the robot.
백수곤(Soo-Gon Baek),이병인(Byung-In Lee),양두환(Doo-Hwan Yang),최기현(Ki-Hyun Choi),백욱현(Wook-Hyun Baek),김봉호(Bong-Ho Kim) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
The performance diagnostics regarding power plant piping - valve and hanger/support, detects and advises the plant manager how to inspect, correct conditions that could lead to piping systems failure, such as valve or hanger failure, to prevent the unplanned shutdowns and get the planned long time operation. To support in-plant technical managers in controlling routine inspection and repairs on plant piping systems, motor operated and air operated, hydro operted valve diagonic systems are introduced. For the hanger/support systems, hydro controlled performance technologies are introduced.
질소 가스 분위기에서 증착된 실리콘 질화막의 전기적, 광학적 특성 분석
공대영(Gong, Dae-Yeong),정우원(Jung, Woo-Won),양두환(Yang, Doo-Hwan),김선용(Kim, Sun-Yong),이용우(Lee, Yong-Woo),고지수(Ko, Ji-Soo),최병덕(Choi, Byoung-Deok),이준신(Yi, Jun-Sin) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
최근 태양전지 개발이 본격화 되면서 태양전지 웨이퍼 표면에서의 재결합에 의한 손실을 줄이고 반사도를 감소시키기 위한 ARC 개발이 활발히 진행되고 있다. 이를 위해 널리 사용하는 ARC 물질로 수소화된 실리콘 질화막이 있다. 수소화된 실리콘 질화막은 PECVD 법으로 저온에서 실리콘 기판 위에 증착 가능한 장점이 있다. 또한 실리콘 질화막의 광학적, 전기적인 특성은 화학적 조성비에 의해 결정되며 증착온도 가변에 따라 균일도 및 굴절률 조절을 가능케 하여 태양전지의 효율을 향상 시킬 수 있다. 따라서 본 연구에서는 수소화된 실리콘 질화막을 태양전지에 적용하기 위해 질소 가스 분위기에서 PECVD를 이용하여 증착하고 그 특성을 분석하였다. 박막은 0.8 Torr의 압력에서 150?C{sim}450?C의 기판 온도로 증착되었으며 이때의 RF power은 100W ~ 300W로 가변 하였다. 증착된 박막은 1.94 에서 2.23의 폭넓은 굴절률 값을 가지고 있었다. SiH₄/NH₃ 가스 비의 증가에 따라 박막 두께와 굴절률이 감소함을 확인 할 수 있었다. 이는 NH₃ 가스의 상대적인 증가에 따라 Si 생성을 선행하는 SiH₄ 가스의 부분압이 제한되기 때문이고, 이러한 결과로 박막내에 질소 원자가 증가함에 따라 N-H 결합이 증가하여 n-rich인 박막 상태가 되기 때문으로 분석된다. 증착된 실리콘 질화막의 소수반송자 수명 측정 결과 굴절률 2.23인 박막의 경우 약 87 us의 수명을 나타냈으며, 굴절률이 1.94로 줄어듦에 따라 소수반송자 수명 역시 79 us로 감소하였다. 수소화된 실리콘 질화막은 n-rich 보다 Si-rich 인 경우 effective 반송자 수명을 증가시켜 표면 재결합 속도를 줄이는데 유용함을 확인하였다. 또한 증착온도가 증가할수록, RF power가 증가 할수록 소수반송자 수명 역시 증가하였다. 반사도의 경우 SiH₄의 비율이 증가할수록 반사도가 감소함을 확인 하였으며, 증착온도 증가에 따라, RF power 증가에 따라 반사도가 감소하였다. 결과적으로 450?C의 기판온도와 300W의 RF power에서 증착된 실리콘 질화막의 경우 가장 우수한 전기적, 광학적 특성을 보여주었다.