http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
곽민환(Min Hwan, Kwak),강명권(Myung Kweon, Kang),김대용(Dea Yong, Kim),성연관(Yeon Kwan,Sung),송주태(Ju Tae,Song) 한국자동차공학회 2011 한국자동차공학회 지부 학술대회 논문집 Vol.2011 No.10-1
LPI Fuel Pump is equipment which is installed inside of cylinder, pressurize LPG fuel 5bar more than saturated vapor pressure to keep liquid phase of LPG throughout Fuel supply system. Installing fuel pump inside of cylinder is more reliable in aspect of fuel supply performance, but cost is expensive and maintenance is poor and dangerous. This paper shows the procedure of optimum design of new LPI fuel supply system which external fuel pump locates on the fuel feed line to improve maintenance quality and reduce cost of system. The purpose of this paper is to make better fuel supply performance of external LPI fuel pump than that of internal LPI fuel pump using Robust Design Method .
Urea-SCR 인젝터의 미립화 성능에 대한 실험적 연구
구건우(Kun Woo Ku),김성열(Sung Ryoul Kim),박종원(Jong Won Park),이충원(Choong Won Lee),홍정구(Jung Goo Hong),강명권(Myung Kweon Kang),김경남(Kyung Nam Kim),김재경(Jae Kyoung Kim) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
본 연구는 비교적 저압의 분사압력에서도 우수한 미립화 특성을 가지는 스월 인젝터를 Urea-SCR 시스템에 적용하기 위한 기초연구로서, 스월 인젝터의 SMD, 분무각, 액막의 분열과 같은 분무특성을 조사하였다. 그 결과를 정리하면 다음과 같다. 1. 스월 인젝터의 분무 형상은 분무가 진행됨에 따라 hollow cone 에서 solid cone 으로 변하였다. 노즐의 설계가 액막의 분열 특성에 영향을 끼치는 것으로 생각된다. 2. 분무각은 분사압력이 증가함에 따라 증가하였으며, 니들의 구동이 분무각에 영향을 끼쳤다. 분사압력에 상관 없이 분사 시작 후 initial jet 가 관찰되었으며, injection delay time 는 동일하였다. 3. 분무선단거리에 따른 SMD 는 분사압력이 증가함에 따라 감소하였다. 특히 분사압력 7.5bar 와 10bar 에서는 분무선단거리를 따라 SMD 가 증가한 후 다시 감소하는 구간이 나타났다. In this study, a swirl hollow cone injector, which has a good atomization performance at the low injection pressure relatively, was designed to apply the Urea-SCR. In order to investigate the spray pattern and SMD of a swirl injector, the spray visualization was conducted by using the simplex swirl injector, and the images of the spray cross-section were obtained from a sheet beam ofNd-Yag laser and a CCD camera. The SMD of the swirl injector was measured with the axial distance from the nozzle exit. The shape of the spray is converted from the hollow cone to solid cone along the distance from the injector exit. The spray angle is increased and the SMD is decreased with increasing injection pressure respectively