http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실험 및 유한요소해석에 의한 SU-8 박막의 Tribological 특성 연구
양우열(Woo Yul Yang),신명근(Myounggeun Shin),김형만(Hyung Man Kim),한상철(Sangchul Han),성인하(In-Ha Sung) 대한기계학회 2013 大韓機械學會論文集A Vol.37 No.4
본 연구에서는 SU-8 박막의 마이크로시스템으로의 트라이볼로지적 응용을 목적으로 하여, 원자간 힘 현미경(AFM) 과 콜로이드 프로브를 이용한 실험 및 유한요소해석 기법을 이용하여 SU-8 코팅층의 두께에 따른 트라이볼로지적 특성을 고찰하였다. SU-8 시편은 스핀 코팅기법을 이용하여 두께를 다르게 하여 제작하였다. 실험결과 코팅두께가 증가함에 따라 마찰력과 점착력이 감소하여 박막두께에 따른 차이가 존재함을 알 수 있었고, SU-8 표면이 Si 표면에서보다 더 낮은 점착력과 마찰력을 보여주었다. 또한, 시뮬레이션을 통해 두께별로 박막 파손을 유발시키는 임계하중(압력)이 존재하며, 본 연구에서의 200~800 nm 두께범위에서는 1.2~1.8 GPa 로 측정되었다. In this study, two-dimensional finite element models were developed and experiments were conducted using an atomic force microscope to investigate the tribological characteristics of an SU-8 layer coated on a patterned wafer for microsystem applications. The results revealed that both the adhesion and the friction forces measured by the atomic force microscope were lower for the SU-8 coated surface than for the bare silicon surface. This is attributed to the hydrophobicity of SU-8. Another important result derived from the finite element analysis was the critical load required to fracture the SU-8 film with respect to the thickness. The critical loads for thicknesses of 200, 400, and 800 nm were approximately 13, 22, and 28 mN, respectively, which corresponded to a Hertzian contact pressure of 1.2?1.8 GPa. These results will aid in the design of a suitable SU-8 thickness for microsystem components that are in contact with one another.