3단계 층화확률화응답모형

김종민,채성산,Kim, Jong-Min,Chae, Seong-S. 한국통계학회 2010 응용통계연구 Vol.23 No.3

직접면접으로 민감한 질문을 할때 발생하는 무응답이나 거짓응답의 문제를 개선하고자 Warner (1965)가 최초로 제안한 확률화응답모형에 관한 연구는 이후 많은 연구자들에 의해 개선, 발전되어 오고 있다. 본 연구에서 표본은 층화임의복원추출법에 의해 추출되었으며, 표본배분은 최적배분법에 의해 배분되었다. 한편, Kim과 Elam (2005)의 2단계 층화확률화응답모형을 확장한 3단계 층화확률화응답모형을 사용하였다. Kim과 Elam (2005)의 2단계 층화확률화응답모형과 상대효율을 비교한 결과 본 논문에서 제시한 3단계 층화확률화모형의 효율성이 상대적으로 높다는 결과가 도출되었다. 그러나 2단계확률화응답모형을 3단계로 확장함으로써 상대적으로 효율성은 증대되지만 반대로 조사과정의 어려움이 예상된다. Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.

영상 유도 방사선치료 시 Fiducial Marker의 Artifact에 관한 연구

김종민,김대섭,백금문,강태영,홍동기,윤화룡,권경태,Kim, Jong-Min,Kim, Dae-Sup,Back, Geum-Mun,Kang, Tae-Yeong,Hong, Dong-Ki,Yun, Hwa-Yong,Kwon, Kyeong-Tae 대한방사선치료학회 2010 대한방사선치료학회지 Vol.22 No.1

Purpose: The effect of artifact was analyzed, which occurs from fiducial marker during the liver Image Guided Radiation Therapy (IGRT) using the fiducial marker. Materials and Methods: The size of artifact of fixed fiducial marker and length of mobile fiducial marker locus were measured using the On-Board Imager system (OBI) and CT simulator, and 2D-2D matching and 3D-3D matching were carried out, respectively, and at this time, the coordinates transition value of couch was analyzed. Results: The measurement of fixed fiducial marker artifact size indicated CT 4.90, 8.10, 12.90, 19.70 mm and OBI 5.60, 10.60, 14.70, 29.40 mm based on the reference CT slice thickness of 1.25, 2.50, 5.00, and 10.00 mm. Meanwhile, the measurement of mobile fiducial marker locus length indicated CT 42.00, 43.10, 46.50 mm, and OBI 43.40, 46.00, 49.30 mm. The coordinates transition of 1.00, 2.00, and 8.00 mm occurred between 2D-2D matching and 3D-3D matching. Conclusion: It was confirmed that the therapy error increased during IGRT due to the influence of artifact when CT slice thickness increased. Thus, it may be desirable to acquire the image less than 2.50 mm in slice thickness when IGRT is implemented using the fiducial marker.

온도범위에 따른 비침습적 자기공명 온도측정방법의 최적화

김종민,조영승,김정희,이철현,오창현,Kim, Jong-Min,Kumar, Suchit,Jo, Young-Seung,Park, Joshua Haekyun,Kim, Jeong-Hee,Lee, Chulhyun,Oh, Chang-Hyun 대한의용생체공학회 2015 의공학회지 Vol.36 No.6

Noninvasive temperature monitoring is feasible with Magnetic Resonance Imaging (MRI) based on temperature sensitive MR parameters such as $T_1$ and $T_2$ relaxation times, Proton Resonance Frequency shift (PRFs), diffusion, exchange process, magnetization transfer contrast, chemical exchange saturation transfer, etc. While the temperature monitoring is very useful to guide the thermal treatment such as RF hyperthermia or thermal ablation, the optimization of the MR thermometry method is essential because the range of temperature measurement depends on the choice of the measurement methods. Useful temperature range depends on the purpose of treatment methods, for example, $42^{\circ}C$ to $45^{\circ}C$ for RF hyperthermia and over $50^{\circ}C$ for thermal ablation. In this paper, MR thermometry methods using $T_1$ and $T_2$ relaxation times and PRFs-based MR thermometry are tried on a 3.0 T MRI system and their results are reported and compared. In addition, the scanning protocol and temperature calculation algorithms from $T_1$ and $T_2$ relaxation times and PRFs are optimized for the different temperature ranges for the purpose of RF hyperthermia and/or thermal ablation.

십전대보탕가감방을 투여한 간세포암종 환자에서 범혈구감소증 호전 및 간수치 상승 증례

김종민,전형준,조종관,이연월,유화승,Kim, Jong-Min,Jeon, Hyung-Joon,Cho, Chong-Kwan,Lee, Yeon-Weol,Yoo, Hwa-Seung 대한한방내과학회 2013 大韓韓方內科學會誌 Vol.34 No.4

Objectives : To observe the therapeutic effects of an oriental herbal prescription in a hepatocellular carcinoma patient with splenomegaly and pancytopenia. Methods : Modified Sipjeondaebo-tang was prescribed three times a day to a hepatocellular carcinoma patient with splenomegaly and pancytopenia. Laboratory tests were carried out regularly to observe the therapeutic effects of the oriental herbal prescription for pancytopenia. Results : When treated with modified Sipjeondaebo-tang including Cinnamomi Cortex, the levels of white blood cells, red blood cells, hemoglobin, and hematocrit increased. However, aspartate transaminase, alanine transaminase, alkaline phosphatase, gamma-glutamic transpeptidase, total bilirubin, direct bilirubin levels also increased. Conclusions : Administering modified Sipjeondaebo-tang with Cinnamomi Cortex showed effect in improving pancytopenia but an increase in liver enzyme levels was also observed.

APR1000 원자로용기의 환경피로 평가

김종민,김용환,Kim, Jong Min,Kim, Yong Hwan 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.3

APR1000(Advanced Power Reactor 1000)은 기존의 OPR1000(Optimized Power Reactor 1000)에 60년 설계수명, 국부주파수제어운전, 0.3g 안전정지지진하중 적용 등의 향상된 설계특성(Advanced Design Feature)을 적용하여 개선한 수출형 1000MW 원전이다. 이 논문에서는 Reg. Guide 1.207에서 요구하는 원자로냉각재 환경을 고려한 피로 평가를 원자로용기에 대하여 평가하였다. 원자로용기에서 비교적 누적사용계수가 높은 출구노즐을 대상으로 평가를 수행하였으며 출구노즐은 구조적 건전성을 만족하는 것으로 평가되었다. APR1000(Advanced Power Reactor 1000) was developed to export 1000MW nuclear power plants by adding ADFs(Advanced Design Features) including 60 years design life, local frequency control operation, 0.3g SSE, etc. to OPR1000(Optimized Power Reactor 1000). In this paper, environmental fatigue analyses for the reactor vessel in APR1000 have been performed as per Reg. Guide 1.207. Outlet nozzle, which has a relatively high cumulative usage factor in the reactor vessel was evaluated and a structural integrity is maintained under the reactor coolant environment.

소아 Nutcracker 증후군의 자연 소실

김종민,최윤정,이재승,Kim, Jong-Min,Choi, Youn-Jung,Lee, Jae-Seung 대한소아신장학회 2006 Childhood kidney diseases Vol.10 No.2

Purpose : Nutcracker syndrome refers to compression of the left renal vein(LRV) between the aorta and superior mesenteric artery(SMA) that results in elevation of pressure in the LRV and development of collateral veins. It must be considered as a possible factor when hematuria or proteinuria occurs in a healthy child. The purpose of this study is to determine the time to spontaneous resolution in childhood nutcracker syndrome, and to observe whether this is affected by sex, age, proteinuria or initial ratio of peak velocity of LRV. Methods : We investigated 26 patients who were found to have spontaneous resolution by follow-up Doppler ultrasonography among 117 patients diagnosed with nutcracker syndrome by renal Doppler ultrasonography from May 2001 to December 2005. We determined the time to spontaneous resolution in childhood nutcracker syndrome, and observed whether the duration was affected by sex, age, proteinuria or initial ratio of peak velocity. Results : 26 patients(59%) achieved spontaneous resolution by 1.2 years(mean). The time to spontaneous resolution of childhood nutcracker syndrome in 26 patients was $16.71{\pm}9.99$ months(range 6.0-49.2). The time to spontaneous resolution was not affected by sex, age, proteinuria nor initial ratio of peak velocity of LRV. Conclusion : More than half of the patients who were diagnosed by renal Doppler ultrasonography achieved spontaneous resolution. The time to spontaneous resolution was not affected by sex, age, proteinuria nor initial ratio of peak velocity of LRV.

증상이 있는 청소년기 부주상골의 수술적 치료

김종민,정성훈,박병문,문찬삼,이길형,Kim, Jong-Min,Jung, Sung-Hoon,Park, Byeong-Mun,Moon, Chan-Sam,Lee, Kil-Hyeong 대한족부족관절학회 2010 대한족부족관절학회지 Vol.14 No.1

Purpose: To investigate the results of surgical treatment of the symptomatic accessory navicular in adolescent. Materials and Methods: 11 patients who were 11-16 years old with symptomatic accessory navicular were identified between 2001 and 2009. Six cases were diagnosed after trauma and 8 cases were diagnosed by accident with painful bony protrusion on medial aspect of foot. In cases after at least 3 months of ineffective conservative treatment, patients were treated by resection of accessory navicular and reattachment of tibialis posterior tendon to the apex of the medial longitudinal arch using periosteum and ligamentous soft tissue without transposition of its course. And then short leg cast was applied for correction of the flat foot (if it is combined) which was molded into the longitudinal arch with the talonavicular joint released and foot inverted during about 6 weeks. Results: All were type II accessory navicular without tibialis posterior tendon lesions. In most cases pain was improved, results were excellent in seven and good in four. Calcaneal pitch angle and talus-first metatarsal angle was improved about $4.64^{\circ}$ and $5.79^{\circ}$ in average. Conclusion: Symptomatic accessory navicular in adolescent might not be associated with the tibialis posterior tendon lesions. The surgical treatment composed of excision of the accessory navicular with simple replication of the tibialis posterior tendon without altering its course led to good results in most cases. The procedure has a low rate of complications. And it is easy to be performed with a good satisfaction.

순차 참조와 순환 참조들을 고려한 버퍼 캐쉬 관리 기법

김종민,최종무,김제성,이동희,노삼혁,민상렬,조유근,김종상,Kim, Jong-Min,Choe, Jong-Mu,Kim, Je-Seong,Lee, Dong-Hui,No, Sam-Hyeok,Min, Sang-Ryeol,Jo, Yu-Geun,Kim, Jong-Sang 한국정보과학회 2001 정보과학회논문지 : 시스템 및 이론 Vol.28 No.1

최근 버퍼 캐쉬의 성능을 향상시키기 위한 많은 블록 교체 기법들이 제안되었으며 이 중에서 작업 집합 (working set) 변화에 잘 적응하고 구현이 용이한 Least Recently Used (LRU) 블록 교체 기법이 널리 사용되고 있다. 그러나 LRU 블록 교체 기법은 블록들이 규칙적인 참조 패턴을 보이면서 순차 참조되거나 순환 참조될 때 이 규칙성을 적절히 이용하지 못해 성능이 저하되는 문제점을 가진다. 본 논문에서는 다중 응용 트레이스를 이용하여 LRU 블록 교체 기법의 문제점을 관찰하고, 이 문제점을 해결하는 통합된 형태의 효율적인 버퍼 관리 (Unified Buffer Management, 이하 UBM) 기법을 제안한다. UBM 기법은 순차 참조 및 순환 참조를 자동 검출하여 분리된 공간에 저장하고 이들 참조에 적합한 블록 교체 기법으로 이 공간을 관리한다. 또한 순차 참조와 순환 참조를 위한 공간과 나머지 참조를 위한 공간의 비율을 최적으로 할당하기 위해 온라인에서 수집된 정보를 이용하여 계산된 단위 공간 증가당 예상 버퍼 적중 증가율을 이용한다. 다중 응용 트레이스 기반 시뮬레이션 실험에서 UBM 기법의 버퍼 적중률은 LRU 블록 교체 기법에 비해 평균 12%, 최대 28%까지 향상된 결과를 보였다.

장대레일 궤도와 교량의 상호작용에 대한 매개변수 분석

김종민,한상윤,임남형,강영종,Kim. Jong-Min,Han. Sang-Yun,Lim. Nam-Hyoung,Kang. Young-Jong 한국방재학회 2007 한국방재학회 학술발표대회논문집 Vol.2007 No.1

CWR(Continuous Welded Rail) and bridge interaction produce rail force, bridge displacement and rail/bridge relative displacement. Each of these has limitation by many codes. In this paper, analysis of interaction has been carried out by using foreign codes(UIC 774-3 R code of Europe etc.) because there is no code about interaction between rail and bridge in Korea. Recently, railway bridges with CWR has been constructed for structural and economical reasons. When designer plans railway bridges, design a bridge model first and then investigate railway forces and displacement by interaction analysis. If these results go out bounds from limitation, designer plans railway bridges again and again. In this paper, using the parametric study on CWR and railway bridge interaction, railway bridge parameters such as length of bridge span, area of bridge, moment of inertia, stiffness of pier, etc. are presented. It helps preliminary design of railway bridges.

블루투스 기반 리튬인산철 배터리팩을 위한 BMS 모듈 알고리즘 개발에 관한 연구

김종민,류갑상,Kim, Jong-Min,Ryu, Gab-Sang 한국융합학회 2021 한국융합학회논문지 Vol.12 No.4

현재 자동차를 포함한 에너지 저장장치 제품에는 리튬 이온 배터리가 주로 사용되고 있으며, 이를 과충전하거나, 고온 상황에 방치하는 잘못된 배터리 관리 상황 발생시 폭발 등 위험한 상황에 노출될 수 있으며, 과방전 시 배터리 불능 상황을 야기한다. 이로 인해 배터리 상태를 관리해주는 시스템이 필요하며 배터리 관리 시스템은 배터리 상태를 정확하게 인지하고 각 셀의 전압을 일정하게 유지하여 최적의 배터리 효율을 얻는 데 목적이 있다. 본 논문에서는 일반적 리튬이온배터리에 비해 고안전성을 갖는 리튬인산철 배터리팩과 이를 관리하기 위해 Matlab Simulink 기반의 시뮬레이션을 사용하여 셀 특성을 확인할 수 있는 RC등가회로 모델을 이용한 분석방법을 제시하고, 저전력 및 상호통신간섭이 적은 블루투스 기반 BMS 모듈의 알고리즘을 개발하였다. Currently, lithium-ion batteries are mainly used in energy storage equipment products including automobiles. This can be exposed to dangerous situations such as explosions in the event of incorrect battery management conditions that are overcharged or left in high temperature conditions. It also causes a situation battery cannot be used when it has been over discharged. Therefore, a system that manages the state of the battery is required. The battery management system aims to obtain optimum battery efficiency by accurately recognizing the state of the battery and keeping the voltage of each cell constant. In this paper, we develop a lithium-iron phosphate battery that has higher safety than a general lithium-ion battery. Then, in order to manage this, we try to develop the algorithm of the BMS module based on the Bluetooth communication using the MATLAB-SIMULINK.